• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1500-1510
• /
• 2007

최근 물류의 양이 증가함에 따라 빠르고 정확한 물류처리가 요구되어 지고 있다. 특히, 광역 물류 환경에서 게이트웨이로서의 역활을 수행하는 항만에서의 물류처리는 무엇보다 중요하다. 본 논문에서는 항만에서 보다 신속, 정확한 물류 처리를 수행하기 위한 스마트 태그 시스템을 설계 및 구현한다. 스마트 태그 시스템은 사물의 정보를 인식하는 능동형 RFID, 컨테이너의 보안을 담당하는 전자봉인 장치, 그리고 사물의 위치를 파악 및 추적하는 RTLS 시스템으로 이루어져 있다. 물류 환경에서 사용되어는 인식 기술은 이종 시스템들에서 판독되어지므로 표준과의 호환성은 중요하다. 본 논문에서는 표준과의 호환성을 유지하는 방법을 소개하고 검증을 수행하였으며, 스마트 태그의 수명, 인식률 및 인식시간 등과 같은 시스템의 성능을 분석한다.

• Journal of Obesity & Metabolic Syndrome
• /
• 제23권3호
• /
• pp.156-161
• /
• 2014

전 세계적으로 비만 인구는 증가 추세에 있고 그중 소아 청소년의 비만 유병률이 급속한 증가 추세에 있다. 소아 청소년 비만은 성인비만으로 이어지며 당뇨병, 고지혈증, 고혈압, 대사증후군과 같은 만성질환을 동반하는 것으로 알려진다. 소아 청소년의 비만은 체력, 신체활동, 좌식생활의 증가 및 서구화된 식이 습관과 같은 생활습관과 밀접한 관련이 있다. 따라서 균형 잡힌 식이습관과 유산소성 운동 그리고 적절한 저항성 운동을 개입시키고 좌식시간을 수정하는 것이 비만 치료에 권고된다. 본 미니 종설에서는 소아 청소년 비만 치료에 효과적인 수단으로써 다각적인 신체활동 전략에 대해 고찰하였다.

• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.547-557
• /
• 2009

LIDAR (LIght Detection And Ranging) is an active remote sensing technology which provides 3D coordinates of the Earth's surface by performing range measurements from the sensor. Early small footprint LIDAR systems recorded multiple discrete returns from the back-scattered energy. Recent advances in LIDAR hardware now make it possible to record full digital waveforms of the returned energy. LIDAR waveform decomposition involves separating the return waveform into a mixture of components which are then used to characterize the original data. The most common statistical mixture model used for this process is the Gaussian mixture. Waveform decomposition plays an important role in LIDAR waveform processing, since the resulting components are expected to represent reflection surfaces within waveform footprints. Hence the decomposition results ultimately affect the interpretation of LIDAR waveform data. Computational requirements in the waveform decomposition process result from two factors; (1) estimation of the number of components in a mixture and the resulting parameter estimates, which are inter-related and cannot be solved separately, and (2) parameter optimization does not have a closed form solution, and thus needs to be solved iteratively. The current state-of-the-art airborne LIDAR system acquires more than 50,000 waveforms per second, so decomposing the enormous number of waveforms is challenging using traditional single processor architecture. To tackle this issue, four parallel LIDAR waveform decomposition algorithms with different work load balancing schemes - (1) no weighting, (2) a decomposition results-based linear weighting, (3) a decomposition results-based squared weighting, and (4) a decomposition time-based linear weighting - were developed and tested with varying number of processors (8-256). The results were compared in terms of efficiency. Overall, the decomposition time-based linear weighting work load balancing approach yielded the best performance among four approaches.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.723-732
• /
• 2019

Globally road transport networks are subjected to continuous levels of stress from increasing loading and environmental effects. As the most popular mean of transport in the UK the condition of this civil infrastructure is a key indicator of economic growth and productivity. Structural Health Monitoring (SHM) systems can provide a valuable insight to the true condition of our aging infrastructure. In particular, monitoring of the displacement of a bridge structure under live loading can provide an accurate descriptor of bridge condition. In the past B-WIM systems have been used to collect traffic data and hence provide an indicator of bridge condition, however the use of such systems can be restricted by bridge type, assess issues and cost limitations. This research provides a non-contact low cost AI based solution for vehicle classification and associated bridge displacement using computer vision methods. Convolutional neural networks (CNNs) have been adapted to develop the QUBYOLO vehicle classification method from recorded traffic images. This vehicle classification was then accurately related to the corresponding bridge response obtained under live loading using non-contact methods. The successful identification of multiple vehicle types during field testing has shown that QUBYOLO is suitable for the fine-grained vehicle classification required to identify applied load to a bridge structure. The process of displacement analysis and vehicle classification for the purposes of load identification which was used in this research adds to the body of knowledge on the monitoring of existing bridge structures, particularly long span bridges, and establishes the significant potential of computer vision and Deep Learning to provide dependable results on the real response of our infrastructure to existing and potential increased loading.

• 분석과학
• /
• 제32권5호
• /
• pp.163-172
• /
• 2019

Methamphetamine (MA) is currently the most abused illicit drug in Korea and its major metabolite is amphetamine (AP). As MA exist as two enantiomers with the different pharmacological properties, it is necessary to determine their respective amounts in a sample. Thus a chiral stationary phase liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was developed for identification and quantification of d-MA, l-MA, d-AP, and l-AP in human urine. Urine sample ($200{\mu}L$) was diluted with pure water and purified using solid-phase extraction (SPE) cartridge. A $5-{\mu}L$ aliquot of SPE treated sample solution was injected into LC-MS/MS system. Chiral separation was carried out on the Astec Chirobiotic V2 column with an isocratic elution for each enantiomer. Identification and quantification of enantiomeric MA and AP was performed using multiple reaction monitoring (MRM) detection mode. Linear regression with a $1/x^2$ as the weighting factor was applied to generate a calibration curve. The linear ranges were 25-1000 ng/mL for all compounds. The intra- and inter-day precisions were within 3.6 %, while the intra- and inter-day accuracies ranged from -5.4 % to 11.8 %. The limits of detection were 2.5 ng/mL (d-MA), 3.5 ng/mL (l-MA), 7.5 ng/mL (d-AP), and 7.5 ng/mL (l-AP). Method validation parameters such as selectivity, matrix effect, and stability were evaluated and met acceptance criteria. The applicability of the method was tested by the analysis of genuine forensic urine samples from drug abusers. d-MA is the most common compound found in urine and mainly used by abusers.

• Structural Engineering and Mechanics
• /
• 제55권6호
• /
• pp.1261-1278
• /
• 2015

Due to their low intrinsic damping, stay cables in cable-stayed bridges have often exhibited unanticipated and excessive vibrations which result in increasing maintenance frequency and disruption to normal operations of the entire bridges. Mitigation of undesired cable vibration can be achieved by attaching an external damping device near the anchorage. High Damping Rubber (HDR) dampers have many advantages such as compact size, better aesthetics, easy maintenance, temperature stability, and cost benefits; therefore, they have been widely used to increase cable damping. Although a single damper has been shown to reduce cable vibrations, it is not the most effective method due to geometric constraints. This paper proposes the use of two HDR dampers to improve effectiveness and robustness in suppressing cable vibration. Oscillation parameters of the cable-dampers system were investigated in detail by modeling the stay cable as a taut string and each HDR damper as complex-valued impedance and by using an analytical formulation of the complex eigenvalue problem. The problem of two HDR dampers arbitrarily located along a cable is solved and the solution is discussed. Asymptotic formulas to calculate the damping ratios of the cable with two HDR dampers installed near the anchorage(s) are proposed and compared with the exact solutions. Further, a design example is presented in order to justify the methodology. The results of this study show that when the two HDR dampers are installed close to each other on the same end of the cable, some interaction between the dampers leads to reduced damping ratio. When the dampers are on the opposite ends of the cable, they are effective in increasing damping ratio and can provide better vibration reduction to multiple modes.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.80-87
• /
• 2015

The proliferation of the Internet and communication technologies and applications, besides the conventional retailers, has led to a new form of distribution channel, namely home sopping through the telephone, TV, catalog or the Internet. The conventional and new distribution channels have different transaction costs perceived by the consumers in the following perspectives: the accessibility to the product information, the traffic cost and the opportunity cost for the time to visit the store, the possibility of 'touch and feel' to test the quality of the product, the delivery time and the concern for the security for the personal information. Difference in the transaction costs between the distribution channels results in the different selling prices even for the same product. Moreover, distribution channels with different selling prices necessarily result in different business surpluses. In this paper, we study the multilateral bargaining strategy of a manufacturer who sells a product through multiple distribution channels with different transaction costs. We first derive the Nash equilibrium solutions for both simultaneous and sequential bargaining games. The numerical analyses for the Nash equilibrium solutions show that the optimal bargaining strategy of the manufacturer heavily depends not only on the degree of competition between the distribution channels but on the difference of the business surpluses of the distribution channels. First, it is shown that there can be four types of locally optimal bargaining strategies if we assume the market powers of the manufacturer over the distribution channels can be different. It is also shown that, among the four local optimal bargaining strategies, simultaneous bargaining with the distribution channels is the most preferred bargaining strategy for the manufacturer.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.227-235
• /
• 2015

본 논문은 NP-완전으로 알려진 최대 클릭의 정확한 해를 선형시간으로 찾는 알고리즘을 제안하였다. 먼저, 주어진 그래프 G=(V,E)에서 최대 차수 ${\Delta}(G)$ 정점 $v_i$를 클릭의 대표 정점으로 결정한다. $v_i$ 인접 정점 $N_G(v_i)$에서 ${\Delta}(G)$ 정점 $v_j$를 선택하여 $N_G(v_i){\cap}N_G(v_j)$를 후보 클릭 w와 $v_k$로 결정한다. $d_G(v_k)$ 내림차순으로 $w=w{\cap}N_G(v_k)$를 얻는다. 마지막으로, $G{\backslash}w$그래프에서 동일한 절차를 수행하여 얻은 클릭이 기존에 얻은 클릭과 동일하거나 크면 이 클릭을 선정하는 검증과정을 거쳤다. 이와 같은 방법으로 독립된 다수의 클릭도 얻을 수 있는 장점이 있다. 제안된 알고리즘을 다양한 정규와 비정규 그래프에 적용한 결과 모든 그래프에 대해 선형시간 O(n)으로 정확한 해를 구하였다.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.183-188
• /
• 2021

Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

• Journal of Biomedical and Translational Research
• /
• 제19권4호
• /
• pp.130-139
• /
• 2018

This study aimed to analyze a high-performance liquid chromatography (HPLC) separation using a pentafluorophenyl column of parent drug hydroxychloroquine (HCQ) and its active metabolite, desethylhydroxchloroquine (DHCQ) applying to determine bioequivalence of two different formulations administered to patients. A rapid, simple, sensitive and specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been developed and validated for bioanalysis of HCQ and its metabolite DHCQ in human whole blood using deuterium derivative $hydroxychloroquine-D_4$ as an internal standard (IS). A triple-quadrupole mass spectrometer was operated using electrospray ionization in multiple reaction monitoring (MRM) mode. Sample preparation involves a two-step precipitation of protein techniques. The removed protein blood samples were chromatographed on a pentafluorophenyl (PFP) column ($50mm{\times}4.6mm$, $2.6{\mu}m$) with a mobile phase (ammonium formate solution containing dilute formic acid) in an isocratic mode at a flow rate of 0.45 mL/min. The standard curves were found to be linear in the range of 2 - 500 ng/mL for HCQ; 2 - 2,000 ng/mL for DHCQ in spite of lacking a highly sensitive MS spectrometry system. Results of intra- and inter-day precision and accuracy were within acceptable limits. A run time of 2.2 min for HCQ and 2.03 min for DHCQ in blood sample facilitated the analysis of more than 300 human whole blood samples per day. Taken together, we concluded that the assay developed herein represents a highly qualified technology for the quantification of HCQ in human whole blood for a parallel design bioequivalence study in a healthy male.