• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.484-490
• /
• 2002

The formation and stability of stationary laser weld keyholes were investigated using a numerical simulation. The effect of multiple reflections in the keyhole was estimated using the ray tracing method, and the free surface profile, flow velocity and temperature distribution were calculated numerically. In the simulation, the keyhole was formed by the displacement of the melt induced by evaporation recoil pressure, while surface tension and hydrostatic pressure opposed cavity formation. A transition mode having the geometry of the conduction mode with keyhole formation occurred between the conduction and keyhole modes. At laser powers of 500W and greater, the protrusion occurred on the keyhole wall, which resulted in keyhole collapse and void formation at the bottom. Initiation of the protrusion was caused mainly by collision of upward and downward flows due to the pressure components, and Marangoni flow had minor effects on the flow patterns and keyhole stability.bility.

• Communications for Statistical Applications and Methods
• /
• 제19권5호
• /
• pp.731-741
• /
• 2012

The Korean film industry has grown fast since the 2000s in terms of entering the 50% market share level, the emergence of 10million box-office movies and export performance improvement; however, the earning rate of production and investment part has decreased and recorded a minus value since 2005. This article aims to find key the determinants for the success of Korean movies from 2001~2006, a period of high growth and success of the Korean film industry through a multiple regression analysis. This paper introduces new determinants such as the interaction effect of the director and lead actor as well as mass culture codes. Finally, the authors suggest some proposals to make the Korean Film Industry more profitable.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.24-29
• /
• 2008

수치해석 모델을 적용하여 다중 볼트 접합부의 거동을 해석하였다. 기본 모델로 축력-휨 요소를 가정하고 해석을 실시하였으며, 프레임재의 효과와 철물의 효과를 구분하여 해석을 실시하였다. 기존의 해석적인 방법은 볼트의 개수가 2개까지만으로 제한될 경우는 어느 정도 정확도를 보여 줄 수 있어서 많은 시간이 소요되는 수치해석적 방법보다 장점이 있을 수 있다. 하지만 현실적으로 사용되고 있는 현장의 조건은 그 이상의 볼트를 사용하고 있는 실정이다. 또한 현장에서 사용되고 있는 볼트의 배치 및 배열 형태를 기존의 해석적 방법을 적용하여 거동 분석을 실시한다는 것은 불가능하다. 이러한 현실 조건을 고려하여 볼트 접합부의 정확한 거동해석을 실시하기 위해서는 수치해석적 방법을 적용하는 방법 이외에는 대안이 없다. 다양한 다중 볼트 접합부에 대해 수치해석 모델을 적용한 결과 광범위하게 사용되고 있는 항복모델 등의 기존의 경험적 해석방법에 비해 현실적인 접합부 여건 반영이 수월하고 정확성에 있어서 우수함을 볼 수 있었다.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.88-99
• /
• 2004

A development of a software on radar target signature analysis is presented in this paper The target signature includes Radar Cross Section(RCS) prediction, Range Profile(RP) processing and Inverse Synthetic Aperture Radar(ISAR) processing. Physical Optics(PO) is the basic calculation method for RCS prediction and Geometrical Optics(GO) is used for ray tracing in the field calculation of multiple reflection. For RP and ISAR, Fast Fourier Transform(FFT) and Matrix Pencil(MP) method were implemented for post-processing. Those results are integrated into two separate softwares named as Radar Target Signature Generator(RTSG) and Radar Target Signature Analyser(RTSA). Several test results show good performances in radar signature prediction and analysis.

• 한국과학교육학회지
• /
• 제27권8호
• /
• pp.743-754
• /
• 2007

Whether This paper argues that teacher efficacy is an affective affiliate of pedagogical content knowledge (PCK) based on empirical data of a study on the nature and construct of PCK. This study was a collective case study utilizing qualitative research methods. The participants of the study were three high school science teachers in the U.S. Data was collected from multiple sources such as classroom observation, interviews, teachers' written reflection, students' work samples, and researchers' field notes. Data was analyzed using the "In-depth Analysis of Explicit PCK" developed by the author. Data analysis indicated that teacher efficacy played a critical role in developing PCK by facilitating the movement from PCK to the enactment of PCK.

• 한국광학회지
• /
• 제10권5호
• /
• pp.373-378
• /
• 1999

투명한 유전체 박막과 관련된 측정 분야는 반도체 산업의 발전과 함께 급속히 성장하고 있으며, 회로의 고집적화 추세에 맞추어 고정밀도의 측정 성능을 요구하고 있다. 최근 웨이퍼의 광역 평탄화를 위한 CMP(chemical mechanical polishing)공정의 도입으로 인하여 박막의 두께뿐만 아니라 미세 형상에 대한 측정 요구가 증가하고 있다. 이 논문에서는 기존의 비접촉 표면 형상 측정법의 하나인 백색광 주사 간섭법을 이용하여 박막의 두께 형상을 측정하여 새로운 측정 알고리즘 제시하고자 한다. 이 방법은 기존의 백색광 간섭 신호 해석법의 하나인 주파수 분석법과 비선형 최소 자승법을 이용함으로써 구현된다. 그리고 실험을 통하여 개발된 알고리즘의 타당성을 검증한다.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.663-671
• /
• 2014

LED lamp arrangement is a critical issue in indoor visible light communication (VLC) system. In this paper, we analyze the illumination distribution under the arrangement of $2{\times}3$ and propose a method to find the optimal lamp arrangement. The method, based on the MIMO (Multiple Input/Multiple Output) system model and taking the first order reflection into consideration, enables accurate analysis of the arrangement of the LED lamps for any room. The studies show that under the optimal arrangement the uniformity of illumination is improved from 0.55 to 0.86, which guarantees that users can get almost equal lighting effects, no matter where they locate themselves. At the same time, the RMS delay spread distribution which is used to evaluate the inter-signal-interference (ISI) is analyzed, and the simulation results indicate that the optimal arrangement also can improve the communication quality by reducing the fluctuation of the RMS delay spread.

• 대한원격탐사학회지
• /
• 제6권2호
• /
• pp.115-133
• /
• 1990

Study was made on the spectral characteristics of rock samples including bentonites collected from the northern Ulsan area. The geology of the area consists mainly of sediments of the Kyongsang Series and Bulguksa granite, the Tertiary volcanics, andesites and tuffs. Relative reflectances of meshed samples(2.5~10mm) to BaSO$_4$ are measured at 6 Landsat TM spectral windows (excluding the thermal band) with HHRR, and their reflection charactristics were analysed. In addition, three different data selection schemes including the Eulidean distance, multiple regression, and PCA weight methods were applied to the 30 TM ratio channels, derived from the above 6 bands. The selected data sets were subject to two unsupervised classification techniques(FA and ISODATA) in order to compare the effectiveness for classification of particularly bentonite from others. As a result, in ISODATA analysis the multiple regression model shows the best, followed by the Euliean distances one. The PCA weight model seems to show some confusion. In FA, though difficult for quantitative analysis, the best still seems to be the regression model. Among ratio bands, rations of band 7 or 5 against other bands represent the best contribution in classification of bentonites from others.

• 보건교육건강증진학회지
• /
• 제6권1호
• /
• pp.34-47
• /
• 1989

The changing trend of longevity from 1955 through 1985 and its interprovincal variation were studied with longevity rate as indicator. In order to detect the affecting factors of longevity rate, eleven urbanalizational, geographic-environmental, demographic and social-economic variables were employed to carry out multiple stepwise regression analysis. The data used for this study were from Population Census Reports 1955-1985 published by EPB and Year book of Public Health and Social Statistics 1986 published by Ministry of Health and Social Affairs and other reference. Subsequent to that longevity rate decreased during 1950's it has increased continuously by the yeat of 1980's. This trend was especially remarkable in the south area and the GIRI mountain area in Korea. The stepwise regression analysis shows that the longevity rates were significantly associated with the independent variables, and the dependent variables explained at the level of 93.7percent-99.9 percent. Longevity is a reflection of the demographic and socio-economic, environmental and health resourses factor etc., longevity problems cannot be dealt with in isolation. The possible research and services which could be provided by government will be discuss.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.738-748
• /
• 2005

The ship radiated noise level fluctuates by the difference of interference and reverberation according to measurement methods and environmental conditions. These phenomena cause error of the source level estimation even in the same environment conditions. This paper describes a quantitative analysis and a reduction method for an error value to the source level estimation in spatial and temporal interference environment. The design criteria of the radiated noise measurement array composed of omni-directional hydrophones and the source level accuracy in the deep water range are given. The source level accuracy in the shallow water range is also derived based on the statistical model of the multiple reflection paths. The results are verified using the water tank experiment and the sea trial.