• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.11-20
• /
• 2010

In situation that carbon dioxide emissions are being increased as urbanization, urban green space is being promoted as an alternative to find solution for these problems. In urban areas, trees have the ability to reduce carbon dioxide as well as to be aesthetic effect. In this study, we proposed the methodology which uses only LIDAR data in order to extract these trees information effectively. To improve the operational efficiency according to the extraction of trees, the proposed methodology was carried out using multiple data processing such as point, polygon and raster. Because the existing NDSM(Normalized Digital Surface Model) contains both the building and tree information, it has the problems of high complexity of data processing for extracting trees. Therefore, in order to improve these problems, this study used modified NDSM which was removed estimate regions of building. To evaluate the performance of the proposed methodology, three different zones which coexist buildings and trees within urban areas were selected and the accuracy of extracted trees was compared with the image taken by digital camera.

• Journal of Arbitration Studies
• /
• v.13 no.1
• /
• pp.125-167
• /
• 2003

ADR program is designed to solve the problem such as the increase of suits and decision delayed. ADR program has the several significances, decreasing inappropriate cost as time and burden of courts, providing an approachable measure of relief and more efficient tool for settlement of dispute. Particularly ADR program satisfies the needs Intellectual property disputes need specialists that are versed in the subjected problem and, need to be souled quickly in confidence. And parties concerned are not good at the strict judicial procedure in courts, At this point, ADR program holds some advantages over court proceeding for intellectual property disputes. Specialists can be selected as arbitrators or mediator; Cofidentiality may be preserved; Flexibility allows settlement based on mutual commercial interests; Single solution is possible for multiple disputes involving parties from different countries. However, ADR program has not been properly used in. Korea, which is due to not only the lack of understanding the ADR program, but the poor number of filings and settlements. Intermediaries are not professional and also they do not take active hands in disputes. Sometimes, their fairness is asked as peacemakers. Eventually, it is said that this program is not enough to settle international disputes. To activate the ADR program, we can propose the ADR program annexed to court for example. And we can introduce the conciliation and arbitration to disputes in intellectual property. Traditionally arbitration has been a crucial issue in intellectual property disputes. In that intellectual property rights are granted by the local sovereign power, many legal systems in the past maintained the position that the existence, extent, meaning and application of such rights could only be definitively decided by the granting authority or the courts of that country. There is wide recognition that the arbitration of intellectual property is desirable. The law in most of the major countries has been changed in recent years in favor of arbitrability of intellectual property rights. We can also propose ADR on-line.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.175-185
• /
• 1998

In this paper, we studied some design methodologies of typical FIR filters based on the peak-error constrained least square criterion which was first introducedd by Adams in 1991. This method is a mixed type of the classical least squared error method(LSM) and the so-called min-max error method (MMM). And by considering both the least squared error as well as the maximum error, the solution, i.e. the impulse response of the filter, can be found only when the restrictions on maximum gain, transition bandwidth, and the squared error are satisfied simultaneously under some trade-off conditions. We used the multiple exchange algorithms for optimization procedure and applied the design methodology to the cases of the multiband filter, the differentiator, and the Hilbert transformer by taking the balance of two design criteria into account. The results show that the peak-error constrained least weighted square error design method(PLEM) is superior in performance to the existing LSM and MMM from both the squared error and the maximum error standpoints. And it is verified that PLEM can be applied to not only the case of simple low pass filter, but also to various types of FIR filters.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.444-454
• /
• 2005

Recently, the requirements of multi-resolution models of a solid model, which represent an object at multiple levels of feature detail, are increasing for engineering tasks such as analysis, network-based collaborative design, and virtual prototyping and manufacturing. The research on this area has focused on several topics: topological frameworks for representing multi-resolution solid models, criteria for the level of detail (LOD), and generation of valid models after rearrangement of features. As a solution to the feature rearrangement problem, the new concept of the effective zone of a feature is introduced in the former part of the paper. In this paper, we propose a feature-based non-manifold modeling system to provide multi-resolution models of a feature-based solid or non-manifold model on the basis of the effective feature zones. To facilitate the implementation, we introduce the class of the multi-resolution feature whose attributes contain all necessary information to build a multi-resolution solid model and extract LOD models from it. In addition, two methods are introduced to accelerate the extraction of LOD models from the multi-resolution modeling database: the one is using an NMT model, known as a merged set, to represent multi-resolution models, and the other is storing differences between adjacent LOD models to accelerate the transition to the other LOD. We also suggest the volume of the feature, regardless of feature type, as a criterion for the LOD. This criterion can be used in a wide range of applications, since there is no distinction between additive and subtractive features unlike the previous method.

• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.271-276
• /
• 2007

A simple and efficient protocol was developed for culturing Cu-tolerant and Cu-accumulating plants via pre-adaptation to Cu during plant tissue culture. We induced multiple shoots from begonia (Begonia evansiana Andr.) leaf explants on MS medium supplemented with naphtaieneacetic acid and benzyladenine. After 3 months, small plantlets were transferred to MS medium supplemented with $100{\mu}M\;CuCl_2$ for pre-adaptation to Cu and cultured for 5 months. Then, these plantlets were individually planted in pots containing artificial soil. An additional 500 mg of Cu dissolved in 1/4 strength MS solution was applied to each pot during irrigation over the course of 2 months. We planted pre-adapted and control begonias in soil from the II-Kwang Mine, an abandoned Cu mine in Pusan, Korea, to examine their ability to tolerate and accumulate Cu for phytore-mediation. Pre-adapted begonias accumulated $1,200{\mu}g$ Cu/g dry root tissue over the course of 45 days. On the other hand, non-Cu-adapted controls accumulated only $85{\mu}g$ Cu/g dry root tissue. To enhance Cu extraction, chelating agents, ethylenediamine tetraacetic acid (EDTA)-dipotassiun and pyridine-2,6-dicarboxylic acid (PDA), were applied. While the chelating agents did not enhance accumulation of Cu in the roots of control begonias, EDTA application increased the level of Cu in the roots of pre-adapted begonias twofold (to $2,500{\mu}g$ Cu/g dry root tissue). Because pre-adapted begonias accumulated a large amount of Cu, mainly in their roots, they could be used for phytostabilization of Cu-contaminated soils. In addition, as a flowering plant, begonias can be used to create aesthetically pleasing remediation sites.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.120-127
• /
• 2011

Checkpointing is one of common methods of realizing fault-tolerance for real-time systems. This paper presents a scheme to determine checkpoint intervals using probabilistic optimization. The considered real-time systems comprises multiple tasks in which transient faults can happen with a Poisson distribution. Also, multi-tasks are scheduled by the non-preemptive Rate Monotonic (RM) algorithm. In this paper, we present an optimization problem where the probability of task completion is described by checkpoint numbers. The solution to this problem is the optimal set of checkpoint numbers and intervals that maximize the probability. The probability computation includes schedulability test for the non-preemptive RM algorithm with respect to given numbers of checkpoint re-execution. A case study is given to show the applicability of the proposed scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.458-464
• /
• 2015

This paper proposes a portable 3-D scanning technique using a laser pointer. 3-D scanning is a process that acquires surface information from an 3-D object. There have been many studies on 3-D scanning. The methods of 3-D scanning are summarized into some methods based on multiple cameras, line lasers, and light pattern recognition. However, those methods has major disadvantages of their high cost and big size for portable appliances such as smartphones and digital cameras. In this paper, a 3-D scanning system using a low-cost and small-sized laser pointer are introduced to solve the problems. To do so, we propose a 3-D localization technique for a laser point. The proposed method consists of two main parts; one is a fast recognition of input images to obtain 2-D information of a point laser and the other is calibration based on the least-squares technique to calculate the 3-D information overall. To verified our method, we carry out experiments. It is proved that the proposed method provides 3-D surface information although the system is constructed by extremely low-cost parts such a chip laser pointer, compared to existing methods. Also, the method can be implemented in small-size; thus, it is enough to use in mobile devices such as smartphones.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.573-585
• /
• 1997

In this paper, a new architecture for communication termial system that can support multiple communication servies simultaneously in ATM enviromment is proposed , and the prototype multimedia communication ter-minal system with the proposed architecture is introsuced.The proposed architecture can be used as a solution of cheap and dffecive implementation of multimedia comunication terminal system having interoperaqbility in heterogrneous network environment, because we cinsidet the international standarsd, the technical difficulties for the system implementation, and the requirment of media qualties needed for each multimedia communi-cation services fot the system archietcture design.The introduced multimedia communication termial is designed with proposed communication terminal reference model.The system can not be the target system in the B-ISDN era.But, the system may be the most effective one that can be used as the cost dffective terminal in the present time and by present technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.291-297
• /
• 2014

Due to the rapid increase in demand for transportation of human and freight in modern railway systems, the CBTC system has been proposed, which is the solution for improvement of the line capacity that has been limited by the conventional track circuit based train control system. In the CBTC system, higher reliability of the communication system should be guaranteed for the safety of passengers and trains. However, due to the inherent characteristics of the wireless channel environment, performance degradations are inevitable. The diversity techniques can increase the reliability of data transmission using multiple antennas. In this paper, we investigate the performance of the STBC in the railway channel environment. Rician fading model is used for the viaduct scenarios which take important roles in the railway system. Also, considered is the Doppler effect which is an important factor in the mobile communication system. Simulations are performed to analyze the performance of the STBC in various channel environments. Results show that the performance degradation due to the phase error in viaduct scenarios is independent of the diversity order but is affected by the constellation of the modulation.

• BMB Reports
• /
• v.35 no.2
• /
• pp.143-154
• /
• 2002

The structural and functional aspects of ervatamin B were studied in solution. Ervatamin B belongs to the $\alpha+\beta$ class of proteins. The intrinsic fluorescence emission maximum of the enzyme was at 350 nm under neutral conditions, and at 355 nm under denaturing conditions. Between pH 1.0-2.5 the enzyme exists in a partially unfolded state with minimum or no tertiary structure, and no proteolytic activity. At still lower pH, the enzyme regains substantial secondary structure, which is predominantly $\beta$-sheet conformation and shows a strong binding to 8-anilino-1-napthalene-sulfonic acid (ANS). In the presence of salt, the enzyme attains a similar state directly from the native state. Under neutral conditions, the enzyme was stable in urea, while the guanidine hydrochloride (GuHCl) induced equilibrium unfolding was cooperative. The GuHCl induced unfolding transition curves at pH 3.0 and 4.0 were non-coincidental, indicating the presence of intermediates in the unfolding pathway. This was substantiated by strong ANS binding that was observed at low concentrations of GuHCl at both pH 3.0 and 4.0. The urea induced transition curves at pH 3.0 were, however, coincidental, but non-cooperative. This indicates that the different structural units of the enzyme unfold in steps through intermediates. This observation is further supported by two emission maxima in ANS binding assay during urea denaturation. Hence, denaturant induced equilibrium unfolding pathway of ervatamin B, which differs from the acid induced unfolding pathway, is not a simple two-state transition but involves intermediates which probably accumulate at different stages of protein folding and hence adds a new dimension to the unfolding pathway of plant proteases of the papain superfamily.