• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.56-59
• /
• 2011

The process conditions for high efficiency industrial crystalline Si solar cells with selective emitter were optimized. In the screen printed solar cells, the sheet resistance must be 50-60V/sq. because of metal contact resistance. But the low sheet resistance causes the increase of the recombination and blue response at the short wavelength. Therefore, the screen printed solar cells with homogeneous emitter have limitations of efficiency, and this means that the selective emitter must be used to improve cell efficiency. This work demonstrates the feasibility of a commercially available selective emitter process, based on screen printing and conventional diffusion process. Now, we improved cell efficiency from 18.29% to18.45% by transition of heavy emitter pattern and shallow emitter doping condition.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.47-61
• /
• 1996

An ATM switch must deal with various kinds of input sources having different traffic characteristics and it must guarantee very small value of cel loss probability, about 10$^{8}$ -10$^{12}$ , to deal with loss-sensitive traffics. In order to estimate such a rate event probability with simulation procedure, a variance reduction technique is essential for obtaining an appropriate level of precision with reduced cost. In this paper, we propose a hybrid simulation technique to achieve reduction of variance of cell loss probability estimator, where hybrid means the combination of analytical method and simulation procedure. A discrete time queueing model with multiple input sources and a finite shared buffer is considered, where the arrival process at an input source and a finite shared buffer is considered, where the arrival process at an input source is governed by an Interrupted Bernoulli Process and the service rate is constant. We deal with heterogeneous input sources as well as homogeneous case. The performance of the proposed hybrid simulation estimator is compared with those of the raw simulation estimator and the importance sampling estimator in terms of variance reduction ratios.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.809-812
• /
• 2005

Battery is an energetic collector of solar cell system. Battery which is used in the system must have many qualities in the followings. The battery must be "Deep Cycle Battery" type. In addition, the battery is Cleary indicated the percentage of DOD. The indication of DOD is used for calculation other valve used in solar cell system. Currently, the percentage of DOD of battery is fixed by battery manufacture. If users would like to calculate is introduced % DOD, the users have to check the battery at least 12 months. This article is introduced battery deep of discharge meter by using theory of lead acid battery under deep cycle type and including the theory of DC. Current and internal resistance of battery. The data used for analyzing are collected according to the theories. The data will be calculated by monitor unit and controller systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.209-221
• /
• 2009

The successful mass media drama, 'The 1st Shop of Coffee Prince', has received lots of supports from the audience by showing them a vivid life and also enabling them to dream a real fantasy. One among the most powerful strategies that made this drama stay successful is the marketing value of the drama space fully maximized when doing the production. This study, introducing a unique representation of 2-D cell matrix with x-y plots of drama space set along the time stream following the scenario, first proposes a quantitative way of uncovering the hidden relation between drama space and scenario using nonlinear matrix filtering method and, secondly, suggests possible service designs mainly constrained by economical standpoints of the stakeholder in producing the drama. The methodology may invoke a plausible contradiction with art instincts that have hardly been supposed to be affected by financial debate, which, nevertheless, must sometimes be allowed under the circumstance of pursuing optimality in programming and producing the drama that must survive in the world of competitive market of service business.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.209-214
• /
• 1997

Odontogenic cysts are relatively common pathologic lesions found in the oral and perioral structures, but the case of squamous cell carcinoma arising from those cysts are very uncommon. After first reported of that case in 1889 by Herman, Schwimmer collected 56 cases of previously reported squamous cell carcinoma arising in residual odontogenic cyst during about past one century. More than 60% of cases of carcinoma developing in odontogenic cysts arising in inflammatory periapical or residual cyst, and these tumors are usually well-differentiated with relatively good prognosis, and often are diagnosed as benign lesion in radiographic or clinical examination, therefore definitive diagnosis must be made by histologic examintation. We report a case and review the literatures, in our case, 78-year old woman were clinically and radiographically diagnosed as residual odontogenic cyst. But in histologic examination after enucleation of lesion, mass of squamous cell carinoma were observed, but in other area, typical cyst wall and lining epithelium were observed. And in some area, carcinoma in situ and invading squamous cell carcinoma into the lining epithelium were also observed.

• Korean Journal of Veterinary Research
• /
• v.55 no.3
• /
• pp.155-161
• /
• 2015

The number of wild animal species is gradually decreasing due to poaching, hunting and habitat loss. While several endangered animal species have been successfully preserved at the zoo, assisted reproductive technology (ART) must be applied to restore wild animals. In the case of critically endangered animals, somatic cell cloning is considered the most appropriate method of ART. Somatic cell cloning can be beneficial for the reproduction of endangered species with limited female populations. However, gene and cell banks, and understanding of reproductive physiology and optimization of ART for wild animals are urgently required for further activation of artificial reproduction of endangered species, which enlarges its application and maintains biodiversity. Care should also be taken to consider ethical and legal issues associated with somatic cell cloning for conservation of endangered animals.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.331-334
• /
• 2009

An air-independent propulsion (AIP) system based on fuel cell technologies was developed for space and underwater applications in the present study. Hydrogen peroxide was selected as an oxidizer for space and underwater power applications where air independence is a must. Catalytic decomposition of hydrogen peroxide was used to generate oxygen and water. The pure oxygen was provided to a fuel cell and the water was stored separately. Sodium borohydride in the solid state was used as a hydrogen source in the present study. Pure hydrogen can be generated by a catalytic hydrolysis reaction. A fuel cell system was fabricated to validate the fuel cell based air-independent power system and was evaluated at the various conditions.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.2
• /
• pp.29-37
• /
• 2008

Air supply is required to the cathode of fuel cells for the provision of oxygen to produce electricity through chemical reaction with hydrogen in the cell, and supplied air should be free of impurities such as oil mist and tiny particles separated from sliding surfaces. Hence, air compressor for fuel cell air supply must be oil-less type and have no severe sliding surfaces inside. This paper introduces the concept of single-vane type rotary air compressor whose structure is particularly suitable for the fuel cell application: sliding action of the vane against the cylinder wall, which causes severe friction in the conventional vane rotary compressors, is made to be prevented by attaching the vane to the driving shaft with the compliant device between the vane and the rotor in this new design. For 2 kW fuel cell application, preliminary design has been carried out, and its performance has been estimated by using computer simulation program: for discharge pressure of 2 bar, the volumetric, adiabatic, and mechanical efficiencies are calculated to be 82.5%, 92.5%, and 96.3%, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.131-133
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cell (DSC) has been very economical and easy method to convert solar energy to electricity. Recently a novel tandem cell structure is proposed to improve photocurrent of DSC. To fabricated a tandem cell, the mesh structure of counter electrode is essential for the improvement in transmittance. In this study, we conducted the experiment to get the characteristic of DSC with mesh counter electrode. Under the standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 3.41% and the transmittance of 72% in the DSC with mesh counter electrode.