• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.31-36
• /
• 2014

In this study, the influence of the control and operational parameters within a sewage treatment plant were reviewed by performing multiple regression analysis on the effluent quality of the sewage treatment. The data used for this review are based on the actual data from a sewage treatment plant using the media process within the year 2012. The prediction models of chemical oxygen demand ($COD_{Mn}$) and total nitrogen (T-N) within the effluent of the 2nd settling tank based on the multiple regression analysis yielded the prediction accuracy measurements of 0.93 and 0.84, respectively; and it was concluded that the model was accurately predicting the variances of the actual observed values. If the data on the energy spent on each operating condition can be collected, then the operating parameter that conserves energy without violating the effluent quality standards of COD and T-N can be determined using the regression model and the standardized regression coefficients. These results can provide appropriate operation guidelines to conserve energy to the operators at sewage treatment plants that consume a lot of energy.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.58-76
• /
• 1994

In order to study factors affecting the use of the ambulatory physician services. Andersen's model for health utilization was modified by adding the health behavior component and examined with three different approaches. Three different approaches were the multiople regression model, logistic regression model, and LISREL model. For multiple regression, dependent variable was reported illness-related visits to a physician during past one year and independent variables are variaous variables measuring predisposing factor, enabling factor, need factor and health behavior. For the logistic regression, dependent variable was visit or no-visit to a physician during past one year and independent variables were same as the multiple regression analysis. For the LISREL, five endogenous variables of health utiliztion, predisposing factor, enabling factor, need factor, and health behavior and 20 exogeneous variables which measures five endogenous variables were used. According to the multiple regression analysis, chronic illness, health status, perceived health status of the need factor; residence, sex, age, marital status, education of the predisposing factor ; health insurance, usual source for medical care of enabling factor were the siginificant exploratory variables for the health utilization. Out of the logistic regression analysis, health status, chronic illness, residence, marital status, education, drinking, use of health aid were found to be significant exploratory variables. From LISREL, need factor affect utilization most following by predisposing factor, enabling factor and health behavior. For LISREL model, age, education, and residence for predisposing factor; health status, chronic illess, and perceived health status for need factor; medical insurance for enabling factor; and doing any kind of health behavior for the health behavior were found as the significant observed variables for each theoretical variables.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1443-1450
• /
• 2015

Wastewater treatment plant(WWTP) has been recognized as a high energy consuming plant. Usually many WWTPs has been operated in the excessive operation conditions in order to maintain stable wastewater treatment. The energy required at WWTPs consists of various subparts such as pumping, aeration, and office maintenance. For management of energy comes from process operation, it can be useful to operators to provide some information about energy variations according to the adjustment of operational variables. In this study, multiple regression analysis was used to establish an energy estimation model. The independent variables for estimation energy were selected among operational variables. The $R^2$ value in the regression analysis appeared 0.68, and performance of the electric power prediction model had less than ${\pm}5%$ error.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.625-629
• /
• 2013

The objective of this study is to develop and evaluate simple and multiple regression models for Total Organic Carbon (TOC) concentration estimation in stream flow. For development (using water quality data in 2012) and evaluation (using water quality data in 2011) of regression models, we used water quality data from downstream of Yeongsan river basin during 2011 and 2012, and correlation analysis between TOC and water quality parameters was conducted. The concentrations of TOC were positively correlated with Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), TN (Total Nitrogen), Water Temperature (WT) and Electric Conductivity (EC). From these results, simple and multiple regression models for TOC estimation were developed as follows : $TOC=0.5809{\times}BOD+3.1557$, $TOC=0.4365{\times}COD+1.3731$. As a result of the application evaluation of the developed regression models, the multiple regression model was found to estimate TOC better than simple regression models.

• Communications for Statistical Applications and Methods
• /
• 제23권3호
• /
• pp.231-239
• /
• 2016

A graphical diagnostic method based on multiple case deletions in a regression context is introduced by using the sampling distribution of the difference between two least squares estimators with and without multiple cases. Principal components analysis plays a key role in deriving this diagnostic method. Multiple case deletions of test statistic are also considered when a new observation is fitted to a given regression model. The result is useful for detecting influential observations in econometric data analysis, for example in checking whether the consumption pattern at a later time is the same as the one found before or not, as well as for investigating the influence of cases in the usual regression model. An illustrative example is given.

• 수산해양기술연구
• /
• 제60권1호
• /
• pp.57-70
• /
• 2024

In order to present a predictive drift model, Jeju National University's training ship was tested for about 11 hours and 40 minutes, and 81 samples that selected one of the entire samples at ten-minute intervals were subjected to regression analysis after verifying outliers and influence points. In the outlier and influence point analysis, although there is a part where the wind direction exceeds 1 in the DFBETAS (difference in Betas) value, the CV (cumulative variable) value is 6%, close to 1. Therefore, it was judged that there would be no problem in conducting multiple regression analyses on samples. The standard regression coefficient showed how much current and wind affect the dependent variable. It showed that current speed and direction were the most important variables for drift speed and direction, with values of 47.1% and 58.1%, respectively. The analysis showed that the statistical values indicated the fit of the model at the significance level of 0.05 for multiple regression analysis. The multiple correlation coefficients indicating the degree of influence on the dependent variable were 83.2% and 89.0%, respectively. The determination of coefficients were 69.3% and 79.3%, and the adjusted determination of coefficients were 67.6% and 78.3%, respectively. In this study, a more quantitative prediction model will be presented because it is performed after identifying outliers and influence points of sample data before multiple regression analysis. Therefore, many studies will be active in the future by combining them.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4189-4200
• /
• 2021

In this study, the relationship between the environmental radiation dose rate and meteorological variables was investigated with multiple regression analysis and big data of those variables. The environmental radiation dose rate and 36 different meteorological variables were measured on Ulleung Island, Republic of Korea, from 2011 to 2015. Not all meteorological variables were used in the regression analysis because the different meteorological variables significantly affect the environmental radiation dose rate during different periods, and the degree of influence changes with time. By applying the Pearson correlation analysis and stepwise selection methods to the big dataset, the major meteorological variables influencing the environmental radiation dose rate were identified, which were then used as the independent variables for the regression model. Subsequently, multiple regression models for the monthly datasets and dataset of the entire period were developed.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.129-132
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process -control in various fields. First of all, in this method, initial values of DC motor are determined by the Ziegler-Nichols method. Finally, after studying the parameters of PID controller by input vector of multiple regression analysis, when we give new K, L, T values to multiple regression model, the optimized parameters of PID controller is found by multiple regression analysis program.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.83-91
• /
• 2012

PURPOSES : This study deals with Rotary by Accident Occurrence Location. The purpose of this study is to develop the accident models of rotary by location. METHODS : In pursuing the above, this study gives particular attentions to developing the appropriate models using multiple linear, Poisson and negative binomial regression models and statistical analysis tools. RESULTS : First, four multiple linear regression models which are statistically significant(their $R^2$ values are 0.781, 0.300, 0.784 and 0.644 respectively) are developed, and four Poisson regression models which are statistically significant(their ${\rho}^2$ values are 0.407, 0.306, 0.378 and 0.366 respectively) are developed. Second, the test results of fitness using RMSE, %RMSE, MPB and MAD show that Poisson regression model in the case of circulatory roadway, pedestrian crossing and others and multiple linear regression model in the case of entry/exit sections are appropriate to the given data. Finally, the common variable that affects to the accident is adopted to be traffic volume. CONCLUSIONS : 8 models which are all statistically significant are developed, and the common and specific variables that are related to the models are derived.

• Journal of Korea Artificial Intelligence Association
• /
• 제1권2호
• /
• pp.21-25
• /
• 2023

The purpose of this study was to compare the performance using multiple regression models to predict the energy consumption of steel industry. Specific independent variables were selected in consideration of correlation among various attributes such as CO2 concentration, NSM, Week Status, Day of week, and Load Type, and preprocessing was performed to solve the multicollinearity problem. In data preprocessing, we evaluated linear and nonlinear relationships between each attribute through correlation analysis. In particular, we decided to select variables with high correlation and include appropriate variables in the final model to prevent multicollinearity problems. Among the many regression models learned, Boosted Decision Tree Regression showed the best predictive performance. Ensemble learning in this model was able to effectively learn complex patterns while preventing overfitting by combining multiple decision trees. Consequently, these predictive models are expected to provide important information for improving energy efficiency and management decision-making at steel industry. In the future, we plan to improve the performance of the model by collecting more data and extending variables, and the application of the model considering interactions with external factors will also be considered.