• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.21-28
• /
• 2009

In the present work, an attempt has been made to construct branching surface from 2-D contours, which are given at different layers and may have branches. If a layer having more than one contour and corresponds to contour at adjacent layers, then it is termed as branching problem and approximated by adding additional points in between the layers. Firstly, the branching problem is converted to single contour case in which there is no branching at any layer and the final branching surface is obtained by skinning. Contours are constructed from the given input points at different layers by energy-based B-Spline approximation. 3-D curves are constructed after adding additional points into the contour points for all the layers having branching problem by using energy-based B-Spline formulation. Final 3-D surface is obtained by skinning 3-D curves and 2-D contours. There are three types of branching problems: (a) One-to-one, (b) One-to-many and (c) Many-to-many. Oneto-one problem has been done by plethora of researchers based on minimizations of twist and curvature and different tiling techniques. One-to-many problem is the one in which at least one plane must have more than one contour and have correspondence with the contour at adjacent layers. Many-to-many problem is stated as m contours at i-th layer and n contours at (i+1)th layer. This problem can be solved by combining one-to-many branching methodology. Branching problem is very important in CAD, medical imaging and geographical information system(GIS).

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.551-556
• /
• 2009

3-D CAD (Computer Aided Design) system is an indispensable tool for manufacturing. A lot of engineers have studied for the methods to generate a curved surface on an N-sided shape, which is the basic technology of 3-D CAD systems. This surface generation, however, has three problems on the case of long and narrow shapes: the resultant surface is distorted, the surface is not continuous to adjacent surfaces, or additional user inputs are required to generate the surface. Conventional methods have not yet solved these problems at the same time. In this paper, we propose the method to generate internal curves that divide a long and narrow shape into regular N-sided sections so as to divide the shape into an N-sided section and four-sided ones. Our method controls the shape of internal curves by dividing an N-sided long and narrow shape into an N-sided section and four-sided ones, and solves distortion of the generated curved surface. In addition, each of the generated sections is interpolated with G1-continuous surfaces. This process does not require any user's further input. Therefore, the three problems mentioned above will be solved at the same time.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.393-402
• /
• 2006

The purpose of this study is to develop mechanisms of nD model-based design by the combination of 2D drawing standards and 3D building models from the current 2D and text-based design. The aim of this study can be archived by defining the 2D model extension definitions for the IFC model development and harmonizing existing 2D standards. The paper examines 1) 3D Representation of Building Element and Building Services element, and 2D Model extension of IFC2X.2, 2) Basic development of additional 2D element that should be added to IFC model, and 3) mapping method between current 2D standard and IFC2.X2. Following this approach, the interoperability problem between 3D model and 2D drawing can be solved and finally an extended data model could be developed.

• 대한치과보철학회지
• /
• 제52권2호
• /
• pp.67-73
• /
• 2014

연구 목적: 본 연구의 목적은 주조, 3-D printing laser sintered 및CAD/CAM technology를 이용한 milling 방법으로 제작된 치과용 코발트-크롬 합금의 기계적 물성을 비교하고 파절 단면의 미세 구조를 살펴보는 데 있다. 이를 통해 새롭게 소개된 제작 기법 - 3D-printing laser sintered - 이 치과용 합금 제작으로 적합한 지 알아보고자 한다. 연구 재료 및 방법: 36개의 flat disc 모양의 시편을 제작하여 제작 방법에 따라 세 집단으로 나누었다; 주조 방식으로 제작한 12개, laser sintering 방법으로 12개, CAD/CAM milling 방법으로 12개의 시편을 제작하여 표면 경도 시험을 시행하였다. 또한 각 집단 별로 12개의 dumbbell 모양의 시편을 제작하여 인장 강도 시험을 시행하였다. 통계량이 비모 수적 통계 분포를 보였으므로 Kruskal-Wallis 검정을 이용하여 각 실험군의 인장 강도 시험 결과를 비교했으며, 통계적 유의 수준은P=.05로 설정하여 Mann-Whitney 및 Bonferroni 사후 검정을 시행하였다. 전자 주사 현미경을 사용하여 파절 단면의 미세 구조를 관찰하였다. 결과: Vickers hardness test에서 세 집단간에 모두 유의한 차이가 있었고, 주조 방식으로 제작된 실험군에서 가장 큰 표면 경도(455.88 Hv)가, CAD/CAM milling으로 제작된 실험군에서 가장 낮은 표면 경도(243.40 Hv)를 나타냈다. 최대 인장 강도, 0.2% 항복강도, elongation 및 elastic modulus에서 세 집단간에 모두 유의한 차이가 나타났으며, CAD/CAM milling으로 제작한 실험군에서 가장 높은 최대 인장 강도(1442.94 MPa)가, laser sintered 실험군에서 가장 큰 0.2% 항복 강도(1136.15 MPa)가 나타났다. 파절 단면의 전자 주사 현미경 관찰 결과, 주조 시편에서는 독특한 성긴 모양과 전형적인 주조 다공성 구조가 관찰되었고, laser sintered 시편에서는 편평한 면을 동반한 거친 결정 구조가, 그리고 milled 시편에서는 균일하고 규칙적인 치밀 미세 구조가 나타났다. 결론: 서로 다른 제작 방법은 코발트-크롬 합금의 물리적 성질과 파절 단면의 미세 구조에 영향을 미쳤다. 주조 방식으로 제작된 시편에서 가장 큰 표면 경도가, milling으로 제작된 시편에서 가장 큰 인장 강도를 나타냈으며, 본 연구의 모든 실험군에서 치과용 합금의 ISO 기준에 부합하는 물성을 보였다.

• 한국결정학회지
• /
• 제13권2호
• /
• pp.86-90
• /
• 2002

X-선 회절법을 이용하여 N-(Diphenylmethylene)aminomethylphosphonate의 결정 구조를 규명하였다. 이 결정의 결정계는 삼사정계이며 공간군은 P(equation omitted)이다. 단위포 상수는 a＝8.967(2) (equation omitted), b＝9.309(2) (equation omitted), c＝ 10.981(2) (equation omitted), α＝101.42(2)°, β＝92.22(2)°, γ＝92.23(2)°, V=896.8(3) (equation omitted), T＝296 K, Z＝2, D/sub c/＝1.227 Mgm/sup -3/이다. 회절반점들의 세기는 Enraf-Nonius CAD-4 Diffracto-meter로 얻었으며 MoKα선(λ＝0.7107(equation omitted))을 사용하였다. 분자 구조는 직접법으로 풀었으며, F/sub o/>4σ(F/sub o/)인 979개의 독립 회절 데이터에 대하여 최소자승법으로 209개의 변수를 정밀화하여 최종 신뢰도 값 R＝7.3%을 얻었다.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.139-145
• /
• 2020

Purpose: This study is for the prosthesis of dog. Observed the occlusal relation between the small dog canine and carnassial teeth. The direction of the bite force was analyzed by 3D FEM(finite element method). Methods: The mandibular canine and carnassial of dog were tested. The skull of dog was contact point confirmed by dental CAD. The skull of dog was scaned using CT and a 3D model was created. The 3D model was analyzed ABAQUS. Closing movement has been 100N, 200N, 300N, 500N, 1000N, 1500N. The Direction of bite force was confirmed. Results: As occlusal force increased, the direction of bite force appeared to (-y), (-x,-y,-z), (-x,-y), (-x,-y,+z), (-x,-y,+ z), (+x,-y) in mandibular left canine. And the direction was seen at (+x, -y), (+x,-y,-z), (+x,-y), (-x,-y,+z), (-x,-y,+z), (+x,-y). When the occlusal load is 100 N, 200 N, 300 N, 500 N, the direction of the mandibular carnassial appears as (-x, -y, -z), and when the occlusal load is 1000 N, 1500 N, the direction appears as (-x,-y). Conclusion: The mandibular canine showed irregularities in the coordinates of the direction of the bite force, and the mandibular carnassial showed regularity in the coordinates of the direction of the bite force.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.120-127
• /
• 2019

PURPOSE. To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS. A total of 24 single crowns (N = 24 patients, age range: 18 - 50) were made from lithium disilicate (IPS E-max CAD), lithium silicate and zirconia based (Vita Suprinity CAD), resin matrix ceramic material (Cerasmart, GC), and dual matrix (Vita Enamic CAD) blocks. After digital impressions (Cerec 3D Bluecam, DentsplySirona), the crowns were designed and manufactured (Cerec 3, DentsplySirona). A dualcuring resin cement was used for cementation (Variolink Esthetic DC, Ivoclar). Then, measurement and recording of crowns and the opposing enamel surfaces with the intraoral scanner were made as well as at the third and sixth month follow-ups. All measurements were superimposed with a software (David-Laserscanner, V3.10.4). Volume loss due to wear was calculated from baseline to follow-up periods with Siemens Unigraphics NX 10 software. Statistical analysis was accomplished by Repeated Measures for ANOVA (SPSS 21) at = .05 significance level. RESULTS. After 6 months, insignificant differences of the glass matrix and resin matrix materials for restoration/enamel wear were observed (P>.05). While there were no significant differences between the glass matrix groups (P>.05), significant differences between the resin matrix group materials (P<.05) were obtained. Although Cerasmart and Enamic were both resin matrix based, they exhibited different wear characteristics. CONCLUSION. Glass matrix materials showed less wear both on their own and opposing enamel surfaces than resin matrix ceramic materials.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.63-66
• /
• 2003

Forged gears have the obvious advantages with the greater utilisation of raw material and high productivity over the machined gears. The forged bevel gear has been used in differential gear for automotive with a high reliance. On the other hand, the studies have been continued to improve the accuracy and expand the applying areas. In this paper, a whole manufacturing process for forged gear from die design and cold forging to heat-treatment was introduced. The stress and elastic deformation for forging die have been analysed by the 3D-FEM-package. The real elastic deformation of die was measured by the strain-gages. The elastic deformation of die was reached to 1mm, in terms of the present study. The analysed quantitative dimension of die was taken into consideration into the CAD/CAM data for forging die.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.79-88
• /
• 1998

This study deals with the development of CAM system which can machine and measure any shape of mold and die by machining center and coordinate measureing machine . The overall goal of the CAM system is to achieve the mold and die machining , from digitizing through to final cutting. The hardware of the system comprises PC and machining center. CMM. There are three steps in the mold and die machining. (1) measuring of physical model by the CMM, (2) geometric modeling by the CAD system, (3) generation of NC code by the tool path compensated for tool radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.959-968
• /
• 2000

Direct reaction of elemental silicon with a mixture of (dichloromethyl)silanes 1 $[Cl_3-nMenSiCHCl_2:$ n = 0 (a), n = 1(b), n = 2(c), n = 3(d)] and hydrogen chloride has been studied in the presence of copper catalyst using a stirred bed reactor equ ipped with a spiral band agitator at various temperatures from $240^{\circ}C$ to $340^{\circ}C.$ Tris(si-lyl) methanes with Si-H bonds, 3a-d $[Cl_3-nMenSiCH(SiHCl_2)_2]$, and 4a-d $[Cl_3-nMenSiCH(SiHCl_2)(SiCl_3)]$, were obtained as the major products and tris(silyl)methanes having no Si-H bond, 5a-d $[Cl_3-nMenSiCH(SiCl_3)_2]$, as the minor product along with byproducts of bis(chlorosilyl)methanes, derived from the reaction of silicon with chloromethylsilane formed by the decomposition of 1. In addition to those products, trichlorosilane and tetra-chlorosilane were produced by the reaction of elemental silicon with hydrogen chloride. The decomposition of 1 was suppressed and the production of polymeric carbosilanes reduced by adding hydrogen chloride to 1. Cad-mium was a good promoter for and the optimum temperature for this direct synthesis was $280^{\circ}C$.