• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.242-247
• /
• 1990

By self-homodyne method we measured the relative phase fluctuation of a light wave. Balanced detection system can eliminate local oscillator excess noise and multiport detection makes it possible ot measure the phase change of the signal beam. Deriving the SB(Signal Beam) and the LO(Local Oscillator) from the same laser source, we find the SB maintain constant phase relative to that of the LO. We have introduced a phase fluctuation in the SB by modulating the beam path of the SB. The measured phase fluctuation agreed well with the predicted one, thereby we confirmed the reliability of our system.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.258-265
• /
• 2015

A de-embedding method for multiport networks, especially for coupled odd interconnection lines, is presented in this paper. This method does not require a conversion from S-parameters to T-parameters, which is widely used in the de-embedding technique of multiport networks based on cascaded simple two-port relations, whereas here, we apply an operation to the S-matrix to generate all the uncoupled and coupled coefficients. The derivation of the method is based on the relations of incident and reflected waves between the input of the entire network and the input of the intrinsic device under test (DUT). The characteristics of the intrinsic DUT are eventually achieved and expressed as a function of the S-parameters of the whole network, which are easily obtained. The derived coefficients constitute ABCD-parameters for a convenient implementation of the method into cascaded multiport networks. A validation was performed based on a spice-like circuit simulator, and this verified the proposed method for both uncoupled and coupled cases.

• 한국수자원학회논문집
• /
• 제32권2호
• /
• pp.153-162
• /
• 1999

본 연구에서는 정지수체에서 다공확산관을 통해 방류된 연직다중의 혼합 및 희석 특성에 대해 규명하였다. 3차원 실험수조에서 실험을 통해 밝혀진 결과는 다음과 같다. 우선 다공확산관의 병합과정을 살펴보면 흐름의 안정조건에 따라 병합거리가 다소 차이가 있기는 하지만 {{{{ { z}_{ } }}}}/{{{{ {l}_{ } }}}}가 대략 3인 지점부터 병합이 시작되어 그 이후에는 평면부력？의 거동에 서서히 가까워짐을 알 수 있다. 최소희석률에 대해 분석해 본 결과, 방류운동량이 지배적인 영역, 천이영역, 그리고 부력이 지배적인 부력류영역으로 나누어 희석률 특성을 표현할 수 있음을 알 수 있었다. 본 연구의 실험결과 다공확산관의 경우 부력류영역의 희석률 상수가 평면확산관에 비해 15% 더 높게 나왔다. 그 이유는 다공확산관의 경우 병합 이전에는 개별의 경계면에서 주변수의 포획이 발생하여 희석이 증대되기 때문이다.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.81-92
• /
• 1995

In this paper, we present a high-level synthesis system that generates area-efficient RT-level datapaths with multiport memories. The proposed scheduling algorithm assigns an operation to a specific control step such that maximal sharing of functional units can be achieved with minimal number of memory ports, while satisfying given constraints. We propose a measure of multiport memory cost, MAV (Multiple Access Variable) which is defined as a variable accessed at several control steps , and overall memory cost is reduced by equally distributing the MAVs throughout all the control steps. Experimental results show the effectiveness of the proposed algorithm. When compared with previous approaches for several benchmarks available from literature, the proposed algorithm generates the datapaths with less memory modules and interconnection structures by reflecting the memory cost in the scheduling process.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.117-124
• /
• 1994

In this pape, we propose a graph-theoretic approach for solving the allocation problem for the synthesis of datapaths based on multiport memories. An efficient algorithm is devised by using the weighted bipartite matching algorithm to assign variables to each port of memory modules. The proposed algorithm assigns program variables into a minimum number of multiport memory modules such that usage of memory elements and interconnection cost can be kept minimal. Experimental results show that the proposed algorithm generates the datapaths with fewer registers in memory modules and less interconnection cost for several benchmarks available from the literatures.

• Water Engineering Research
• /
• 제1권4호
• /
• pp.309-320
• /
• 2000

In this study, laboratory study of the behavior of wastewater discharged from the Boston ocean outfall was compared with the predictions of mathematical models. The dta sets cover broad ranges of discharge conditions and oceanic conditions, and are associated with a typical type of outfall discharges with multiport diffusers. The laboratory data sets were obtained in density stratified towing tanks. These data sets were used to evaluate four commonly used models: UM, UDKHDEN, RSB and CORMI$\times$2 for minimum dilution, the height to the top of the wastefield, and wastefield thickness. For minimum diluation and height to the top of the wastefield, UM and RSB predictions agree well with laboratory data. UDKHDEN overestimated the minimum dilution and height to the top of the wastefield while CORMI$\times$2 underestimated these values. All of the model predictions for the wastefield thickness were widely scattered. about the measured values. The hydraulic model study reproduced the major features observed in the laboratory. It also afforded considerable insight into the mechanics of mixing of multiport risers which could not have been obtained either from the laboratory test or the mathematical models.

• ETRI Journal
• /
• 제35권4호
• /
• pp.718-721
• /
• 2013

This letter proposes a novel calibration method for a multiport amplifier (MPA) to achieve optimum port-to-port isolation by correcting both the amplitude and phase of the calibration signals. The proposed architecture allows for the detection of the phase error and amplitude error in each RF signal path simultaneously and can enhance the calibrated resolution by controlling the analog phase shifters and attenuators. The designed $2{\times}2$ and $4{\times}4$ MPAs show isolation characteristics of 30 dB and 27 dB over a frequency range of 19.5 GHz to 22.5 GHz, respectively.

• 대한전기학회논문지
• /
• 제37권2호
• /
• pp.73-79
• /
• 1988

A fault current in Simultaneous faults is calulated, which satisfies the reliability for expansion of power scale. New algorithm for analyzing fault current is developed, which calculates exactly thevnin equivalent impedance from fault point by cecomposing increment bus admittance matrix ( Ybus), and fault current is calculated by applying multiport theory. The signeficant results are as follows ` 1) When system fault changes system configulation, equivalent impedance can be calculated simply with this new algorithm. 2) Mutual coupling of transmission line can be calculated efficiently. 3) Simultaneous fault current is analyzed by applying multiport theory, which can be applicable to large scale systems.

• 한국전자파학회지:전자파기술
• /
• 제6권3호
• /
• pp.80-90
• /
• 1995

마이크로스트립 단일선로, 직각벤드 및 결합선로의 산란행렬을 multipart r$\xi$twork model을 이용하여 1-18GHz 범위에서 계산했다. 단일선로는 평면형 도파관 모텔을 이용하여 해석했다. 직각벤드의 경우는 두개 의 사각형 부분으로 나누어져 각 부분은 단일선로와 같은 방법으로 해석되며, 각 부분의 임피던스 행렬은segmentation 방볍을 이용하여 연결된다. 결합선로 사이의 전자계 결합의 해석에는 Green 함수를 이용하는 기 존의 방법보다 계산시간이 적게 소요되는 새로운 방법이 이용되었다 상기의 세가지 구조에 대한 수치해석 결 과는 SuperCompact의 결과와 잘 일치하며, 이는 상기의 방법이 복잡한 단일 및 결합선로 불연속구조의 해석에 유용하게 사용될 수 있음을 보여준다

• 대한화장품학회지
• /
• 제17권1호
• /
• pp.1-17
• /
• 1991

Multiport-600 Solar SimulatorR is one of the most recent and convenient in-strument for evaluation of sun protection factor(SPF). In this study, we examined the practicability of the SPF determining system using Multiport -600 and the effects of several factors-light sources, seasons and experimental animals-on the minimal erythema dose(MED) and SPF. We also tested the UV sensitivity according to the sites of Korean people, And the ultraviolet radiation reaching the earth's surface In Seoul have been observed for one year. As a result of this study, the determinig system for SPF using Multiport-600 was proved to be a good system in accuracy and time-saving. The biological activity of fluorescence UV lamp of PUVA-800R was significantly higher than natural light or solar simulator with Xe arc lamp, and the determined MED became lower in inverse proportion to room temperature rise. Skin sensitivity by ultraviolet adiation was hights. in order \circled1 back \circled2 inns, upper arm \circled3 outer upper arm \circled4 foream. We also observed that UV radiation intensity was highest at noon in july and 1 sun burn unit(MED) was 28 minutes at that time.