• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.46-55
• /
• 2006

The purpose of this study is a development of an automatic mosaicing for applying to large number of airborne multispectral images, which reduces manual operation by human. 2436 airborne multispectral images were acquired from DuncanTech MS4100 camera with three bands; green, red and near infrared. LIDAR(LIght Detection And Ranging) data and GPS/INS(global positioning system/inertial navigation system) data were collected with the multispectral images. First, the multispectral images were converted to image patterns by unsupervised classification. Their patterns were compared with those of adjacent images to derive relative spatial position between images. Relative spatial positions were derived for 80% of the whole images. Second, it accomplished an automatic mosaicing using GPS/INS data and unsupervised classification. Since the time of GPS/INS data did not synchronized the time of readout images, synchronized GPS/INS data with the time of readout image were selected in consecutive data by comparing unsupervised classified images. This method realized mosaicing automatically for 96% images and RMSE (root mean square error) for the spatial precision of mosaiced images was only 1.44 m by validation with LIDAR data.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.142-149
• /
• 2014

Purpose: A multispectral algorithm for detection and differentiation of defective (defects on apple skin) and normal Red Delicious apples was developed from analysis of a series of hyperspectral line-scan images. Methods: A fast line-scan hyperspectral imaging system mounted on a conventional apple sorting machine was used to capture hyperspectral images of apples moving approximately 4 apples per second on a conveyor belt. The detection algorithm included an apple segmentation method and a threshold function, and was developed using three wavebands at 676 nm, 714 nm and 779 nm. The algorithm was executed on line-by-line image analysis, simulating online real-time line-scan imaging inspection during fruit processing. Results: The rapid multispectral algorithm detected over 95% of defective apples and 91% of normal apples investigated. Conclusions: The multispectral defect detection algorithm can potentially be used in commercial apple processing lines.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.159-164
• /
• 2004

SAM(Spectral Angle Mapper) is the method using the similarly of the angle between pairs of signatures instead of the spectral distance(MDC, MLC etc.) for classification or clustering. In this paper, we applied unsupervised techniques(Unsupervised SAM and ISODATA) to the Hyperspectral Image(Hyperion) which has innumerable, narrow and contiguous spectral bands and Multispectral Image(ETM$\^$+/) for the clustering of signatures. The overall measured accuracies of the USAM and ISODATA of multispectral image were 76.52%, 53.91% and the USAM and ISODATA of hyperspectral image were 63.04%, 53.91%. From the results of our test, we report that the Unsupervised SAM is better classfication technique than ISODATA. Also we believe that the "Spectral Angle" can potentially be one of the most accurate classifier not only multispectral images but hyperspectral images.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.163-166
• /
• 2000

In this paper, we will present a lossy data compression method for coding multispectral images. The proposed method uses both spatial and spectra] correlation inherent in multispectral images. First, band 2 and band 6 are vector quantized. Secondly, band 4 is estimated with the quantized band 2 using the predictive coding. Errors of band 4 are encoded at a second stage based on the magnitude of the errors. Thirdly, remaining bands are calculated with the quantized band 2 and band 4. Errors of residual bands are wavelet transformed and then we apply the SPIHT coding on the transformed coefficients. We classify classes without extra information transmitting and then use linear predictor. And errors can be encoded by SPIHT coding at any target rate we are want. It is shown that this method has better performance than FPVQ. Average PSNR rises 0.645 dB at the same bit rate.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.314-319
• /
• 1998

In this paper, for efficient data classification in multispectral bands environment, a band feature extraction method using the Rough sets theroy is proposed. First, we make a look up table from training data, and analyze the properties of experimental multispectral image data, then select the efficient band usin indiscernibility relation of Rough sets theory from analysis results. Proposed method is applied to LAMDSAT TM data on 2, June, 1992. Among them, normal distributive data were experimented, mainly. From this, we show clustering trends that similar to traditional band selection results by wavelength properties, from this, we verify that can use the proposed method that centered on data properties to select the efficient bands, though data sensing environment change to hyperspectral band environments.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.792-797
• /
• 2002

In the following paper two algorithms, suitable for the analysis of panchromatic data as provided by KOMPSAT-1 will be presented. One is a texture analysis which will be used to create a settlement mask based on the variations of gray values. The other is a fusion algorithm which allows the combination of high resolution panchromatic data with medium resolution multispectral data. The procedure developed for this purpose uses the spatial information present in the high resolution image to spatially enhance the low resolution image, while keeping the distortion of the multispectral information to a minimum. This makes it possible to use the fusion results for standard multispecatral classification routines. The procedures presented here can be automated to large extent, making them suitable for a standard processing routine of satellite data.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.119-128
• /
• 1997

Nowadays, many satellites regularly produce digital multispectral images of the earth's surface. Multispectral images may be displayed as color pictures by selecting three components for assignment to the primary colors. It is desired to enhance these images to generate a display picture that are representativde of their features. in this paper, a false color image processing algorithm is proposed for the purpose of enchancement of the multispectral images based on the human perception. The mean of each primary component is transformed to equalo. Intensity and saturation are enhanced by modified piecewise linear contrast strectching and saturation enhancement method. The proposed method has been successfully applied the LANDSAT TM image and shows good enhancement.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.177.1-177
• /
• 2001

This paper describes the design of a NUC(Non-uniformity Correction) module in MSC(Multispectral Camera) which will be a payload on KOMPSAT. This module is required inside a system with data compression module like MSC to minimize the loss of imagery due to non-uniform characteristics between CCD pixels when the imagery is received and processed on a ground station. It comprises Hotlink input/output for imagery data, RS-422 interface with main controller in MSC, a number of SRAMS for storing imagery data and parameters, FPGA controllers which control the entire NUC module under the control of main controller, etc. It inputs 8-channel imagery pixel data which consist of 2-channel MS(Multispectral) band and ...

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2343-2346
• /
• 2003

The spatial resolution of multispectral images can be improved by merging them with higher resolution image data. A fundamental problem frequently occurred in existing fusion processes, is the distortion of spectral information. This paper presents a spatially adaptive image fusion algorithm which produces visually natural images and retains the quality of local spectral information as well. High frequency information of the high resolution image to be inserted to the resampled multispectral images is controlled by adaptive gains to incorporate the difference of local spectral characteristics between the high and the low resolution images into the fusion. Each gain is estimated to minimize the l$_2$-norm of the error between the original and the estimated pixel values defined in a spatially adaptive window of which the weight are proportional to the spectral correlation measurements of the corresponding regions. This method is applied to a set of co-registered Landsat7 ETM＋ panchromatic and multispectral image data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.101-101
• /
• 2000

MSC(Multispectral Camera), which will be a unique payload on KOMPSAT-II, is designed to collect panchromatic and multi-spectral imagery with a ground sample distance of 1m and a swath width of 15km at 685km altitude in sun-synchronous orbit. The instrument is designed to have an orbit operation duty cycle of 20% over the mission life time of 3 years. MSC electronics consists of three main subsystems; PMU(Payload Management Unit), CEU(Camera Electronics Unit) and PDTS(Payload Data Transmission Subsystem). PMU performs all the interface between spacecraft and MSC, and manages all the other subsystems by sending commands to them and receiving telemetry from them with software protocol through RS-422 interface. CEU controls FPA(Focal Plane Assembly) which contains TDI(Timc Delay Integration) CCD(Charge Coupled Device) and its clock drivers. PMU provides a Master Clock to synchronize panchromatic and multispectral camera. PDTS performs compression, storage and encryption of image data and transmits them to the ground station through x-band.