• 제목/요약/키워드: multiplexer

검색결과 293건 처리시간 0.032초

ATM망에서 보장된 QoS을 위한 다중화기의 성능분석 (Performance Analysis of an Multiplexer for Guaranteed QoS in ATM Networks)

  • 음호식;이명호
    • 한국컴퓨터정보학회논문지
    • /
    • 제5권4호
    • /
    • pp.82-89
    • /
    • 2000
  • 본 논문은 실시간과 비실시간 버스트 트래픽을 가진 ATM 멀티플렉서의 셀 손실율을 분석하였다. 분석을 위하여 손실 우선순위 제어를 가진 ATM 멀티플렉서를 가정하였으며, 손실 우선순위 제어는 셀 헤더의 CLP필드를 이용하였다. 분석을 쉽게 하고 계산을 간략히 하기 위하여, ATM멀티플렉서의 다중화된 트래픽은 MMDP로 모델링하였다. ATM 멀티플렉서는 MMDP/MMDP/l/K 큐잉 모델로 시뮬레이션하였다. 분석결과, 손실우선순위 제어를 가진 ATM 멀티플렉서의 연결 수락은 낮은 우선순위를 갖는 셀손실율에 의하여 결정될 뿐만 아니라, 한계 버퍼의 크기에 의해서 결정된다는 결론을 얻었다. 따라서, ATM 멀티플렉서는 통계적 다중화 이득을 증가하기 위해서 손실 우선순위 제어를 이용하는 것이 유리함을 알 수 있었다.

  • PDF

이동통신 기지국용 삼중대역 멀티플렉서 (Triple-band Multiplexer for a Low Power Portable Base Station)

  • 서수덕;조학래;양두영
    • 한국산학기술학회논문지
    • /
    • 제15권12호
    • /
    • pp.7309-7316
    • /
    • 2014
  • 본 논문에서는 마이크로스트립 전송선로를 이용하여 소출력 이동통신 기지국용 삼중대역 멀티플렉서를 설계하고 제작하였다. 이 멀티플렉서는 셀룰러, WCDMA, 그리고 LTE를 포함하는 3개의 이동통신 주파수대역에서 이용 가능하도록 설계하였으며, 통과대역에서는 0.8 dB 삽입손실과 1.5 이하의 정재파비 그리고 차단대역에서는 15dB 이상의 대역저지 특성을 가지도록 설계하였다. 제작된 삼중대역 멀티플렉서 시료로부터 얻어진 신뢰성 테스트의 결과, 모든 시료의 제반 특성이 통과 대역 824~894 MHz, 1920~2170 MHz, 2500~2690 MHz에서 최대 삽입손실 0.71dB, 정재파비 1.38, 저지대역 감쇄 15 dB 이상을 보임으로써 우수한 성능과 설계 규격에서 정한 규정을 매우 잘 충족하고 있다.

다방위 입력이 가능한 다층구조 QCA 4-to-1 멀티플렉서 설계 (Multi-Layer QCA 4-to-1 Multiplexer Design with Multi-Directional Input)

  • 장우영;전준철
    • 문화기술의 융합
    • /
    • 제6권4호
    • /
    • pp.819-824
    • /
    • 2020
  • 본 논문에서는 차세대 디지털 회로 설계기술인 양자점 셀룰러 오토마타(QCA)를 이용하여 새로운 멀티플렉서를 제안한다. 디지털 회로 중 멀티플렉서는 입력 신호 중 하나를 선택하여 하나의 라인에 전달하는 회로이다. 이는 D-플립플롭, 레지스터, 그리고 RAM 셀 등 많은 회로에 쓰이므로 현재까지도 다양한 연구가 이루어지고 있다. 하지만 기존에 제안된 평면구조 멀티플렉서는 연결성을 고려하지 않아 큰 회로를 설계할 경우 비효율적으로 면적을 사용하게 된다. 기존에 다층구조로 제안된 멀티플렉서도 있으나 셀 간 상호작용을 고려하지 않아 필요면적이 여전히 높다. 이에 본 논문에서는 셀 간 상호작용을 이용하고, 다층구조를 이용하여 38% 면적축소, 17% 비용감소 그리고 연결성을 개선한 새로운 멀티플렉서를 제안한다.

Bit-dropping에 의한 Overload Control 방식을 채용한 Packet Voice Multiplexer의 성능 분석에 관한 연구 (Performance Analysis of a Packet Voice Multiplexer Using the Overload Control Strategy by Bit Dropping)

  • 우준석;은종관
    • 한국통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.110-122
    • /
    • 1993
  • 음성이 패킷망을 통해 전송될때 각각의 call들에 의해서 발생되는 패킷들은 statistical multiplexer에 의해 다중화 되는데 이때 overload control이 필요하다. Overload control 방식은 음성 traffic을 coding하는 방식과 밀접한 관계가 있으며 그동안 많은 연구가 진행되어 왔다. CCITT에서는 최근에 packetized voice protocol에 대한 권고안 초안인 G.764를 작성하였는데 여기에서 embedded coding을 사용하는 경우에 bit dropping 방식을 사용하면 매우 훌륭하게 overload control을 할 수 있다는 사실을 언급하였다. 이에 따라 본 논문에서는 음성을 embedded ADPCM으로 coding하여 CCITT권고안 G.764에 따라 전송하는 경우에, bit dropping 방식에 따른 overload control 방식을 사용하는 패킷 multiplexer의 성능을 분석하고자 한다. 성능 분석을 위해서는 먼저 multiplexer에 도착하는 중첩된 packet arrival process에서 패킷들의 interarrival time들 간에 존재하는 큰 correlation을 정확히 나타낼 수 있는 수학적인 model이 필요하다. 본 논문에서는 Poisson process나 birth-and-death process에 비해 이들 packet arrival process를 상대적으로 정확히 표현할 수 있는 Makov-modulated Poisson Process(MMPP)를 사용하여 모델링을 하였다.따라서 성능분석은 MMPP/G/1 queueing system에 대한 분석과 비슷하다. 다만 서비스 시간의 분포가 시스템의 상태에 따라 달라지는데 이러한 경우에 대해서는 기존의 논문에서 분석되지 않았다. 성능분석을 통하여 queue에서 서비스를 기다리는 패킷의 수에 대한 분포의 Z-transform을 구하고 이를 이용하여 임의의 시간에서의 queue length와 waiting time의 평균과 표준편차를 구하였다. 이를 통하여 bit dropping 방식에 의한 overload control이 음성의 질을 많이 저하시키지 않으면서도 overload control을 하지 않을 때에 비해 statistical multiplexer에서 훨씬 많은 수의 call을 수용할 수 있도록 하는 효과를 가진다는 사실을 확인 하였다. 또한 패킷이 queue에서 떠난 직후와 임의의 시간에서 구한 queue length와 waiting time의 평균과 표준편차가 매우 비슷하다는 사실을 알 수 있었다. 본 논문에서와 마찬가지로 임의의 시간에서의 분석은 매우 복잡한 경우가 대부분이므로 이러한 사실을 이용하면 매우 간단히 성능분석을 할 수 있을 것이다.

  • PDF

마이크로 프로세서를 이용한 디지털 보정회로 설계 (Design of Digital Correction Circuits Using Microprocessor)

  • 전호익;조현섭
    • 한국산학기술학회논문지
    • /
    • 제12권5호
    • /
    • pp.2291-2293
    • /
    • 2011
  • 본 논문에서는 유연성 있는 신호처리 방법으로 디지털 로직을 컴퓨터 논리연산 명령으로 구성하여 외부에서의 입력신호에 대응하는 논리연산의 결과를 입출력 채널을 통해 외부로 출력해 줄 수 있는 드라이브에 관한 연구이다. 이는 Decoder IC Multiplexer & Demulti Plexer, 기본 로직 IC 등의 가상구현 및 BIT출력이 가능한 디지털 신호원으로서의 기능이 가능하며 일반 산업체에서 유용하게 사용될 수 있으리라 사료된다.

동일한 MPEG 비디오원 입력에 대한 ATM 다중화기 셀손실률 근사분석 (An Approximate Analysis of Cell Loss Probability of ATM Multiplexer with Homogeneous MPEG Video Sources)

  • 이상천;홍정식
    • 대한산업공학회지
    • /
    • 제25권2호
    • /
    • pp.162-172
    • /
    • 1999
  • For VBR video traffic, Motion-Picture Experts Group(MPEG) coding algorithm was adopted as the standard coding algorithm by International Telecommunication Union(ITU). In this paper, we propose a traffic model of an MPEG coded video traffic in frame level and cell level, and develop an approximate model for evaluating performance of a ATM multiplexer with homogeneous MPEG video sources by considering burst-level variation of aggregated traffics. For homogeneous MPEG video traffics which are frame-synchronized, the performance of the ATM multiplexer is influenced by source correlation at the multiplexing time. When sources are highly correlated, we decompose the aggregated cell streams by the frame-type and model multiplexing process during a frame time as n*D/D/1/K queueing model and suggest an approximate method for obtaining CLP of the ATM multiplexer. In the case that sources are highly correlated, the solution has the meaning of the upper bounds of performance of the ATM multiplexer. For the verification of our model, we compare the solution of our model with simulation resets. As the number of sources increases. The CLP obtained from our model approaches to simulation results, and gives upper bounds of simulation results.

  • PDF

다중 모드 간섭을 이용한 7채널 파장 다중화기 설계 (Design of 7 Channel Multimode Interference Wavelength Multiplexer)

  • 김형태;이정언;김광웅;박정호
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
    • /
    • pp.305-308
    • /
    • 2000
  • In this paper, the 7${\times}$7 MMI Multiplexer is designed. The 1${\times}$7 Splitter and the 7${\times}$7 Coupler are designed and the phase-matched away length is determined. Then this result is confirmed by the simulation considering the intermode coupling. The MMI Multiplexer has The 14nm operating wavelength region, the 2nm wavelength spacing and the 1${\times}$3$\textrm{mm}^2$ size.

  • PDF

PERFORMANCE ANALYSIS OF A MULTIPLEXER WITH THE THRESHOLD BASED OVERLOAD CONTROL IN ATM NETWORKS

  • Park, Chul-Geun
    • Journal of applied mathematics & informatics
    • /
    • 제5권3호
    • /
    • pp.643-658
    • /
    • 1998
  • In this paper we analyze the performance of a statistical ATM multiplexer with bursty input traffic and two thresholds in the buffer by using queueing model. Two priority levels are considered for source traffic which is modeled by Markov Modulated Poisson Process to represent the bursty characteristics. Service time distributions of two priority sources are assumed to be same and deterministic for ATM environment. The partial buffer sharing scheme with one threshold may experience a sensitive state change around the threshold. But the proposed multiplexer with two thresholds avoids this hysterical phenominon to improve the system operation.

SiGe HBT를 이용한 10Gbps 2:1 시분할 멀티플렉서 설계 (10Gbps 2:1 Time-Division Multiplexer using SiGe HBT)

  • 이상흥;강진영;송민규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.287-290
    • /
    • 1999
  • In the transmitter of optical fiber transmission systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 2:1 (2-channels) time-division multiplexer using SiGe HBT with emitter size of 2$\times$8${\mu}{\textrm}{m}$$^2$. The operation speed is 10Gbps, the rise and fall times of 20-80% are 34ps and 35ps, respectively and the dissipation of power is 0.86W.

  • PDF

다양한 망구현이 가능한 파장분리형 광 애드/드롭 다중화기 (Wavelength Separation Add/drop Mu Multiplexer with the Various Network Topology)

  • 강현서;이동열
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
    • /
    • pp.209-212
    • /
    • 2001
  • We Propose a novel structure add/drop multiplexer based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating. In this structure, wavelength separation is achieved by adjusting the amount of the phase shift in the Mach-Zehnder interferometer. The proposed add/drop multiplexer drops a part of signal at a specific wavelength and transmit the remnant of the signal to the different node separated wavelength in WDM network.

  • PDF