• 한국수자원학회논문집
• /
• 제48권10호
• /
• pp.869-877
• /
• 2015

해수침투 방지나 대수층 인공함양을 위하여 다수의 관정을 통하여 대수층으로 물을 주입하는 공법이 있다. 이러한 공법의 경우 소기의 목적을 달성하기 위해서는 관정의 위치와 주입량, 그리고 결과되는 관정의 지하수위 등이 별도의 지하수 모델링을 통하여 결정된다. 주입수는 통상 관망을 통하여 관정으로 공급되는 데 이 때 관망에는 관정별 주입량을 조절하기 위한 밸브가 설치된다. 본 연구에서는 다수의 주입 관정이 연결된 관망에서 사전에 산정된 주입량 분포를 준수하기 위한 밸브 개도와 주입관망 가동에 필요한 펌프 최소 소요양정 산정방안을 제시하였다. 본 연구결과는 주입군정 운영의 정밀도를 향상시키는 데 기여할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.534-539
• /
• 2001

An experimental investigation of heat transfer characteristics on confined jet impinging plate using multiple slot jets has been performed. The effects of jet Reynolds numbers(Re=2000, 3950, 5900, 7900), dimensionlesss slot-to-plate distances(H/B=2, 4, 6, 8) and jet-to-jet distances(S=16B, 20B, 24B, 30B) on the local and average heat transfer coefficients have been examined. To clarify local heat transfer characteristics, naphthalene sublimation technique were used. From the experimental results, it was found that the local and average heat transfer rates increase with increasing jet Reynolds number. Measurements of local heat transfer coefficients produced by multiple of slot jets have given an indication of the nature of the interaction between jets and of the uniformity of heat transfer obtainable with various arrangements. At S/B=20, Re=7900 and H/B=6, maximum average Nusselt number is obtained.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2406-2412
• /
• 2015

Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4^th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.

• 한국통신학회논문지
• /
• 제29권6A호
• /
• pp.640-650
• /
• 2004

본 논문에서는 Multiple Put-Multiple output Orthogonal Frequency Division Multiplexing(MIMO-OFDM) 시스템을 위한 채널 추정 기법으로 space-time block c첨ing(STBC) 기법과 space-frequency block coding(SFBC) 기법을 제안한다. 제안된 방식은 각 송신 안테나에서 서로 직교성을 갖는 훈련 심볼을 전송함으로써 수신 안테나에서는 각 송수신 안테나 사인의 채널 계수를 추정한다. 제안된 알고리즘은 IEEE 802.11a 시스템 기반의 MIMO-OFDM 시스템에 적용해 성능 개선 효과를 확인해 보았다. 그 결과 제안된 방법이 기존의 방법보다 더 정확한 채별 계수 추정이 가능함을 확인할 수 있었다. 모의실험은 기존의 추정기법과 제안된 추정 기법이 적용된 시스템을 50ns 와 150ns 의 RMS 지연 확산을 갖는 다중 경로 페이딩 환경에서 수행되었으며 각 변복조 방식에 따른 비트 오류 성능 개선 정도를 확인해 보았다.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.639-644
• /
• 2014

In low-density parity-check (LDPC) coded multiple-input multiple-output (MIMO) communication systems, probabilistic information are exchanged between an LDPC decoder and a MIMO detector. TheMIMO detector has to calculate probabilistic values for each bit which can be very complex. In [1], the authors presented a class of linear block codes named low-density MIMO codes (LDMC) which can reduce the complexity of MIMO detector. However, this code only supports the outer-iterations between the MIMO detector and decoder, but does not support the inner-iterations inside the LDPC decoder. In this paper, a new approach to construct LDMC codes is introduced. The new LDMC codes can be encoded efficiently at the transmitter side and support both of the inner-iterations and outer-iterations at the receiver side. Furthermore they can achieve the design rates and perform very well over MIMO channels.

• 한국통신학회논문지
• /
• 제38A권8호
• /
• pp.712-723
• /
• 2013

근래 전 세계적으로 스마트 폰의 수요가 급증하면서 기존의 3G 표준에 비해 높은 데이터 전송률을 제공하는 long term evolution (LTE) 서비스가 활발히 보급되고 있다. 특히, 이동통신 강국인 우리나라는 LTE의 최신 릴리즈인 LTE-Advanced (LTE-A) 서비스를 최근 시작하였다. 높은 데이터 전송률을 얻기 위한 LTE와 LTE-A 시스템의 핵심기술로 다중입출력 안테나 (multiple-input-multiple-output; MIMO)기술을 들 수 있다. MIMO 기술은 주파수와 전력의 증가 없이 안테나 수에 비례하는 채널용량을 얻을 수 있는 장점으로 큰 주목을 받아왔으며 다양한 측면에서 진화 발전이 이루어지고 있다. 본 논문에서는 단일사용자 MIMO에서 다중사용자 MIMO, 그리고 최근 주목받고 있는 대용량 MIMO까지 MIMO기술의 이론적 배경 및 시스템을 구현하기 위해 필요한 고려사항들을 살펴본다.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.362-369
• /
• 2013

The optimal number of users achieving the maximum sum throughput is analyzed in zero-forcing (ZF) based multiuser multiple-input multiple-output (MIMO) systems with a large number of base station (BS) antennas. By utilizing deterministic ergodic sum rates for the ZF-beam forming (ZF-BF) and ZF-receiver (ZF-R) with a large number of BS antennas [1], [2], we can obtain the ergodic sum throughputs for the ZF-BF and ZF-R for the uplink and downlink frame structures, respectively. Then, we can also formulate and solve the optimization problems maximizing the ergodic sum throughputs with respect to the number of users. This paper shows that the approximate downlink sum throughput for the ZF-BF is a concave function and the approximate uplink sum throughput for the ZF-R is also a concave function in a feasible range with respect to the number of users. The simulation results verify the analyses and show that the derived numbers of users provide the maximum sum throughputs for the ZF-BF as well as ZF-R in multiuser MIMO systems with a large number of BS antennas.

• 통합자연과학논문집
• /
• 제11권4호
• /
• pp.197-203
• /
• 2018

Long Term Evolution-Advanced (LTE-A) is the next drive in the broadband mobile communication, which allows operators to improve networks performance and service capabilities. LTE-A targets the peak data rates of 1Gbps in the downlink and 500Mbps in the uplink. This requirement is only fulfilled by a transmission bandwidth of up to 100MHz. However the accessibility of such large part of the contiguous spectrum is uncommon in practice. Therefore LTE-A uses some new features on top of the existing LTE standards to provide very high data rate transmission. Some of the most significant features introduced in LTE-A are carrier aggregation, heterogeneous network enhancement, coordinated multipoint transmission and reception, enhanced multiple input and multiple output, and development relay nodes with universal frequency reuse. This review paper presents an overview of the above mentioned LTE-A key features and functionalities. Based on this review, in the conclusion we discuss the current technical challenges for future broadband mobile communication systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.280-294
• /
• 2023

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.

• 보건행정학회지
• /
• 제16권2호
• /
• pp.49-76
• /
• 2006

The aim of this study was to explore the effects of a computerized review program which was introduced in August 1, 2003, using claims data for acute respiratory infection related diseases. National Health Insurance (NHI) claims data on respiratory infection related diseases before and after the introduction, with six month intervals respectively, were used for the analysis. Clinic was the unit of observation, and clinics with only one physician whose specialty was internal medicine, pediatrics, otorhinolaryngology and family medicine and clinics with a general practitioner were selected. The final sample had 7,637 clinics in total. Indices used to measure practice pattern was prescription rates of antibiotics, prescription rates of injection drug per visit, treatment costs per claim, and total costs per claim. Changes in the number of claims for major disease categories and upcoding index for disease categories were used to measure claiming behavior. Data were analysed using descriptive analysis, t-test for indices changes before and after the introduction, analysis of variance (ANOVA) for practice pattern change for major disease categories, and multiple regression analysis to identify whether new system influenced on provider' practice patterns or not. Prescription of antibiotics, prescription rates of injection drug, treatment costs per claim, and total costs per claim decreased significantly. Results from multiple regression analysis showed that a computerized review system had effects on all the indices measuring behavior. Introduction of the new system had the spillover effects on the provider's behavior in the related disease categories in addition to the effects in the target diseases, but the magnitude of the effects were bigger among the target diseases. Rates of claims for computerized review over total claims for respiratory diseases significantly decreased after the introduction of a computerized review system and rates of claims for non target diseases increased, which was also statistically significant. Distribution of the number of claims by disease categories after the introduction of a computerized review system changed so as to increase the costs per claims. Analysis of upcoding index showed index for 'other acute lower respiratory infection (J20-22)', which was included in the review target, decreased and 'otitis media (H65, H66)', which was not included in the review target, increase. Factors affecting provider's practice patterns should be taken into consideration when policies on claims review method and behavior changes. It is critical to include strategies to decrease the variations among providers.