• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.523-532
• /
• 2007

This study utilized the 1/25,000 topographic map of the upper area from the Geum-ho watermark located at the middle of Geum-ho river from the National Geographic Information Institute. For the analysis, first, the influence of the size of critical area to the hydro topographic factors was examined changing grid size to $10m{\times}10m,\;30m{\times}30m\;and\;50m{\times}50m$, and the critical area for the formation of a river to $0.01km^2{\sim}0.50km^2$. It is known from the examination result of watershed morphology according to the grid size that the smaller grid size, the better resolution and accuracy. And it is found, from the analysis result of the degree of the river according to the minimum critical area for each grid size, that the grid size does not affect on the degree of the river, and the number of rivers with 2nd and higher degree does not show remarkable difference while there is big difference in the number of 1st degree rivers. From the results above, it is thought that the critical area of $0.15km^2{\sim}0.20km^2$ is appropriate for formation of a river being irrelevant to the grid size in extraction of hydro topographic parameters that are used in the runoff analysis model using topographic maps. Therefore, the GIUH model applied analysis results by use of the river level difference law proposed in this study for the explanation on the outflow response-changing characters according to the decision of a critical value of a minimum level difference river, showed that, since an ogival occurrence time and an ogival flow volume are very significant in a flood occurrence in case of not undertow facilities, the researcher could obtain a good result for the forecast of river outflow when considering a convenient application of the model and an easy acquisition of data, so it's judged that this model is proper as an algorism for the decision of a critical value of a river basin.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.244-251
• /
• 1992

Buried Bragg filters of single mode $Si_{3}N_{4}$ rib waveguide with a cover layer of $SiO_{2}$ and grating at the interface of $Si_{3}N_{4}$ and $SiO_{2}$ are designed and fabricated. Etching of the grating on $Si_{3}N_{4}$ waveguide core by buffered HF showed uniform etching with good control up to 1 nm. This buried type of Bragg filters are immune to contamination of the surface of device. The mode index and bandwidth of filters are determined by measurements of the transmission spectrum of Bragg filters and compared with that of calculation. Waveguide Bragg filters loaded with the micro-heater of Cr film and the cladding of silicone rubber are made to control the Brag wavelength of the filter. As a result the filter wavelength of the device moved by 0.41 nm for 10 mA current to the shorter side of wavelength proportional to the square of the current.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.202-207
• /
• 2004

In the present study a mesh generation program has been developed by using DXF file. The program consists of DXF file reading and mapping algorithm, which projects the 2-D mesh point onto the triangular surface constructed by nearest three points. The present program has been tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.181-181
• /
• 2004

3 차원 형상측정기술(3-D Profile Measurement Method)은 가공품의 치수검사 및 형상측정 등의 공학분야뿐만 아니라 최근에는 의류산업 및 의학산업은 물론 오락산업의 가상현실 구현 등 여러 분야로 점차 사용이 확대되고 있다. 이러한 요구를 만족시킬 수 있는 광학을 바탕으로 한 비접촉 3 차원 형상측정방법(Non-contacting 3-D Profile Measuring Method)은 고속, 고정밀도 측정이 가능하기 때문에 활발히 연구되고 있다. 광학을 이용한 대표적인 3 차원 비접촉 측정방법의 하나인 영사식 무아레는 그림자식 무아레의 단점인 격자의 크기가 측정물체보다 커야 한다는 점과 측정물체와 격자사이의 거리 제한 문제를 해결하였으며, 위상이동법을 사용함으로서, 무아레 무늬 형태의 영향을 받지 않고 측정이 가능해졌다.(중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.94-98
• /
• 2006

미계측 유역에 대한 정확한 수문반응을 예측하기 위해 수문반응 모의할 때 발생하는 불확실성을 예측하고 감소시킬 필요가 있다. 이러한 불확실성은 사용가능한 자료의 질과 양에 따라 달라지므로, 자료의 해상도는 수문반응 예측에서 중요한 요소가 된다. 그러므로 본 연구에서는 격자크기가 수문모형의 강우-유출응답모의에 어떠한 영향을 미치는지 살펴보았다. 격자크기가 입력데이터의 정보 손실을 발생시키지 않는 경우의 모형의 불확실성을 조사하기 위하여, 2차 및 3차 하천차수와 유역면적의 증가를 고려한 4가지 가상유역을 구성 하였다. 50m, 100m, 250m, 500m, 1000m의 격자를 사용하여 강우-유출모의를 수행하고, 격자에 따른 모의결과를 비교하기 위해 유출구의 수문곡선을 작성하였다. 또한, 소유역에서 하천으로 유입되는 단위길이당 유량과 하천의 합류점 전..후 및 유출구의 하천유량에 대한 Nash 계수를 산정하고 비교하였다. 기준이 된 격자크기와의 차가 큰 격자가 사용된 경우 모의된 수문반응의 차이는 증가하였고, 대상 유역의 면적이 커질수록, 하천차수가 작을수록 그 차이는 감소하였다. 소유역에서 하천으로 유입되는 단위폭당 유량의 오차는 흐름길이가 증가할수록 감소하였다. 흐름길이가 일정한 소유역으로만 구성된 가상유역 I, II에 대한 수문모의에서 하천유량의 오차는 하천을 따라 증가한 반면, 각기 다른 흐름길이의 소유역으로 구성된 가상유역 III, IV의 경우, 오차는 하천의 흐름에 따라 일정한 경향을 갖지 않고, 하천의 합류를 통해 증가되거나 감소하였다. 이 경우, 유역 유출구의 총체적 수문반응의 오차는 1차 하천의 합류후 발생한 최대오차보다 작았다.량을 산출하여 하천환경정비를 위한 기초자료로서 활용 될 수 있도록 하였다.구에 맞는 작물 생산 및 농촌관광단지 조성을 통해 부가가치증대 및 소득증대를 꾀함으로 농촌문제 해결에 도움이 될 것으로 기대된다. 본 연구를 통해 GIS 와 RS의 기술이 농촌분야에 더 효율적으로 적용될 것으로 기대되며, 농업기술센터를 통한 정보제공을 함으로써 대농민 서비스 및 농업기관의 위상이 제고 될 것으로 기대된다.여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.

• 한국전자현미경학회:학술대회논문집
• /
• 1998.05a
• /
• pp.56-57
• /
• 1998

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.327-334
• /
• 2013

Long-wave infrared detectors using the type-II InAs/GaSb strained superlattice (T2SL) material system with the nBn structure were designed and fabricated. The band gap energy of the T2SL material was calculated as a function of the thickness of the InAs and GaSb layers by the Kronig-Penney model. Growth of the barrier material ($Al_{0.2}Ga_{0.8}Sb$) incorporated Te doping to reduce the dark current. The full width at half maximum (FWHM) of the $1^{st}$ satellite superlattice peak from the X-ray diffraction was around 45 arcsec. The cutoff wavelength of the fabricated device was ${\sim}10.2{\mu}m$ (0.12 eV) at 80 K while under an applied bias of -1.4 V. The measured activation energy of the device was ~0.128 eV. The dark current density was shown to be $1.0{\times}10^{-2}A/cm^2$ at 80 K and with a bias -1.5 V. The responsivity was 0.58 A/W at $7.5{\mu}m$ at 80 K and with a bias of -1.5 V.

• Journal of Korea Water Resources Association
• /
• v.31 no.5
• /
• pp.599-612
• /
• 1998

Numerical analysis of convection-dominated transport problems are challenging because of dual characteristics of the governing equation. In the finite element method, a strategy is to modify the test function to weight more in the upwind direction. This is called as the Petrov-Galerkin method. In this paper, both N+1 and N+2 Petrov-Galerkin methods are applied to transport problems at high grid Peclet number. Frequency fitting algorithm is used to obtain optimal levels of N+2 upwinding, and the results are discussed. Also, a new Petrov-Galerkin method, named as "Optimal Test Function Petrov-Galerkin Method," is proposed in this paper. The test function of this numerical method changes its shape depending upon relative strength of the convection to the diffusion. A numerical experiment is carried out to demonstrate the performance of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.9-16
• /
• 2012

In this paper, we propose the two dimensional variable-length vector storage format which can be used for efficient storage of sparse matrix in the FEM (finite element method). The proposed storage format is the method storing only actual needed non-zero values of each row on upper triangular matrix with the total rows N, by using two dimensional variable-length vector instead of $N{\times}N$ large sparse matrix of entire equation of finite elements. This method only needs storage spaces of the number of minimum 1 to maximum 5 in 2D grid structure and the number of minimum 1 to maximum 14 in 3D grid structure of analysis target. The number doesn't excess two times although involving index number. From the experimental result, we can find out that the proposed storage format can reduce the memory space more effectively, as the total number of nodes increases, than the existing skyline storage format storing maximum column height.

• Journal of KIISE
• /
• v.44 no.11
• /
• pp.1178-1193
• /
• 2017

It is very important to understand system behaviors in collective pattern for each knowledge domain. However, there are structural limitations to represent collective behaviors because of the size of system components and the complexity of their interactions, causing the state explosion problem. Further composition with other systems is mostly impractical because of exponential growth of their size and complexity. This paper presents a practical method to model the collective behaviors, based on a new concept of domain engineering: behavior ontology. Firstly, the ontology defines each collective behavior of a system from active ontology. Secondly, the behaviors are formed in a quantifiably abstract lattice, called common regular expression. Thirdly, a lattice can be composed with other lattices based on quantifiably common elements. The method can be one of the most innovative approaches in representing system behaviors in collective pattern, as well as in minimization of system states to reduce system complexity. For implementation, a prototype tool, called PRISM, has been developed on ADOxx Meta-Modelling Platform.