• 천문학회지
• /
• 제28권1호
• /
• pp.61-65
• /
• 1995

We discuss a model4-dimensional Friedmann cosmology which may have evolved from a model of 4+D dimensions which admits spontaneous compactification of D dimensions (or N-dimensional variants of the Brans-Dicke (BD) theory). The BD parameter appearing in dimensional reduction is negative $-1<\omega<0$ (for the N-dimensional variants of the BD theory, $-1.5{\leq}{\omega})$. We find that if there had been inflationary transtion to the standard big-bang model, the Universe can undergoe a polar-type expansion during when the gravitational coupling becomes negative. The unique feature is that for the negative w, the density parameter of the post-inflationary Universe falls in a range 0<0<1 even if the Universe is geometrically flat (k = 0).

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.295-304
• /
• 2005

본 논문에서는 워드지향 메모리 내에서 셀 사이의 커플링 결함을 검출하기 위한 고갈 테스트 발생(exhaustive test generation) 문제를 연구하였다. 셀 사이의 거플링 결함 모델에 따르면 n 워드를 갖는 메모리 내에서 w-비트 메모리 내용 또는 내용의 변화는 메모리 내의 s-1 워드 내용에 따라 영향을 받는다. 이때 검사 패턴 구성을 위한 최적의 상호작용 방법을 제안 하였으며, 제안한 검사 결과의 체계적인 구조는 간단한 BIST로 구현하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권12호
• /
• pp.1458-1467
• /
• 1999

VLSI 공정 기술이 발달하면서 이웃한 전선 간의 간격이 점점 더 가까워 지고 있으며, 그에 따라 인접 전선 간의 혼신 문제가 심각해지고 있다. 본 논문에서는 3층 그리드 채널 배선에 적용 가능한 혼신을 최소화시키는 배선층 할당 방법을 제안한다. 이 방법은 선형 의사 불린 최적화 기법에 맞도록 고안되었으며, 적절한 변수 선택 휴리스틱과 상한값 추정 방법을 통하여 최적의 결과를 짧은 시간 안에 찾아낸다. 실험 결과를 통하여, 일반적인 0/1 정수 선형 프로그래밍 기법과 비교하여 성능과 수행시간 면에서 우수함을 보인다. Abstract Current deep-submicron VLSI technology appears to cause crosstalk problem severe since it requires adjacent wires to be placed closer and closer. In this paper, we deal with a horizontal layer assignment problem for three layer HVH channel routing to minimize coupling capacitance, a main source of crosstalk. It is formulated in a 0/1 integer linear programming problem which is then solved by a linear pseudo boolean optimization technique. Experiments show that accurate upper bound estimation technique effectively reduces crosstalk in a reasonable amount of running times.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.9-14
• /
• 2022

실리카 에어로겔은 매우 낮은 밀도, 고비표면적을 갖는 다공성 물질로 구조적 특성으로 인한 취약한 기계적 특성 때문에 응용이 제한되어 이를 해결하기 위한 폴리머와의 다양한 복합화 기술이 제안되어 왔다. 본 연구에서는 에어로겔의 기계적 강도를 향상시키고자 폴리이미드가 가교된 실리카 에어로겔을 합성하였다. 실리카 에어로겔을 만들기 위한 전구체로 tetraethyl orthosilicate(TEOS)가 사용되었고, 3-Aminopropyltriethoxysilane(APTES)은 폴리이미드와 가교 결합을 하기 위한 coupling agent로 사용되었다. 폴리이미드는 pyromellitic dianhydride, 3, 5-diaminobenzoic acid를 사용해 합성되었고 ${\frac{n_1}{n_2}}={\frac{n}{n+1}}$의 반응식을 사용해 폴리이미드 체인의 반복 단위 수가 10인 폴리이미드를 가교 결합하여 기계적 물성이 향상된 실리카 에어로겔을 구현하였다. 겔화 전에 다양한 중량비를 갖는 폴리이미드를 첨가하여 최대 압축 강도가 실리카 에어로겔 대비 19배 이상 증가가 관찰되어 폴리머 가교결합을 통한 실리카 에어로겔의 기계적 강도가 크게 개선될 수 있음을 확인하였다.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.167-175
• /
• 2012

Service-oriented Architecture(SOA) is one of the most recent trends in IT solutions. SOA is a paradigm for organizing and utilizing distributed capabilities that may be under the control of different ownership domains and implemented using various technology stacks. From a technical perspective SOA, can be considered a method for designing and developing IT systems where applications are constructed from loosely coupled and autonomous building blocks. And SOA is a very effective response to the problems faced by companies in terms of reusability, interoperability and reduce coupling between systems that implement their information systems. To exploit these advantages many organizations have decided to evolve their legacy systems towards this architecture. This paper proposes a modeling for SOA based business process generation and testing, and introduces its implementation in the BPEL. And we analyze business process between enterprises, modeling the service-oriented business process with BPEL to realization level. Also, we suggests that UML is used from high-level business problems to the process of low-level problem for Visual and effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 1995

Finite element analysis tool was developed to analyze the casting process. Generally, casting processes consists of mold filling and solifification. In order to investigate the effects of process variables and to predict the defects, both filling and solidiffication process were simulated simultaneously. At filling process, especiallywe consider thermal coupling to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simulation of the actual casting processes. At mold filling process, Lagrangian-type finite element method with automatic remashing scheme was used to find the material flow. To avoid numerical instability in low viscous fluid, a perturbation method with artificial viscosity is adopted. At solififfication process, enthalpy-based finite element method was used to solve the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidiffication time, position of solidus line, liquidus line and thermal residual stress are studied. Finite element tools developed in this study will be used process design of casting process and maybe basic structure for total CAE system of castigs which will be constructed afterward.

• Advances in nano research
• /
• 제7권5호
• /
• pp.325-335
• /
• 2019

In the present study, nonlocal strain gradient theory (NSGT) is developed for wave propagation of functionally graded (FG) nanoscale plate in the thermal environment by considering the porosity effect. $Si_3N_4$ as ceramic phase and SUS304 as metal phase are regarded to be constitutive material of FG nanoplate. The porosity effect is taken into account on the basis of the newly extended method which considers coupling influence between Young's modulus and mass density. The motion relation is derived by applying Hamilton's principle. NSGT is implemented in order to account for small size effect. Wave frequency and phase velocity are obtained by solving the problem via an analytical method. The effects of different parameters such as porosity coefficient, gradient index, wave number, scale factor and temperature change on phase velocity and wave frequency of FG porous nanoplate have been examined and been presented in a group of illustrations.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.387-396
• /
• 2005

The Rotational/Translational Actuator (RTAC) benchmark problem considers a fourth-order dynamical system involving the nonlinear interaction of a translational oscillator and an eccentric rotational proof mass. This problem has been posed to investigate the utility of a rotational actuator for stabilizing translational motion. In order to experimentally implement any of the model-based controllers proposed in the literature, the values of model parameters are required which are generally difficult to determine rigorously. In this paper, an approach to the least-squares estimation of the parameters of a system is formulated and practically applied to the RTAC system. On the other hand, this paper shows how to model a nonlinear system as a linear uncertain system via nonparametric system identification, in order to provide the information required for linear robust $H_\infty$ control design. This method is also applied to the RTAC system, which demonstrates severe nonlinearities, due to the coupling from the rotational motion to the translational motion. Experimental results confirm that this approach can effectively condense the whole nonlinearities, uncertainties, and disturbances within the system into a favorable perturbation block.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.65-73
• /
• 1986

Experiment have been conducted about thin oxide characteristics according to O2/N2 ratio needed for EEPROM cell fabrication. As a result, we think that there is no problem even if we grow oxide layer with large O2/N2 ratio and short exidation time and when the water is implated by As before oxidation, the oxide breakdown field is about IMV/cm lower than that is not implanted. Especially, the thin oxide characteristic seems to be affected largely by wafer cleaning and oxidation in air. On the basis of these, tunnel type EEPROM cell is fabricated by 3um CMOS process and its characteristic is studied. Tunnel oxide thickness(100\ulcorner is chosen to allow Fowler-Nordheim tunneling to charge the floating gate at the desired programming voltage and tunnel area(2x2um\ulcorneris chosen to increase capacitive coupling ratio. For program operation, high voltage (20-22V) is applied to the control gate, while both drain and source are gdrounded. The drain voltage for erase is 16V. It is shown that charge retention characteristics is not limited by leakage in the oxide and program/erase endurance is over 10E4 cycles of program erase operation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.174-174
• /
• 2000

A strong antiferromagnetic coupling in Fe/Si multilayered films (MLF) had been recently discovered and much consideration has been given to whether the coupling in the Fe/Si MLF system has the same origin as the metal/metal MLF. Nevertheless, the nature of the interfacial ron silicide is still controversial. On one hand, a metal/ semiconductor structure was suggested with a narrow band-gap semiconducting $\varepsilon$-FeSi spacer that mediates the coupling. However, some features show that the nature of coupling can be well understood in terms of the conventional metal/metal multilayered system. It is well known that both magneto-optical (MO) and optical properties of a metal depend strongly on their electronic structure that is also correlated with the atomic and chemical ordering. In this study, the nature of the interfacial regions is the Fe/Si multilayers has been investigated by the experimental and computer-simulated MO and optical spectroscopies. The Fe/Si MLF were prepared by rf-sputtering onto glass substrates at room temperature with the number of repetition N=50. The thickness of Fe sublayer was fixed at 3.0nm while the Si sublayer thickness was varied from 1.0 to 2.0 nm. The topmost layer of all the Fe/Si MLF is Fe. In order to carry out the computer simulations, the information on the MO and optical parameters of the materials that may constitute a real multilayered structure should be known in advance. For this purpose, we also prepared Fe, Si, FeSi2 and FeSi samples. The structural characterization of Fe/Si MLF was performed by low- and high -angle x-ray diffraction with a Cu-K$\alpha$ radiation and by transmission electron microscopy. A bulk $\varepsilon$-FeSi was also investigated. The MO and optical properties were measured at room temperature in the 1.0-4.7 eV energy range. The theoretical simulations of MO and optical properties for the Fe/Si MLF were performed by solving exactly a multireflection problem using the scattering matrix approach assuming various stoichiometries of a nonmagnetic spacer separating the antiferromagnetically coupled Fe layers. The simulated spectra of a model structure of FeSi2 or $\varepsilon$-FeSi as the spacer turned out to fail in explaining the experimental spectra of the Fe/Si MLF in both intensity and shape. Thus, the decisive disagreement between experimental and simulated MO and optical properties ruled out the hypothesis of FeSi2 and $\varepsilon$-FeSi as the nonmagnetic spacer. By supposing the spontaneous formation of a metallic ζ-FeSi, a reasonable agreement between experimental and simulated MO and optical spectra was obtained.