• 제목/요약/키워드: n/w value

검색결과 460건 처리시간 0.023초

SOLUTIONS FOR A CLASS OF FRACTIONAL BOUNDARY VALUE PROBLEM WITH MIXED NONLINEARITIES

  • Zhang, Ziheng
    • 대한수학회보
    • /
    • 제53권5호
    • /
    • pp.1585-1596
    • /
    • 2016
  • In this paper we investigate the existence of nontrivial solutions for the following fractional boundary value problem (FBVP) $$\{_tD_T^{\alpha}(_0D_t^{\alpha}u(t))={\nabla}W(t,u(t)),\;t{\in}[0,T],\\u(0)=u(T)=0,$$ where ${\alpha}{\in}(1/2,1)$, $u{\in}{\mathbb{R}}^n$, $W{\in}C^1([0,T]{\times}{\mathbb{R}}^n,{\mathbb{R}})$ and ${\nabla}W(t,u)$ is the gradient of W(t, u) at u. The novelty of this paper is that, when the nonlinearity W(t, u) involves a combination of superquadratic and subquadratic terms, under some suitable assumptions we show that (FBVP) possesses at least two nontrivial solutions. Recent results in the literature are generalized and significantly improved.

W-B-C-N 확산방지막에서 질소농도에 따른 Stress 에 대한 연구

  • 소지섭;이창우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.72-73
    • /
    • 2005
  • Stress behavior was studied to investigate the internal behaviors of boron, carbon, and nitrogen in the 1000${\AA}$-thick tungsten boron carbon nitride (W-B-C-N) thin films. The impurities in the W-B-C-N thin films provide stuffing effects that were very effective for preventing the interdiffusion between interconnection metal and silicon substrate during the subsequent high temperature annealing process. The resistivity of W-B-C-N thin film decreases as an annealing temperature increase. The W-B-C-N thin films have compressive stress, and the stress value decreased up to $4.11\times10^{10}dyne/cm^2$ as an $N_2$ flow rate increases up to 3 sccm.

  • PDF

Determination of Critical Nitrogen Concentration and Dilution Curve for Rice Growth

  • Lee, Byun-Woo;Cui, Ri-Xian;Kim, Min-Ho;Kim, Jun-Hwan;Nam, Hong-Shik
    • 한국작물학회지
    • /
    • 제47권2호
    • /
    • pp.127-131
    • /
    • 2002
  • Critical nitrogen concentration (Nc), which is defined as the minimum % N in shoots required to maintain the maximum growth rate of top dry weight (W) at any time, was determined for rice plant. Using two rice varietal groups, japonica varieties and an indica $\times$ japonica "Dasanbyeo", 18 data points fulfilling the statistical criteria for determining Nc were obtained through eight N-fertilization experiments over two years at Suwon (37$^{\circ}$16'N), Korea. Nc dilution curve for each variety was obtained by fitting the Nc-W relationship to power function. However, The critical nitrogen curves for the two variety groups were not different statistically. Thus, a Nc dilution curve was fitted for the Nc data points pooled over the two variety groups and proposed in rice as: Nc=4.08, where W<1.73 t h $a^{-1}$ , Nc=5.197 $W^{0.425}$3/ ($R^2$=0.964), where 1.73 t h $a^{-1}$ <W<12 t h $a^{-l}$. The Nc for W<1.73 t h $a^{-l}$ were estimated as a constant value of 4.08%, the mean value of the maximum N concentration for N-limiting condition and the minimum N concentration for N non-limiting condition. The model for Nc is applicable to diagnosing the nitrogen nutrition status during the rice growth period from emergence to heading stage. The Nc curve well discriminated the 144 data points between the N limiting and the N non-limiting groups regardless of varieties, cultural methods, and years.-limiting groups regardless of varieties, cultural methods, and years.

수치해석 결과를 이용한 PHC-W흙막이공법의 거동에 관한 연구 (A Study on the Behavior of PHC-W Retaining Wall Method Based on the Numerical Analysis Results)

  • 최정표;진홍민;김채민;김성수;최용규
    • 한국지반공학회논문집
    • /
    • 제33권2호
    • /
    • pp.5-15
    • /
    • 2017
  • PHC-W 흙막이공법은 말뚝의 원형단면을 개량하여 전면부의 평면화로 지보재의 설치가 용이하며 중첩(over-lap)시공이 가능하여 차수와 수직도가 우수하고 H형강을 사용하지 않아 경제적인 흙막이공법이다. 지층조건이 다른 3가지 사례를 이용하여 수치해석을 실시하였다. N치가 30미만의 지층에서는 PHC-W흙막이 A 형, B 형 각각에서 10.5m, 11.0m정도 굴착 가능한 것으로 나타났다. N치가 30이상의 비교적 양호한 지반에서는 PHC-W흙막이 A 형, B 형 각각에서 17.0m, 19.5m정도 굴착 가능한 것으로 나타났다. 지층조건이 양호할수록 굴착 가능 깊이가 커지는 것으로 나타났고 수평변위는 작아지는 것으로 나타났으며, 휨강도 안전율은 낮아지는 것으로 나타났고 전단력 안전율도 낮아지는 것으로 나타났다.

Spectrofluorometric Properties of N-Terminal Domain of Lumazine Protein from Photobacterium leiognathi

  • Kang, Kyoung-Suk;Kim, So-Young;Lee, Jung-Hwan;Nam, Ki-Seok;Lee, Eui Ho;Lee, Chan Yong
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권6호
    • /
    • pp.1673-1678
    • /
    • 2013
  • Lumazine protein is a member of the riboflavin synthase superfamily and the intense fluorescence is caused by non-covalently bound to 6,7-dimethyl 8-ribityllumazine. To figure out the binding modes and the structure of the N-terminal domain of lumazine protein, the wild type of protein extending to amino acid 118 (N-LumP 118 Wt) and mutants of N-LumP 118 V41W, S48W, T50W, D64W, and A66W from Photobacterium leiognathi were purified. The biochemical properties of the wild type and mutants of N-LumP 118 proteins were analyzed by absorbance and fluorescence spectroscope. The peak of absorbance and fluorescence of lumazine ligand were shifted to longer wavelength on binding to N-LumPs. The observed absorbance value at 410 nm of lumazine bound to N-LumP 118 proteins indicate that one mole of N-LumP 118 proteins bind to one mole of ligand of lumazine. Fluorescence analysis show that the maximum peak of fluorescence of N-LumP S48W was shifted to the longest wavelength by binding with 6,7-dimethyl 8-ribityllumazine and was shown to the greatest quench effect by acrylamide among all tryptophan mutants.

고효율 OLED 제작을 위한 플라즈마 조건 변화에 따른 ITO 특성 분석 (Characteristic Analysis of ITO by Variation of Plasma Condition to Fabricate OLED of High Efficiency)

  • 김중연;강명구
    • 전자공학회논문지 IE
    • /
    • 제44권2호
    • /
    • pp.8-13
    • /
    • 2007
  • 본 논문에서는 고효율의 유기발광소자 제작을 위해 플라즈마 조건 변화에 따른 ITO 특성을 분석하였다. $N_2$$O_2$ 가스로 RF 플라즈마 출력은 100 W, 200 W, 400 W로 가스압력은 12 mTorr, 120 mTorr로 변화실험을 하였다. $N_2$ 가스를 이용하여 플라즈마 처리한 ITO의 일함수는 $4.88{\sim}5.07$ eV의 값을 나타내었고 $O_2$ 가스를 이용하여 플라즈마 처리한 ITO는 $4.85{\sim}4.97$ eV의 일함수를 나타내었다. $N_2$ 가스에서 가스의 압력이 120 mTorr이면서 플라스마 출력이 200 W의 조건에서 RF 플라즈마 처리한 ITO의 특성이 우수하였다. ITO 표면의 rms roughness는 AFM 이미지에서 계산하여 나타낸 수치로써 $N_2$$O_2$ 가스가 주입된 플라즈마로 처리된 ITO는 플라즈마 출력이 200 W일 때 각각 $25.2\;{\AA}$$30.5\;{\AA}$로 나타났으며 플라즈마 처리되지 않은 ITO는 $44.5\;{\AA}$이었다. ITO 박막의 투과율 측정에서는 $N_2$$O_2$ 가스의 압력을 변화시켜도 ITO의 투과율은 거의 변동이 없었다.

금강 수계 퇴적물 중 PCDD/Fs 및 Co-PCBs의 농도 분포와 발생원 해석 (Distribution and Source Identification of PCDD/Fs and Co-PCBs in Sediments from the Geum River)

  • 박종은;김종국;안성윤
    • 대한환경공학회지
    • /
    • 제33권12호
    • /
    • pp.900-906
    • /
    • 2011
  • 본 연구에서는 금강 수계 퇴적물 중 PCDD/Fs 및 Co-PCBs의 농도 분포를 파악하고 발생원을 추정하기 위해 17개 지점에서 총 52개의 샘플을 채취하여 분석하였다. 금강 수계 퇴적물 표층에서 검출된 PCDD/Fs 및 Co-PCBs의 농도 수준은 각각 불검출~193.47(평균 84.52) pg/g-d.w.와 0.34~359.19(평균 114.65) pg/g-d.w.를 나타내었으며, TEQ 값은 각각 불검출~5.12(평균 0.88)pg I-TEQ/g-d.w와 불검출~0.58(평균 0.09) $WHO_{2005}$-TEQ pg/g-d.w.을 나타내었다. 유역별로는 하수종말처리장, 분뇨처리장, 매립장 등이 위치한 상류 지역에서 가장 높은 농도를 보였으며, 하천 하류 방향으로 갈수록 감소하는 경향을 보였다. 다이옥신이 검출된 지점에서는 고염소 화합물이 특징적으로 높은 패턴을 나타내었으며, Co-PCBs는 모든 퇴적물 시료의 이성체 패턴이 PCBs 제품의 패턴과 유사한 경향을 보였다. Co-PCBs의 발생원 해석을 위해 통계 분석을 수행한 결과 상업적 PCBs 제품에 의한 영향이 큰 것으로 나타났다.

PMW-PNN-PZT계 세라믹스의 유전및 압전특성 (Dielectric and Piezoelectric Properties of PMW-PNN-PZT System Ceramics)

  • 윤광희;류주현;윤현상;박창엽
    • 한국전기전자재료학회논문지
    • /
    • 제13권3호
    • /
    • pp.214-219
    • /
    • 2000
  • In this paper the structural dielectric and piezoelectric properties of Pb[(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$$O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

  • PDF

High Dose $^{60}Co\;{\gamma}$-Ray Irradiation of W/GaN Schottky Diodes

  • Kim, Jihyun;Ren, F.;Schoenfeld, D.;Pearton, S.J.;Baca, A.G.;Briggs, R.D.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제4권2호
    • /
    • pp.124-127
    • /
    • 2004
  • W/n-GaN Schottky diodes were irradiated with $^{60}Co\;{\gamma}-rays$ to doses up to 315Mrad. The barrier height obtained from current-voltage (I-V) measurements showed minimal change from its estimated initial value of ${\sim}0.4eV$ over this dose range, though both forward and reverse I-V characteristics show evidence of defect center introduction at doses as low as 150 Mrad. Post irradiation annealing at $500^{\circ}C$ increased the reverse leakage current, suggesting migration and complexing of defects. The W/GaN interface is stable to high dose of ${\gamma}-rays$, but Au/Ti overlayers employed for reducing contact sheet resistance suffer from adhesion problems at the highest doses.

화재감지 센서 작동시간 및 열방출률에 대한 실험연구 (A Experimental Study on the Heat Release Rate to activate Fire Detection Sensor)

  • 홍성호
    • 전기학회논문지
    • /
    • 제61권9호
    • /
    • pp.1358-1361
    • /
    • 2012
  • This paper presents a study on the analysis for activation time and threshold value of heat detection sensor using HRR(Heat Release Rate). And it is represented to quantity of heat to activate heat detection sensor. The experiment is conducted to measure activation time and HRR of fire detection sensor burning alcohol and n-heptane. In order to burn the alcohol and n-heptane using $43.5cm(L){\times}43.5cm(W){\times}5cm(D)$ and $33cm(L){\times}33cm(L){\times}5cm(D)$ steel pan and the quantity of alcohol and n-heptane are 2.5 L and 650 g, respectively. The results show that peak HRR are in case of alcohol 66.13 kW and in case of n-heptane 151.64 kW, respectively. Total heat releases of heat detection sensor are in case of alcohol approximately 20.7 MJ and in case of n-heptane approximately 18 MJ, respectively.