• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.421-425
• /
• 2009

This research investigates the effect of copper retention on copper leaching in wood treated with copper-based preservatives. Radiata pine (Pinus radiata D. Don) sapwood samples were ground in a Wiley mill equipped with a 20-mesh screen. The ground wood was vacuum-treated with various concentrations of alkaline copper quat (ACQ), bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO), and copper azole (CUAZ). The treated samples were conditioned at $70^{\circ}C$ and 100% RH for 72 hours. The samples were leached by using the distilled water for four weeks, and the copper contents in each sample were measured by X-ray spectroscopy. As expected, the copper leaching was increased with increasing of copper retention. The copper leaching from the ACQ and CB-HDO treated samples were gradually decreased with increasing copper retention: however, the copper losses from the CUAZ treated samples appeared to be proportionally increased with the increase in copper retention in all retention levels tested. The results indicate that at the conditions of the same copper retention ACQ and CB-HDO treated wood have a better leaching resistance compared to CUAZ treated wood.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.172-177
• /
• 1999

Effect of fiber treatment with cellulase (Liftase A40), and with two refining methods (Valley beating and impact refining) on wood fiber and handsheet properties were investigated at three refining levels (300, 400, and 500ml) for two furnishes (NBKP and LBKP). Part of the treated furnishes were classified by 150 mesh screen into fine-free fiber, and fines. Fiber length analysis, WRV, zero-span strength, and other handsheet mechanical properties were compared. The study showed that Liftase A40 lowered the zero-span and the folding endurance of both furnishes (NBKP much more and LBKP much less). Pretreatment with Liftase A 40 followed by refining significantly lowered the fiber length and refining energy to reach to the target freeness. Impact refining, which is done by hitting the fibers vertically with rod at 20% solid content, kept the fiber length increased WRV, and improved handsheet mechanical properties much more than valley beating. Properties of fines from different sources were compared in detail in the study.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.37-43
• /
• 2006

Carbon nanotube cathodes (CNT cathodes) were fabricated by a screen printing method using multi-walled carbon nanotubes. The effects of surface treatment on CNT cathodes were investigated for use in high efficiency field emission displays. The optimum surface treatment for a CNT cathode is dependent on a relative bonding force of CNT films on the cathode after a heat treatment. Because of the high bonding force used in the Liquid method, this method is recommended for CNT cathodes which are heat-treated at $390^{\circ}C$ in a $N_2$ atmosphere. The Rolling method is applicable for CNT cathodes fabricated at $350^{\circ}C$ in an atmosphere of air. The results of this study provide basic criteria for the selection of an appropriate surface treatment for large area CNT cathodes.

• 대한지구과학교육학회지
• /
• 제8권1호
• /
• pp.76-86
• /
• 2015

The purpose of this study is to take advantage of the smart teaching - learning programs about the unit of 'Earth and Moon' and find out how to apply the effect appears. Teaching-Learning program was conducted over eight lessons. And we analyzed the effect of the program at any time through the evaluation and interview. The results are as follows. First, this study proposed a method to assist in the teaching and learning of spatial ability for students' movement of the Earth and the Moon. The program takes advantage of N-Screen Applications were configured to allow both Earth observation insider perspective and the external multilateral perspective. This improves students' understanding qualitatively. Second, we applied the teaching and learning programs utilizing smart smart devices, and the result was a lot of low rank students' average score rises. In addition, we were able to see that many students' understanding and interest, self-confidence are improved.

• 센서학회지
• /
• 제16권6호
• /
• pp.407-412
• /
• 2007

For $VO_{2}$ sensors applicable to temperature measurement by using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were investigated systematically as a function of the annealing condition. The starting materials, vanadium pentoxide ($V_{2}O_{5}$) powders, were mixed with vehicle to form paste. This paste was screen-printed on $Al_{2}O_{3}$ substrates and then $VO_{2}$ thick films were heat-treated at $450^{\circ}C$ to $600^{\circ}C$, respectively, for 1 hr in $N_{2}$ gas atmosphere for the reduction. As results of the temperature vs. resistance property measurements, the electrical resistance of the $V_{2}O_{5}$ sensor in phase transition range was decreased by $10^{3.9}$ order. The presented critical temperature sensor could be used in fire-protection and control systems.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1996년도 제10회 식물생명공학심포지움 고등식물 발생생물학의 최근 진보
• /
• pp.10-18
• /
• 1996

Recently, we have reported a rice MADS-box gene, OsMADS1, as a molecular factor triggering flower formation; this has been well studied in a heterologous system (Chung et al., 1994). In order to study whether the OsMADS1 homolog exists in other plant species, the OsMADS1 cDNA was used as a probe to screen a tobacco cDNA library, and a potential homolog, NtMADS3, was isolated. Sequence analysis revealed that the gene shares 56.1% identity in whole amino acids with OsMADS1. Like OsMADS1, the NtMADS3 gene starts to express at a very early stage of flower development, and the expression continues up to flower maturation. In the tobacco flower, the gene is expressed in whorl 2,3 and 4, corresponding to the petal, stamen, and carpel, respectively. Upon ectopic expression in the homologous system, NtMADS3 caused a trasition from inflorescence shoot meristem into floral meristem, reducing flowering time dramatically. These phenotypes strongly suggest the NtMADS3 gene is the OsMADS1 homolog of tobacco. Hybrids between the OsMADS1 and the NtMADS3 plants were also generated. The hybrids flowered even earlier than these two transgenic plants. The detailed studies are discussed here.

• 스마트미디어저널
• /
• 제1권4호
• /
• pp.35-43
• /
• 2012

이 논문에서는 스마트TV 현황을 살펴보고, 바뀐 스마트 생태계에서 자막정보를 이용한 새로운 스마트 TV 사업 모형을 제시하였다. 현재 우리사회는 스마트 TV에 대한 긍정적인 견해와 유보적 견해가 있음에도 불구하고 스마트 TV로의 큰 변화는 우리 시대에 거부 할 수 없는 큰 물결이며, 점진적으로 스마트 TV를 중심으로 모든 사회가 바뀌어나갈 수밖에 없다. 따라서 이 논문에서는 양방향, 능동적, 소비자 중심의 스마트TV환경에서 자막정보를 이용한 새로운 스마트 TV 사업 모형을 설계하였다. 끝으로, 제안된 자막정보를 이용한 스마트 TV 사업모형은 한류 시대에 국가 간 정보의 격차를 줄이고 한류를 확산하는 데 일익 할 것이 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.345-345
• /
• 2007

본 연구는 x선 영상검출기 적용을 위한 $HgI_2$ 필름의 누설전류 특성 향상을 위한 연구로서, $HgI_2$기반의 다양한 물질을 이용하여 다층구조 방식으로 제작된 필름의 누설전류 특성평가 및 제작된 다층구조의 상부전극물질의 변화에 따른 누설전류 특성을 평가하였다. $HgI_2$기반 다층구조의 제작 물질은 Parylene, $PbI_2$, a-Se을 사용하여 시편(parylene/ITO, ITO/$HgI_2/PbI_2$/ITO, ITO/$HgI_2$/a-Se/ITO)을 제작하였으며, 필름 제작공정은 Screen print, PVD공정으로 다층구조 필름을 제작하였다. 또 한, 다층구조로 제작된 필름에 상부 전극물질은 Au, In, ITO를 사용하여 누설전류의 특성을 평가하였다. 측정 장치로 DC Power Supply(556H. EG&G : 50~200V), X 선 발생장치(Toshiba KXO-50N), 차폐체 (Al 및 Cu), Oscilloscope (LeCroy, LC334AM, USA), Electrometer (Keithley, 6517), Ion chamber 2060 (Radical Co.)을 이용하여, 제작된 $HgI_2$기반 다층구조 sample의 누설전류 특성을 실험하였다. 이 결과로 다층구조에 제작된 물질 및 상부전극에 따른 누설전류의 특성을 평가하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제14권2호
• /
• pp.81-85
• /
• 2007

White Muscardine is the most common fungal disease of silkworm, Bombyx mori L. caused by the pathogenic fungus, Beauveria bassiana (Balsamo) Vuillemin. In the present investigation, an attempt has been made to screen locally available medicinal/ weed plants against Beauveria bassiana. Among the plant extracts (PE) tested, 5% aqueous crude extract of the bulb of Allium sativum (Garlic) has been found to be most effective against Beauveria bassiana. The radial growth of Beauveria bassiana in vitro was inhibited to the tune of 54.9% in aqueous extract and 54.4% in ethanolic extract of Allium sativum and correspondingly mycelial dry weight gave rise to 110.7 mg and 108.7 mg against 201.7 mg in control 15 days post treatment. Similarly, silkworm larvae topically inoculated with the Beauveria bassiana conidia ($1.8{\times}10^6/ml$) registered survival up to 53.0% against 0.0% in control after treatment with aqueous extract of Allium sativum. Simultaneously, as a preventive measure, silkworm larvae were put to rear in conidia contaminated seat paper instantly treated with aqueous extract of Allium sativum that also increased survival up to 61.0% against 4.6% in control. It is also observed that the plant extract is absolutely innocuous to silkworm.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 춘계학술발표대회
• /
• pp.985-988
• /
• 2015

최근 다양한 ICT기술의 발전으로 인간의 사회, 문화, 교육 등의 많은 분야에 변화가 일어나고 있으며, 많은 기술들이 인간 삶의 영역에 적지 않은 영향을 미치고 있다. 그 중에서도 인터넷 웹 표준 기술의 발전은 e-book 시장과 교육용 콘텐츠의 변화가 많을 것으로 예측하고 있다. 따라서 본 논문에서는 N-Screen 지원과 반응형 웹 기술 지원을 위한 3차원 상호작용기반의 e-book 콘텐츠 저작도구 플랫폼 설계를 연구하였으며, 6가지 영역의 상호작용 콘텐츠 개발이 웹 표준에 의해 저작될 수 있는 저작도구 모형을 연구 개발 하였다. 본 논문에서 제안한 e-book의 저작 형태는 웹 표준 기술 HTML5와 ePub3.0 표준을 기반으로 제작할 수 있도록 콘텐츠 플랫폼을 설계 하였으며, 사용자와의 상호작용, 시뮬레이션 등의 기능을 쉽고 빠르게 제작할 수 있는 사용자 인터페이스를 연구 적용하였다. 향후 본 연구의 결과로 전자책 산업 발전과 교육 분야의 활용 향상을 기대하고 있으며, 지식의 체계를 좀 더 다양하게 제공 할 수 있는 e-book 콘텐츠 연구의 원천이 되기를 기대한다.