• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.309-314
• /
• 2014

The structural layout of mechanical and civil structures is commonly obtained using conventional methods. For example, the shape of structures such as electric transmission towers and offshore substructures can be generated systematically. However, with rapid advancements in computer graphic technology, advanced structural analyses and optimum design technologies have been implemented. In this study, the structural shape of a jacket substructure for an offshore wind turbine is investigated using a topology optimization technique. The structure is subjected to multiple loads that are intended to simulate the loading conditions during actual operation. The optimization objective function is defined as one that ensures compliance of the structure under the given boundary conditions. Optimization is carried out with constraints on the natural frequency in addition to the volume constraint. The result of a first step model provides quick insights into the optimum layout for the second step structure. Subsequently, a 3D model in the form of the frustum of a quadrilateral pyramid is developed through topology optimization.

• The Plant Pathology Journal
• /
• v.20 no.4
• /
• pp.302-307
• /
• 2004

Three pairs of specific primers were developed for rapid and precise RT-PCR detection of three seed-transmissible viruses, namely Peanut clump virus (PCV, Pecluvirus), White clover mosaic virus (WCIMV, Potexvirus) and Carrot red leaf virus (CaRLV, Luteovirus). Each primer set was found in conserved region through multiple sequence alignment in the DNAMAN. Total nucleic acids extracted from PCV-, WCMV-, and CaRLV-infected seeds and healthy plants were used for RT-PCR detection using each virus-specific primer, Sizes of PCV, WCIMV, and CaRLV PCR products were 617bp (PCV-uni5 and PCV-uni3 primers), 561bp (WCMV-CP5 and WCMV-CP3 primers), and 626bp (CL1-UP and CL2-DN primers); which corresponded to the target sizes. Nucleotides sequences of each amplified cDNA were confirmed which belonged to the original virus. This study suggests that these virus-specific primer sets can specifically amplify viral sequences in infected seeds. Thus, they can be used for specific detection of three viruses (PCV, WCMV and CaRLV) from imported seed samples for plant quarantine service.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.1057-1062
• /
• 2004

The entomopathogenic bacterium Bacillus thuringiensis is the most widely used biopesticide. Insecticidal proteins, coded by genes located in plasmids, form typical parasporal, crystalline inclusions during sporulation. We isolated a Bacillus thuringiensis strain having insecticidal activity against larvae of the house fly (M. domestica) from the soils at a pig farm in Korea, and named it Bacillus thuringiensis SM. The culture filtrate from Bacillus thuringiensis SM showed strong lethality (83.3%) against M. domestica larvae. The parasporal crystal is enclosed within the spores' outermost envelope, as determined by transmission electron microscopy, and exhibited a bipyramidal form. The crystal proteins of strain SM consisted of five proteins with molecular weights of approximately ~130, ~80, ~68, ~42, and ~27 kDa on a 10% SDS-PAGE (major band, a size characteristic of Cry protein). Examination of antibiotic resistance revealed that the strain SM showed multiple resistant. The strain SM had at least three different plasmids with sizes of 6.6, 9.3, and 54 kb. Polymerase chain reactions (PCRs) revealed the presence of cry1, cry4A2, and cry11A1 genes in the strain SM. The cry1 gene profile of the strain SM appeared in the three respective products of 487 bp [cry1A(c)], 414 bp [cry1D], and 238 bp [cry1A(b)]. However, the strain SM has not shown the cry4A2 md cry11A1 genes. In in vivo toxicity assays, the strain SM showed high toxicity on fly larvae (M. domestic) [with $LC_{50}$ of 4.2 mg/ml, $LC_{90}$ of 8.2 mg/ml].

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2012

In crowded subway stations indoor air quality (IAQ) is a key factor for ensuring the safety and health of passengers. Since physical variables that describing IAQ such as the concentration of particulate, $CO_2$, VOCs and biological agents need to be closely monitored and controlled in multiple locations within subway stations and in remote sites, concept of web-based monitoring and control network using both wireless and wired media needs to be implemented. Connecting remote wireless sensor network and device (LonWorks) networks to the IP network based on the concept of VDN can provide a powerful, integrated, distributed monitoring and control performance. In this study, performance of wireless and wired network in VDN for monitoring and control of IAQ in subway stations is evaluated. Specifically, delay induced in wireless and wired networks, and data transmission rate are evaluated. A key parameter is identified in assuring safety and health of passengers in subway stations.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.749-756
• /
• 2010

The signal space diversity is one of the promising transmission techniques in next generation mobile TV service. However, DVB-T2 does not consider the multiple antennas (MIMO) so that the cyclic Q-delay method, a component interleaver in DVB-T2, causes a critical issue in detecting symbols at the receiver side by increasing the inter-symbol dependency. To solve this problem, the component-swapping technique is proposed, which limits the inter-symbol dependency in order to reduce detection complexity. In this paper, the achievable gain of a component-swapping technique combined with 16K LDPC code defined in DVB-T2 is evaluated by computer simulations. From the results, the gain is confirmed in terms of BER and receive complexity compared to legacy component interleaver methods.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.301-306
• /
• 2010

We propose the control channel access scheme for multi-interface multi-hop cognitive radio (CR) environment having a cluster structure. Due to the difficulty of obtaining common channels across the entire CR network, most multi-interface multi-hop CR networks put the control channel outside the CR bandwidth and dedicate one network interface to it in order to exchange the control information such as the activation of licensed users. However, this will be the waste of the network interface. Our focus is how to alternate between the control and the data channel without multichannel hidden node problem under the cluster structure where CR nodes connect with neighbors through multiple data channels. By using simulation, we evaluate the performance of the proposed scheme. The results show that the proposed scheme achieves higher network throughput than the dedicated scheme where one network interface card should dedicate to the control channel and cannot be used for data transmission.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.199-205
• /
• 2003

In this paper, CSMA/CA protocol is modified for aeronautical VHF communication through collision alleviation and the change of retransmission slot selection method in flag used transmission. When collision occurred in the contention period of CSMA/CA process, it is generally waiting for retransmission delay and it has the double size of CW(Contention Window). To solve this problem, this paper modifies the change procedure of original contention window size and reduces the state transition in collision among the whole of it. Also, in this paper we reduces the second collision probability through the station has to enter Backoff mode with increased contention window in the first collision. In the result of simulation, it is verified that it has good property in throughput and delay, So the proposed protocol is suitable for aeronautical VHF communication.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1483-1495
• /
• 2005

TCP/IP is the most commonly used protocol to communicate among servers, and is used in a wide range of applications. Unfortunately, Data transmission through TCP/IP places a very heavy burden on host CPUs. And it hardly makes another job to be processed. So, TOE(TCP/IP Offload Engine) is considered in many servers. But, most of TOE modules tends to not support binary compatibility for standard socket interfaces. So, it has problems that existing applications should be modified and recompiled to get advantage of TOE device. In this paper, to resolve upper problems, we suppose design and implementation of TOE module supporting binary compatibility for standard socket interfaces. Also, it can make a usage of multiple TOEs and NICs simultaneously.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.6
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.