• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.116-125
• /
• 2014

In this paper, we investigate an inventory and production system in a three-layer supply chain system involving a single supplier, single manufacturer and multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce single item, but we consider raw materials in order to produce multiple items. It is assumed that the cycle time at each stage is an integer multiple of the adjacent downstream stage. We develop an iterative solution procedure to find the order quantity for the multiple items and raw materials that minimizes the supply chain-wide total cost per unit time of the supplier and manufacturer's raw materials ordering and holding, setup and finished items holding, the retailer's ordering and inventory holding. Numerical examples are presented to show that the proposed heuristic gives good performance.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.7-14
• /
• 2023

We investigated the effect of multiple tempering on the microstructure and mechanical properties of AISI 4340 steel. The austenitized and quenched AISI 4340 steels were tempered at 550, 600, and 650℃ for 1, 2, and 4 h by single-tempering (ST). The multiple tempering was conducted for 4 h by double-tempering (DT, 2 h + 2 h), and quadruple-tempering (QT, 1 h + 1 h + 1 h + 1 h). As tempering temperature increases, yield strength and ultimate tensile strength decrease and elongation increases due to recovery and recrystallization of martensite and coarsening of carbides. At 550℃, as the number of tempering cycles increases, the yield strength and tensile strength decrease at the expense of fracture elongation. At 600 and 650℃, the yield strength and tensile strength increase with increasing the number of tempering cycles while fracture elongation maintains similar values. The multiple tempering at the same tempering time of 4 h improves the modulus of toughness at all tempering temperatures, which is presumed to be due to the change in carbide precipitation behavior by multiple tempering.

• The Journal of the Acoustical Society of Korea
• /
• 제23권2E호
• /
• pp.44-50
• /
• 2004

A theoretical formula that is based on the geometrical theory of diffraction (GTD) is proposed for computing sound diffraction by multiple wedges, barriers, and polygonal-like shapes. The formula can treat both convex and concave edges, where edges mayor may not be inter-connected. Comparisons of theoretical predictions with other results done by the BEM or experiments for scaled model confirm the accuracy of the present formula. Numerical examples such as double wedges and doubly inclined barrier show that when there exist several diffraction paths for given source and receiver positions, the insertion loss is dominated by the diffraction associated with the shortest propagation path.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.403-411
• /
• 2008

Zr-based amorphous alloy matrix composites reinforced with tantalum continuous fibers were fabricated by liquid pressing process, and their microstructures and mechanical properties were investigated. About 60 vol.% of tantalum fibers were homogeneously distributed inside the amorphous matrix, which contained a small amount of polygonal crystalline particles. The ductility of the tantalum-continuous-fiber-reinforced composite under tensile or compressive loading was dramatically improved over that of the monolithic amorphous alloy, while maintaining high strength. The consequential observation of the tensile deformation and fracture behavior of the composite showed the formation of multiple shear bands and multiple necking, crack deflection in the amorphous matrix, and obstruction of crack propagation by ductile fibers, thereby resulting in very high tensile elongation of 7.2%. These findings suggested that the liquid pressing process was useful for the development of amorphous matrix composites with improved ductility.

• Applied Microscopy
• /
• 제42권3호
• /
• pp.151-157
• /
• 2012

The microstructure of various shapes of stacking fault pyramids (SFPs) formed in multiple implant/anneal Separation by Implanted Oxygen (SIMOX) material were investigated by plan-view and cross-sectional transmission electron microscopy. In the multiple implant/anneal SIMOX, the defects in the top silicon layer are confined at the interface of the buried oxide layer at a density of ${\sim}10^6\;cm^{-2}$. The dominant defects are perfect and imperfect SFPs. The perfect SFPs were formed by the expansion and interaction of four dissociated dislocations on the {111} pyramidal planes. The imperfect SFPs show various shapes of SFPs, including I-, L-, and Y-shapes. The shape of imperfect SFPs may depend on the number of dissociated dislocations bounded to the top of the pyramid and the interaction of Shockley partial dislocations at each edge of {111} pyramidal planes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.896-901
• /
• 2002

The sound absorption coefficients for multiple layer perforated plate systems containing several compartments with airspaces and porous absorbing materials are estimated using the transfer matrix method developed in the previous paper. The absorption coefficients from transfer matrix method agree well with the values measured by the two-microphone impedance tube method for various combinations of perforated plates, airspaces or porous materials. Based on these results, a guidance for the design of multiple layer perforated plate systems combined with airspaces and porous absorbing materials is discussed in detail.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.781-789
• /
• 2019

The prediction of Jominy hardness curves and the effect of alloying elements on the hardenability of boron steels (19 different steels) are investigated using multiple regression analysis. To evaluate the hardenability of boron steels, Jominy end quenching tests are performed. Regardless of the alloy type, lath martensite structure is observed at the quenching end, and ferrite and pearlite structures are detected in the core. Some bainite microstructure also appears in areas where hardness is sharply reduced. Through multiple regression analysis method, the average multiplying factor (regression coefficient) for each alloying element is derived. As a result, B is found to be 6308.6, C is 71.5, Si is 59.4, Mn is 25.5, Ti is 13.8, and Cr is 24.5. The valid concentration ranges of the main alloying elements are 19 ppm < B < 28 ppm, 0.17 < C < 0.27 wt%, 0.19 < Si < 0.30 wt%, 0.75 < Mn < 1.15 wt%, 0.15 < Cr < 0.82 wt%, and 3 < N < 7 ppm. It is possible to predict changes of hardenability and hardness curves based on the above method. In the validation results of the multiple regression analysis, it is confirmed that the measured hardness values are within the error range of the predicted curves, regardless of alloy type.

• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.471-477
• /
• 2007

본 논문은 전자파 장해 및 복사 내성 측정의 대용 시험 시설로서 활용될 수 있는, 다중 유전체로 구성된 평탄형 QRD(Quadratic Residue Diffuser)를 사용한 전자파 잔향실에 대한 연구이다. 잔향실은 $2.5{\sim}3$ GHz 대역에서 사용 가능하도록 설계되었으며, 기존 QRD의 특성을, 다양한 유전체를 이용하여 낮은 평탄형 구조물로 구현하였고, 이를 적용한 전자파 잔향실 내부에서의 전자기장 특성 변화 및 시험 공간 확장에 관해서 비교 분석하였다. 잔향실 내부의 전자기장 분포 해석을 위해서 FDTD(Finite-Difference Time-Domain) 수치 해석 방식을 이용하였다. 잔향실 내에 새로 제안된 확산기를 사용하면, 기존 확산기에 비해 물리적인 크기가 줄어들 뿐만 아니라 전자기장 균일도, 편파 특성 및 공차 등의 성능이 비슷하거나 우수해짐을 확인하였다. 따라서 다중 유전체로 구성된 평탄형 확산기를 사용한 잔향실이 기존의 QRD를 사용한 잔향실에 비해 전자기적 성능 및 공간 활용면에서 우수한 시험시설임을 확인하였다.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.381-386
• /
• 2009

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wettype multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are dvanced in durability and braking power, and can be designed compactly. Thus, we adesigned and made wettype multiple disk brakes of axle for the wheel excavator to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 3 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient on temperature of oil and applied pressure.

• 한국진공학회지
• /
• 제15권3호
• /
• pp.241-245
• /
• 2006

본 연구에서는 대면적 플라즈마 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위하여 기존의 내장형 serpentine-type 안테나와 새롭게 고안된 내장형 유도결합형 multiple U-Type 안테나를 1020mm X 920mm(기판 880 X 660mm)의 챔버에서 연구하였다. 내장형 유도결합형 multiple U-type을 적용한 플라즈마는 serpentine-type과 비교하여 더 높은 플라즈마 밀도, 높은 radical 밀도, 좋은 균일도를 관찰할 수 있었다. 이는 serpentine-type의 경우와 비교하여 보다 적은 정상파 효과와 높은 유도결합에 기인한다. 내장형 유도결합형 multiple U-type 안테나의 적용으로 $2\times10^{11}/cm^3$의 높은 플라즈마 밀도를 얻을 수 있었고 5000W의 입력전압과 Ar 가스 15mTorr 공정압력조건에서 4%의 균일도를 관찰할 수 있었다.