Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지

Numerical Behavior Analysis for the Various Multiple Bolted Connections

다양한 다중 볼트 접합부의 거동에 대한 수치해석

  • Received : 2007.12.28
  • Accepted : 2008.01.18
  • Published : 2008.05.25
Download PDF
⟨ Previous Next ⟩

Abstract

Numerical analysis model was used to analyse the behaviors of multiple bolted connections. Axial-bending element was supposed as basic model, and the effects of frame members and steel fasteners were classified for the behavior analysis. In the condition only two bolts were used, the traditional analytical methods, which show somewhat accuracy, have some advantages more than numerical analysis that need many time consuming, However, more many bolts were used in practical field condition. Also, it is impossible to analyse the behaviors of various bolts layouts and arrangements conditions by traditional analytical methods. Therefore, there is only numerical analysis method for the accurate behavioranalysis on the practical bolted connection condition. Therefore, numerical analysis method was applied on the various multiple bolted connections. On the result exactness and the reflection of connection condition, numerical analysis method showed the superiority more than widely used traditional empirical analysis methods as yield model.

수치해석 모델을 적용하여 다중 볼트 접합부의 거동을 해석하였다. 기본 모델로 축력-휨 요소를 가정하고 해석을 실시하였으며, 프레임재의 효과와 철물의 효과를 구분하여 해석을 실시하였다. 기존의 해석적인 방법은 볼트의 개수가 2개까지만으로 제한될 경우는 어느 정도 정확도를 보여 줄 수 있어서 많은 시간이 소요되는 수치해석적 방법보다 장점이 있을 수 있다. 하지만 현실적으로 사용되고 있는 현장의 조건은 그 이상의 볼트를 사용하고 있는 실정이다. 또한 현장에서 사용되고 있는 볼트의 배치 및 배열 형태를 기존의 해석적 방법을 적용하여 거동 분석을 실시한다는 것은 불가능하다. 이러한 현실 조건을 고려하여 볼트 접합부의 정확한 거동해석을 실시하기 위해서는 수치해석적 방법을 적용하는 방법 이외에는 대안이 없다. 다양한 다중 볼트 접합부에 대해 수치해석 모델을 적용한 결과 광범위하게 사용되고 있는 항복모델 등의 기존의 경험적 해석방법에 비해 현실적인 접합부 여건 반영이 수월하고 정확성에 있어서 우수함을 볼 수 있었다.

Keywords

References

  1. 김광철. 2007. 볼트 접합부의 거동 해석을 위한 수치해석 모델 개발. 목재공학. 35(3) : 1-9.
  2. 일본 건축학회. 1988. 목구조 계산 규준.동해설. pp. 144-205.
  3. Bodig, J., P. J. Pellicane, and R. N. Mutuku. 1991. Nonlinear superposition model for the behavior of bolted joints. Part 1:Joints laterally at angles to the grain. Wood Sci. Tech. (25) : 33-45.
  4. Bohnhoff, D. R., S. M. Cramer, R. C. Moody, and C. O. Cramer. 1987. Modelling vertically mechanically laminated wood members. ASAE, Paper No. 87-4520. pp. 14-25.
  5. Breyer, D. E. 1993. Design of wood structures. McGraw Hill. Ch. 11. Ch. 12.
  6. Chengmou, F. 1988. Behaviour of bolted in timber structure and design. Proceedings of the International Conference on Timber Engineering. 1 : 337-344.
  7. Doyle, D. V. 1964. Performance of joints with eight bolts in laminated Douglas-fir. FPL. Res. Pap., FPL-10. pp. 7-15.
  8. Fantozzi, J. 1995. Effects of bending moments on the tensile performance of multiple-bolted timber connections: Part I. A technique to model joints. Wood Fiber Sci. 27(1): 55-67.
  9. Kim, G.-C. and J.-J. Lee. 2000. Analysis of the behavior of bolt jointed wood connections by applying semi-rigid theory. J. of the Korean Wood Science and Technology. 28(4) : 73-83.
  10. Harding, N. and A. H. R. Fowkes. 1984. Bolted timber joints. Proceedings of Pacific Timber Engineering Conference. 3 : 872-883.
  11. Jensen. J. L., and H. J. Larsen. 1998. Modelling of semi-rigid joints and their influence on the behaviour of structures. Proceedings of the 5th World Conference on Timber Engineering. 2 : 305-312.
  12. Jorissen. A. 1996. Multiple fasteners timber connections with dowel type fasteners. Proceedings of the International Wood Engineering Conference. New Orleans, Louisiana, USA. 1 : 153-159.
  13. Mettem, C. J. and A. V. Page. 1992. Load distributions in multi-fastener bolted joints in European whitewood glulam with steel sideplates. Paper 25-7-12, CIB, Sweden. pp. 110-115.
  14. Peer, H. 1998. Progress in timber joint development and modelling. Proceedings of the 5th World Conference on Timber Engineering. 2 : 337-344.
  15. Rahman, M. U., Y. J. Chiang and R. E. Rowlands. 1988. Stress and failure analysis of double-bolted joints in Douglas-fir and Sitka spruce. Proceedings of the International Conference on Timber Engineering., Seattle (USA) 2 : 131-142.
  16. Soltis, L. A and T. L. Wilkinson. 1987. Bolted - connection design. General technical report FPL-GTR-54.
  17. Wilkinson T. L. 1980. Assessment of modification factors for a row of bolts or timber connectors. FPL. Res. Pap., FPL-376. pp. 20-23.
  18. Wilkinson T. L. 1986. Load distribution among bolts parallel to load. J. of Structural Engineering, ASCE. 112(7) : 835-852. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(835)