• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.580-588
• /
• 2009

In this study daily flow rates and delivered pollutant loads of Nakdong river basin are simulated with modified TANK model and minimum variance unbiased estimator. Based on the simulation results, flow duration curves, load duration curves, and delivery ratio duration curves have been established. Then GIS analysis is performed to obtain several hydrological geomorphic characteristics such as watershed area, stream length, watershed slope and runoff curve number. Finally, multiple regression analysis is carried out to estimate empirical equations for pollutants delivery ratio. The results show that there is positive relation between the flow rates and delivery ratios, and the proposed empirical formulas for delivery ratio can predict well river pollutant loads.

• Speech Sciences
• /
• v.13 no.3
• /
• pp.83-95
• /
• 2006

This study attempts to suggest a criterion of Korean language development. For this purpose we investigated speaking rates of the spontaneous utterances produced by 144 children, aged 3 to 8. We analyzed each subject's speaking rate and its relevance with speaker's age, gender and utterance length. To determine the relative contributions of variables to the speaking rate, multiple regression was conducted. Results of this study can be summarized as follows: (1) The mean and maximum values of the speaking rate increased with the growth of age. (2) A statistically significant increase in speaking rate appeared at two-year intervals. (3) There was no significant difference between male and female groups in the speaking rate. (4) The multiple regression analysis has shown that along with the speaker's age, the utterance length(the mean number of syllables per utterance) is also important in estimating the speaking rates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1611-1616
• /
• 2010

The purpose of this research was to determine the effect of surfactant micelles on lipid oxidation in W/O/W multiple emulsions. The content of ferric irons and hydroperoxide in the continuous phase in W/O/W multiple emulsions was measured as a function of Brij micelle. The concentration of ferric iron and hydroperoxide in the continuous phase increased with increased storage time (1~6 days). Lipid oxidation rates, as determined by the formation of lipid hydroperoxides, TBARs and headspace hexanal, in the W/O/W multiple emulsions containing ferric iron decreased when 3% surfactant micelles were exceeded. These results indicate that excess surfactant micelles could alter the physical location and prooxidant activity of iron in W/O/W multiple emulsions.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1069-1073
• /
• 2008

Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Although technologies exist to measure these factors, direct measurements are often difficult. The purpose of this study was to develop an alternative method to characterize indoor environmental factors by multiple indoor and outdoor measurements. Using a mass balance model and regression analysis, penetration factor (ventilation rate divided by the sum of ventilation rate and deposition constant) and source strength factor (source strength divided by the sum of ventilation rate and deposition constant) were calculated using multiple indoor and outdoor measurements. Subsequently, the ventilation rate and $NO_2$ generation rate were estimated. Mean of ventilation rate was 1.41 ACH in houses, assuming a residential N02 deposition constant of 0.94 $hr^{-1}$. Mean generation rate of $NO_2$ was 16.5 ppbv/hr. According to house characterization, inside smoking and family number were higher $NO_2$ generation rates, and apartment was higher than single-family house. In conclusion, indoor environmental factors were effectively characterized by this method using multiple indoor and outdoor measurements.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.3
• /
• pp.308-311
• /
• 2010

An experiment was conducted using indigenous Kivircik ewes to evaluate the effect of intravaginal progestagen sponges, containing 30 mg of fluorogestone acetate (FGA), followed by administration of pregnant mare serum gonadotrophin (PMSG) on inducing synchronized oestrus in the season and fertility. Three times of PMSG administration relative to sponge withdrawal (24 h before (n = 30), at (n = 29) or 24 h after (n= 29)) and two routes of PMSG administration (intramuscular (n = 46) and subcutaneous (n = 42) were compared for estrous response, number of multiple births and fecundity rates. There were no significant differences in terms of estrous response, due to differences in the time and route of PMSG administration. Lambing percentage, proportion of multiple births and fecundity were 75.6, 51.6 and 114.6%, respectively. The administration had a significant effect on lambing (p<0.05), multiple birth and fecundity rates (p<0.01). The subcutaneous administration of PMSG resulted in a significantly higher lambing rate (p<0.05) and fecundity rate (p<0.01), compared to the intramuscular injection of the PMSG.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.47-56
• /
• 2009

We investigate the connectivity of fading wireless ad-hoc networks with a pair of novel connectivity metrics. Our first metric looks at the problem of connectivity relying on the outage capacity of MIMO channels. Our second metric relies on a probabilistic treatment of the symbol error rates for such channels. We relate both capacity and symbol error rates to the characteristics of the underlying communication system such as antenna configuration, modulation, coding, and signal strength measured in terms of signal-to-interference-noise-ratio. For each metric of connectivity, we also provide a simplified treatment in the case of ergodic fading channels. In each case, we assume a pair of nodes are connected if their bi-directional measure of connectivity is better than a given threshold. Our analysis relies on the central limit theorem to approximate the distribution of the combined undesired signal affecting each link of an ad-hoc network as Gaussian. Supported by our simulation results, our analysis shows that (1) a measure of connectivity purely based on signal strength is not capable of accurately capturing the connectivity phenomenon, and (2) employing multiple antenna mobile nodes improves the connectivity of fading ad-hoc networks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.11-20
• /
• 2014

In this paper, a novel transmission scheme is proposed to improve the data rates of spatial modulation (SM) which has low complexity and improves the spectral efficiency in correlated channel environments. The conventional SM scheme utilizes partial multiple antennas to transmit signal constellations and additional bits using antenna combinations. Therefore the channel capacity of SM is less than that of the conventional multiple input-multiple output (MIMO) scheme which uses all the available antennas. In this paper, an SM transmission scheme is proposed to improve the channel capacity using a tight frame pre-coder. The improvement in channel capacity of the SM scheme will be shown using computer simulations.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.93-100
• /
• 2004

For accurate construction contract time estimation, few parameters are more significant than crew production rates and factors affecting the rates. However, statistical analysis techniques for finding such factors are not always simple mainly because there are many factors and the interaction between factors is not well quantitatively understood. This paper presents methodology of identifying factors driving crew production rates. The methodology is further demonstrated with representative data collected by the author from 13 on-going highway constructions. Three factors were identified as statistically significant drivers of Cap crew production rate: 'Cap Size (m3/ea)'; 'Cap Length (m)'; and 'Cap Shape (Rectangle vs. Inverted 'T')'. It was also found that the production rates are best explained by a multiple regression model with two of the drivers; 'Cap Size' and 'Cap Shape'.