• KSTLE International Journal
• /
• v.4 no.1
• /
• pp.14-17
• /
• 2003

The electrical and rheological properties of a chitosan malonate suspension in silicone oil was investigated by varying the electric fields, volume fractions of particles, and shear rates, respectively, The chitosan malonate susepnsion showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of multiple chains upon application of an electric field. The shear stress fur the suspension exhibited a linear dependence on the volume fraction and an electric field power of 1.88. On the basis of the experimental results, the newly synthesized chitosan malonate suspension was found to be an anhydrous ER fluid.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1231-1236
• /
• 2008

The flow and heat transfer performance were measured at high temperatures in CFB heat exchanger with multiple risers and downcomers. The theoretical model for predicting heat exchanger performance was developed in this study. The model predictions were compared with the measured heat transfer rates to show relatively good agreement. The maximum gas cooling rate was $20,300^{\circ}C/sec$, and the dioxin reduction rate was 68%.

• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.101-109
• /
• 1999

In a commercial facsimile network system, a simulation analysis has been performed using ARENA due to the unavailability of theoretical models. The effect of a priority is compared with that of the current FCFS rule on the arriving call blocking rate and transmission time delay. The result shows that the priority rule reduces more service time delay as the arrival rate increases. A simulation analysis procedure is proposed to select optimal in/out port ratio at various hourly arrival rates with a given multiple-place transmission requests ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.817-826
• /
• 1987

An offset-free self-tuning control with pole placement (STCPP) and a recursive parameter estimation with multiple and variable forgetting factors (REWF), together with their application to a real plant, are described. There are two different types of offset-free STCPP; their features are analysed and discussed. REMVF employs as many forgetting factors as parameter estimates. It is suitable when parameters to be estimated are changing at different rates. The offset-free STCPP and REMVF have been successfully applied to a real plant, giving excellent results.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.8-13
• /
• 2015

The experimental design methodology was applied in the drop tube furnace (DTF) to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of DTF. The dependent variables such as burnout ratios (BOR) of coal and $CO/CO_2$ ratios were mathematically described as a function of three independent variables (coal particle size, carrier gas flow rate, wall temperature) being modeled by the use of the central composite design (CCD), and evaluated using a second-order polynomial multiple regression model. The prediction of BOR showed a high coefficient of determination (R2) value, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the simulation data. However, $CO/CO_2$ ratio had a big difference between calculated values and predicted values using conventional RSM, which might be mainly due to the dependent variable increses or decrease very steeply, and hence the second order polynomial cannot follow the rates. To relax the increasing rate of dependent variable, $CO/CO_2$ ratio was taken as common logarithms and worked again with RSM. The application of logarithms in the transformation of dependent variables showed that the accuracy was highly enhanced and predicted the simulation data well.

• Journal of Computing Science and Engineering
• /
• v.7 no.3
• /
• pp.168-176
• /
• 2013

Long-term evolution (LTE) is emerging as a major candidate for 4G cellular networks to satisfy the increasing demands for mobile broadband services, particularly multimedia delivery. Multiple-input multiple-output (MIMO) technology combined with orthogonal frequency division multiple access and more efficient modulation/coding schemes (MCS) are key physical layer technologies in LTE networks. However, in order to fully utilize the benefits of the advances in physical layer technologies, the MIMO configuration and MCS need to be dynamically adjusted to derive the promised gains of 4G at the application level. This paper provides a performance evaluation of video traffic with variations in the physical layer transmission parameters to suit the varying channel conditions. A quantitative analysis is provided using the perceived video quality as a video quality measure (evaluated using no-reference blocking and blurring metrics), as well as transmission delay. Experiments are performed to measure the performance with changes in modulation and code rates in poor and good channel conditions. We discuss how an adaptive scheme can optimize the performance over a varying channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.747-749
• /
• 2016

We consider a time-division multiple-access relay channel (MARC), in which two source nodes (SNs) transmit data with different data rate to a destination node (DN) with the help of a relay node (RN) using network coding (NC). However, due to its asymmetric data rate, the RN cannot combine the received bits by XOR NC. In this paper, we compare with the problem of asymmetric data rates by using zero padding and hierarchical 16QAM.

• Journal of Chest Surgery
• /
• v.28 no.4
• /
• pp.346-354
• /
• 1995

Records of 71 consecutive patients who had received multiple valve replacement were reviewed[34male,37female,mean age 40.5$\pm$11.2 <14-63> . The early death rate was 2.8%[2/71 . A completed follow-up rate of 95.7% was accomplished in these 69 patients who left hospital[mean 42.5 $\pm$29.5 patients-years . Five of these patients died. The late death rate was 7.2%. Four patients experienced anticoagulant-related hemorrhage[all were minor . One patient had a thromboembolic episode[permanent ,and 2 had late prosthetic valve endocarditis. There was no clinical evidence of hemolysis and structural failure of valves used. Of those patients who survived,NYHA functional class improved significantly[from 87.2% class III & IV before to 95.8% class I & II after . Linearized rates for thromboembolism and anticoagulant-related hemorrhage,and for prosthetic valve endocarditis were 0.67%/100 patient-years,2.95%/100 patient-years,1.34%/100 patient-years, respectively. The actuarial estimates of incidence free of all complications and valve-related deaths were 92.2%/patient-years.Despites the advanced heart disease involving two or more native valves, the patients who had multiple valve replacement had very good results, over a 9-year period.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2322-2328
• /
• 2010

A multiple solid-phase extraction (SPE) method was used with liquid chromatography, coupled with mass spectrometry (LC/MS), for the analysis of heterocyclic amines (HCAs) in human urine. Separation efficiencies based on the pH of the mobile phase and the types of columns were compared. An amide column showed better baseline separation and narrower HCA peak widths at pH 5.0 for the mobile phase than a $C_8$ column. Each SPE step, HLB, MCX, and HybridSPE, was optimized by controlling the pH conditions. The combined method with the three SPEs effectively removed interfering species that cause ion-suppression during HCA detection. Validation of the method, performed with SIM and SRM detection, showed correlation coefficients above 0.991 in the range 0.3 - 16.7 ng/mL. Recovery rates were 45.4 - 97.3% on the $C_8$ column and 71.8 - 101.4% on the amide column, and method detection limits were 0.11 - 0.65 ng/mL on the $C_8$ column and 0.12 - 0.48 ng/mL on the amide column. This method using multiple SPEs offers significant benefits for high-throughput determination of HCAs in urine.

• Journal of Environmental Health Sciences
• /
• v.16 no.2
• /
• pp.11-20
• /
• 1990

To investigate ionic characteristics of acid rain by the succeeding rainfall. bulk precipitation was collected every each 5mm rainfall from march to october 1990 at Dae Jeon area. pH, sulfate nitrate, chloride, ammonium ion was measured and analyzed. The result was as follows: 1. The weighted average pH of rain was 5.1$\pm$ 0.72(4.15~7.6) and rain pH less than 5.5 was appeared 51.3% 2. Average ion concentrations of sulfate, nitrate, chloride and ammonium ion was 125.12 $\mu$eq/l, 62.38 $\mu$eq/l, 31.95 $\mu$eq/l, 66.6 $\mu$eq/l and rates of each anions was 57%, 28.4%, 14.6% and rate of sulfate by nitrate was 2 times. 3. There is no correlations time interval of rainfall and Ion concentration change. 4. From initial to 15mm rainfall, each ion concentrations were decreased. and average concentration of pH, SO$^{-2}_{4}$, Cl ion concentration was increased in the succeeding rainfall 5. Only sulfate ion was correlated by the simple regression analysis with pH except NO$^{-}_{3}$, Cl$^{-}$ and NH$_{4}^{+}$ Cl$^{-}$ correlation coefficient was very high at the multiple regression analysis with pH. 6. Simple & multiple correlation coefficient among anions and NH$^{+}_{4}$ was very high especially N$^{+}_{4}$ and SO$^{2-}_{4}$ at simple regression analysis and SO$^{-2}_{4}$ and NO$_{3}^{-}$, Cl$^{-}$, NH$_{4}^{-}$ at multiple regression analysis.