• Title/Summary/Keyword: mutation breeding

Search Result 153, Processing Time 0.032 seconds

Germination and Seedling Growth in Response to Ionizing Radiation in Creeping Bentgrass (Agrostis palustris Huds.)

  • Lee, Yong Jin;Hong, Min Jeong;Kim, Dae Yeon;Lee, Tong Geon;Kim, Dong Sub;Kim, Jin Baek;Lee, Byung Cheol;Han, Young Hwan;Seo, Yong Weon
    • Korean Journal of Breeding Science
    • /
    • v.40 no.1
    • /
    • pp.15-21
    • /
    • 2008
  • It was previously pointed out that mutation is the ultimate source of variation. Adequate variation is needed for plant breeding if there is a limitation in natural genetic resources. When the ionizing radiation has been known to cause chromosomal and genomic alternations, it is widely used for inducing mutagenesis. The electron beam as an ionizing radiation is the principal physical mutagens that induces mutation and effectively used in plant breeding. Since dose-response relationships of electron beam in plant species are rarely known, we investigated the seed germination rate and early seedling growth of irradiated seeds of creeping bentgrass (Agrostis palustris Huds., cv Penn-A1) with various electron beam irradiating conditions (1, 1.3, 2 MeV at both 0.03 mA and 0.06 mA with dose of 100 Gy (Gray) and 0.03, 1, 1.3, 2 MeV at 0.03 mA with dose of 200 Gy, respectively) using electron accelerator at Korea Atomic Energy Research Institute. The growth parameters in terms of shoot length, primary root length, and secondary root length showed similar response between 0.06 / 1 (mA / MeV) at 100 Gy and 0.03 / 0.3 (mA / MeV) at 200 Gy. Bentgrass seed germination was mainly affected by the intensity of irradiated dose (Gray). Germination rate was lowered as the irradiated dose increased. On the other hand, early seedling growth was mainly governed not by the dose of radiation but by voltage.

Genetic and Environmental Deterrents to Breeding for Disease Resistance in Dairy Cattle

  • Lin, C.Y.;Aggrey, S.E.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.16 no.9
    • /
    • pp.1247-1253
    • /
    • 2003
  • Selection for increased milk production in dairy cows has often resulted in a higher incidence of disease and thus incurred a greater health costs. Considerable interests have been shown in breeding dairy cattle for disease resistance in recent years. This paper discusses the limitations of breeding dairy cattle for genetic resistance in six parts: 1) complexity of disease resistance, 2) difficulty in estimating genetic parameters for planning breeding programs against disease, 3) undesirable relationship between production traits and disease, 4) disease as affected by recessive genes, 5) new mutation of the pathogens, and 6) variable environmental factors. The hidden problems of estimating genetic and phenotypic parameters involving disease incidence were examined in terms of categorical nature, non-independence, heterogeneity of error variance, non-randomness, and automatic relationship between disease and production traits. In light of these limitations, the prospect for increasing genetic resistance by conventional breeding methods would not be so bright as we like. Since the phenomenon of disease is the result of a joint interaction among host genotype, pathogen genotype and environment, it becomes essential to adopt an integrated approach of increasing genetic resistance of the host animals, manipulating the pathogen genotypes, developing effective vaccines and drugs, and improving the environmental conditions. The advances in DNA-based technology show considerable promise in directly manipulating host and pathogen genomes for genetic resistance and producing vaccines and drugs for prevention and medication to promote the wellbeing of the animals.

Association of the A-G Polymorphism in Porcine Adiponectin Gene with Fat Deposition and Carcass Traits

  • Dai, L.H.;Xiong, Y.Z.;Deng, C.Y.;Jiang, S.W.;Zuo, B.;Zheng, R.;Li, F.E.;Lei, M.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.6
    • /
    • pp.779-783
    • /
    • 2006
  • The adiponectin gene is known to be involved in the regulation of energy homeostasis involving food intake, carbohydrate and lipid metabolism. Human adiponectin gene polymorphisms have been recently reported to be associated with obesity, insulin sensitivity and the risk of type 2 diabetes. The present study was carried out to investigate the porcine adiponectin gene as a candidate gene for fat deposition and carcass traits. A mutation of A178G of the porcine adiponectin gene that resulted in substitution of the amino acid Isoleucine to Valine was identified. AcyI PCR-RFLP was used to detect the polymorphism of the genotypes in five different pig populations (Large White, Landrace, Duroc, Chinese breeds Meishan and Qingping). The A allele frequency was significantly higher among subjects from Chinsese lard type breeds, while the G allele was the only one present in those from Western lean type breeds. To determine if there was an association of the polymorphism with phenotypic variation, the mutation was tested in 267 pigs of the "Large $White{\times}Meishan$" F2 resource population. The results of association analyses showed significant associations of the genotypes with fat deposition and carcass traits. Allele G was significantly associated with increase in loin eye height, loin eye area and lean meat percentage and bone percentage, and decrease in fat mean percentage, ratio of lean to fat, shoulder fat thickness, 6-7 rib fat thickness, thorax-waist fat thickness and buttock fat thickness. The substitution of A178G (Ile60Val) happened to be located at amino acid 60 in the collagenous domain of porcine adiponectin which might affect the association into higher-order structures, and accordingly affect the posttranslational modifications and optimal biological activity of the multimeric forms. The identified functional polymorphism provides new evidence of adiponectin as an important candidate gene affecting fat deposition and carcass traits in pigs.

Practice of industrial strain improvement (제 1차 한.중 생명공학 심포지움)

  • Lei, Zhao-zu
    • The Microorganisms and Industry
    • /
    • v.19 no.2
    • /
    • pp.34-41
    • /
    • 1993
  • Industrial strain improvement is concerned with developing or modifying microorganisms used in production of commercially important fermentation products. The aim is to reduce the production cost by improving productivity of a strain and manipulating specific characteristics such as the ability to utilize cheaper raw materials or resist bacteriophages. The traditional empirical approach to strain improvement is mutation combined with selection and breeding techniques. It is still used by us to improve the productivity of organisms in amino acids, organic acids and enzymes production. The breeding of high L-lysine-producing strain Au112 is one of the outstanding examples of this approach. It is a homoserine auxotroph with AEC, TA double metabolic analogue resistant markers. The yield reaches 100 g/l. Besides, the citric acid-producing organism Aspergillus niger, Co827, its productivity reaches the advanced level in the world, is also the result of a series mutations especially with $^60Co{\gamma}$-radiation. The thermostable .alpha.-amylase producing strain A 4041 is the third example. By combining physical and chemical mutations, the strain A 4041 becomes an asporogenous, catabolite derepressed mutant with rifamycin resistant and methionine, arginine auxotroph markers. The .alpha.-amylase activity reaches 200 units/ml. The fourth successful example of mutation in strain improvement is the glucoamylase-producing strain Aspergillus niger SP56, its enzyme activity is 20,000 units/ml, 4 times of that of the parental strain UV-11. Recently, recombinant DNA approach provides a worthwhile alternative strategy to industrial strain improvement. This technique had been used by us to increase the thermostable .alpha.-amylase production and on some genetic researches.

  • PDF

국내기탁기관의 현황 2

  • 오두환
    • The Microorganisms and Industry
    • /
    • v.15 no.1
    • /
    • pp.38-42
    • /
    • 1989
  • Industrial strain Improvement is concerned with developing or modifying microorga-nisms used In production of commercially important fermentation products. The aim is to reduce the production cost by improving productivity of a strain and manipulating specific cilarafteristic such as the ability to utilize cheaper raw materials or resist bacteriophages. The traditional empiri-cal approach to strain improvement is mutation combined with selection and breeding techniques. It is still used by us to improve the productivity of organisms in amino acids. organic acids andenzymes production. The breeding of high L-lysine-producing strain Au112 is one of the outstanding examples of this approach. It is it homoserine auxotroph with AEC, TA double metabolicanalogue resistant markers. The yield reaches 100g/1. Resides, the citric acid-producing organism Aspergillus nuger, Co827, its productivity reches the advanced level in the world, is also the result of a series mutations expecially with Co Y-radiation. The thermostable a-amylaseroducing strain A 4041 is the third example. By combining physical and chemical multations. the strain ,A 4041becomes an asporogenous, catabolite derepressed mutant with rifamycin resistant and methionine, arginine auxotroph markers. The a-amylase activity reaches 200 units/ml. The fourth successful example of mutation in strain improvement is the glucoamylase-producing strain Aspergillus nigerSP56 its enzyme activity is 20,000 units/ml, 4 times of that of the parental strain UV_11. Recently recombinant DNA approach Provides a worth while alternative strategy to Industrial strain improve-ment. This technique had been used by us to increase the thermostable a-amylase production and on some genetic researches.

  • PDF

Genomic Variations of Rice Regenerants from Tissue Culture Revealed by Whole Genome Re-Sequencing

  • Qin, Yang;Shin, Kong-Sik;Woo, Hee-Jong;Lim, Myung-Ho
    • Plant Breeding and Biotechnology
    • /
    • v.6 no.4
    • /
    • pp.426-433
    • /
    • 2018
  • Plant tissue culture is a technique that has invariably been used for various purposes such as obtaining transgenic plants for crop improvement or functional analysis of genes. However, this process can be associated with a variety of genetic and epigenetic instabilities in regenerated plants, termed as somaclonal variation. In this study, we investigated mutation spectrum, chromosomal distributions of nucleotide substitution types of single-nucleotide polymorphisms (SNPs) and insertions/deletions (InDels) by whole genome re-sequencing between Dongjin and Nipponbare along with regenerated plants of Dongjin from different induction periods. Results indicated that molecular spectrum of mutations in regenerated rice against Dongjin genome ranged from $9.14{\times}10^{-5}$ to $1.37{\times}10^{-4}$ during one- to three-month callus inductions, while natural mutation rate between Dongjin and Nipponbare genomes was $6.97{\times}10^{-4}$. Non-random chromosome distribution of SNP and InDel was observed in both regenerants and Dongjin genomes, with the highest densities on chromosome 11. The transition to transversion ratio was 2.25 in common SNPs of regenerants against Dongjin genome with the highest C/T transition frequency, which was similar to that of Dongjin against Nipponbare genome.

A Gene-based dCAPS Marker for Selecting old-gold-crimson (ogc) Fruit Color Mutation in Tomato (토마토 과색 돌연변이 유전자(old-gold-crimson) 선발을 위한 dCAPS 분자표지 개발)

  • Park, Young-Hoon;Lee, Yong-Jae;Kang, Jum-Soon;Choi, Young-Whan;Son, Beung-Gu
    • Journal of Life Science
    • /
    • v.19 no.1
    • /
    • pp.152-155
    • /
    • 2009
  • The old-gold-crimson ($og^c$) fruit color mutation produces deep red tomato fruit with high lycopene content. age is a null mutation allele of lycopene-${\beta}$-cyclase (Crt-b) gene (B locus) that converts lycopene to ${\beta}$-carotene in the cartenoid biosynthesis pathway in tomato. Breeding of high lycopene tomato cultivars can be accelerated by marker-assisted selection (MAS) for introgression of $og^c$ allele by using a gene-based DNA marker. In order to develop a marker, single nucleotide deletion of adenine(A) with. in a poly-A repeat that has been known to be responsible for frame-shift mutation of $og^c$ was confirmed by resequencing mutant allele and wild-type allele at B locus of several tomato lines. For allele discrimination and detection of $og^c$, derived CAPS (dCAPS) approach was used by designing a primer that artificially introduced restriction enzyme recognition site of Hin fI in PCR products from $og^c$ allele. This dCAPS marker is co-dominant gene-based PCR marker that can be efficiently used for MAS breeding program aiming the development of high lycopene tomato.

Association between Polymorphisms of Lipoprotein Lipase Gene and Chicken Fat Deposition

  • Liu, Rui;Wang, Yachun;Sun, Dongxiao;Yu, Ying;Zhang, Yuan
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.10
    • /
    • pp.1409-1414
    • /
    • 2006
  • The objective of this study was to screen single nucleotide polymorphisms (SNPs) of the chicken lipoprotein lipase gene (LPL), using 545 F1 hybrids developed from $4{\times}4$ diallel crossing of four chicken breeds, and to analyze the associations between polymorphisms of the LPL and chicken fat deposition traits. PCR-SSCP was used to detect SNPs in LPL. Fifteen sets of primers were designed to amplify DNA fragments covering the 5'flanking and coding regions of LPL. It showed that there existed 5 polymorphic loci in the 5'flanking region and coding region, respectively. Association analysis was carried out between 10 polymorphic loci and intermuscular fat width, abdominal fat weight, and thickness of subcutaneous fat using ANCOVA, respectively. The results indicated that, in the 5'flanking region, the loci d and e significantly affected thickness of subcutaneous fat (p<0.05), abdominal fat weight (p<0.01) and subcutaneous fat (p<0.05), while in the coding region, synonymous mutation in exon 8 was significantly associated with intermuscular fat width (p<0.05), however, the non-synonymous mutations in exon 7 and exon 9 did not show statistically significant effects on fat deposition traits in this study.

Double Mutations in eIF4E and eIFiso4E Confer Recessive Resistance to Chilli Veinal Mottle Virus in Pepper

  • Hwang, JeeNa;Li, Jinjie;Liu, Wing-Yee;An, Song-Ji;Cho, Hwajin;Her, Nam Han;Yeam, Inhwa;Kim, Dosun;Kang, Byoung-Cheorl
    • Molecules and Cells
    • /
    • v.27 no.3
    • /
    • pp.329-336
    • /
    • 2009
  • To evaluate the involvement of translation initiation factors eIF4E and eIFiso4E in Chilli veinal mottle virus (ChiVMV) infection in pepper, we conducted a genetic analysis using a segregating population derived from a cross between Capsicum annuum 'Dempsey' containing an elF4E mutation ($pvr1^2$) and C. annuum 'Perennial' containing an elFiso4E mutation (pvr6). C. annuum 'Dempsey' was susceptible and C. annuum 'Perennial' was resistant to ChiVMV. All $F_1$ plants showed resistance, and $F_2$ individuals segregated in a resistant-susceptible ratio of 166:21, indicating that many resistance loci were involved. Seventy-five $F_2$ and 329 $F_3$ plants of 17 families were genotyped with $pvr1^2$ and pvr6 allele-specific markers, and the genotype data were compared with observed resistance to viral infection. All plants containing homozygous genotypes of both $pvr1^2$ and pvr6 were resistant to ChiVMV, demonstrating that simultaneous mutations in elF4E and eIFiso4E confer resistance to ChiVMV in pepper. Genotype analysis of $F_2$ plants revealed that all plants containing homozygous genotypes of both $pvr1^2$ and pvr6 showed resistance to ChiVMV. In protein-protein interaction experiments, ChiVMV viral genome-linked protein (VPg) interacted with both eIF4E and eIFiso4E. Silencing of elF4E and eIFiso4E in the VIGS experiment showed reduction in ChiVMV accumulation. These results demonstrated that ChiVMV can use both eIF4E and eIFiso4E for replication, making simultaneous mutations in eIF4E and eIFiso4E necessary to prevent ChiVMV infection in pepper.