• Journal of KIBIM
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2021

Comparing to general scanning data, the 3D digital map for large construction sites and complex buildings consists of millions of points. The large construction site needs to be scanned multiple times by drone photogrammetry or terrestrial laser scanner (TLS) survey. The scanned point cloud data are required to be registrated with high resolution and high point density. Unlike the registration of 2D data, the matrix of translation and rotation are used for registration of 3D point cloud data. Archiving high accuracy with 3D point cloud data is not easy due to 3D Cartesian coordinate system. Therefore, in this study, iterative closest point (ICP) registration method for improve accuracy of 3D digital map was employed by different overlap ratio on 3D digital maps. This study conducted the accuracy test using different overlap ratios of two digital maps from 10% to 100%. The results of the accuracy test presented the optimal overlap ratios for an ICP registration method on digital maps.

• Structural Engineering and Mechanics
• /
• v.80 no.5
• /
• pp.563-583
• /
• 2021

Composite materials, composed of multiple constituent materials with dissimilar properties, are actively adopted in a wide range of industrial sectors due to their remarkable strength-to-weight and stiffness-to-weight ratio. Nevertheless, the failure mechanism of composite materials is highly complicated due to their sophisticated microstructure, making it much harder to predict their residual material lives in real life applications. A promising solution for this safety issue is structural damage detection. In the present paper, damage detection of composite material via electrical resistance-based technique and infrared thermography is reviewed. The operating principles of the two damage detection methodologies are introduced, and some research advances of each techniques are covered. The advancement of IR thermography-based non-destructive technique (NDT) including optical thermography, laser thermography and eddy current thermography will be reported, as well as the electrical impedance tomography (EIT) which is a technology increasingly drawing attentions in the field of electrical resistance-based damage detection. A brief comparison of the two methodologies based on each of their strengths and limitations is carried out, and a recent research update regarding the coupling of the two techniques for improved damage detection in composite materials will be discussed.

• Tuberculosis and Respiratory Diseases
• /
• v.86 no.4
• /
• pp.245-250
• /
• 2023

The healing process of tracheobronchial tuberculosis (TB) results in tracheobronchial fibrosis causing airway stenosis in 11% to 42% of patients. In Korea, where pulmonary TB is still prevalent, post-TB tracheobronchial stenosis (PTTS) is one of the main causes of benign airway stenosis causing progressive dyspnea, hypoxemia, and often life-threatening respiratory insufficiency. The development of rigid bronchoscopy replaced surgical management 30 years ago, and nowadays PTTS is mainly managed by bronchoscopic intervention in Korea. Similar to pulmonary TB, tracheobronchial TB is treated with combination of anti-TB medications. The indication of rigid bronchoscopy is more than American Thoracic Society (ATS) grade 3 dyspnea in PTTS patients. First, the narrowed airway is dilated by multiple techniques including ballooning, laser resection, and bougienation under general anesthesia. Then, most of the patients need silicone stenting to maintain the patency of dilated airway; 1.5 to 2 years after indwelling, the stent could be removed, this has shown a 70% success rate. Acute complications without mortality develop in less than 10% of patients. Subgroup analysis showed successful removal of the stent was significantly associated with male sex, young age, good baseline lung function and absence of complete one lobe collapse. In conclusion, rigid bronchoscopy could be applied to PTTS patients with acceptable efficacy and tolerable safety.

• Electronics and Telecommunications Trends
• /
• v.39 no.5
• /
• pp.61-73
• /
• 2024

Quantum information technology is driving innovative computing, communication, and sensing advancements. High-performance tunable lasers have become essential tools for precisely controlling and manipulating qubits. These lasers provide high stability and accuracy at specific wavelengths, enabling efficient control of various types of qubit systems, such as ions, neutral atoms, and defects. High-performance tunable lasers allow the initialization of qubit states, execution of quantum gate operations, and minimization of errors during the readout process. In addition, tunable lasers are critical in precisely regulating the interactions between multiple qubits to optimize quantum entanglement and correlation. This study explores the existing and state-of-the-art technologies related to the design and implementation of high-performance tunable lasers in the visible and near-infrared wavelength ranges that are crucial for key material systems used in quantum technology. Based on this investigation, we present new methodologies for maximizing the scalability of qubit control. These laser technologies are expected to contribute to the commercialization and performance enhancement of quantum information technology, a common foundational technology.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.221-228
• /
• 2020

Ochrobactrum anthropi is a non-fermentative oxidative gram-negative bacillus that produces oxidase. Distinguishing a mixed culture with non-fermenting bacteria having a similar appearance and oxidase-positive is difficult, and there is a limit to accurate identification with a biochemical identification system. This paper proposes that the Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Platform (MALDI-TOF) method is useful for classifying bacteria that are difficult to identify using biochemical testing methods. As a result of analyzing five cases of O. anthropi examined using MicroScan, it took 6.5 days to the final report, which was 3.5 days more than the 3.0 days of E. coli. The pus sample in patient 5 was a mixed infection with Achromobacter xylosoxidans, and it took 11.3 days because of multiple subculture and retests. Four patients were over 60 years old with an underlying disease, and the possibility of opportunistic and nosocomial infections could not be excluded. Among them, samples collected after 92 days of hospitalization were resistant to imipenem and meropenem. Therefore, an examination using the MALDI-TOF method will be useful for the rapid and adequate treatment of patients with difficult identification, such as O. anthropi.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.99-109
• /
• 2018

The precision of the vibration-sensors, contact or non-contact types, is usually satisfactory for the practical measurement applications, but a sensor is confined to the measurement of a point or a direction. Although the precision and frequency span of the low-cost camera are inferior to these sensors, it has the merits in the cost and in the capability of simultaneous measurement of a large vibrating area. Furthermore, a camera can measure multi-degrees-of-freedom of a vibrating object simultaneously. In this study, the calibration method and the dynamic characteristics of the low-cost machine vision camera as a sensor are studied with a demonstrating example of the two-dimensional vibration of a cantilever beam. The planar image of the camera shot reveals two rectilinear and one rotational motion. The rectilinear vibration motion of a single point is first measured using a camera and the camera is experimentally calibrated by calculating error referencing the LDV (Laser Doppler Vibrometer) measurement. Then, by measuring the motion of multiple points at once, the rotational vibration motion and the whole vibration motion of the cantilever beam are measured. The whole vibration motion of the cantilever beam is analyzed both in time and frequency domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1134-1141
• /
• 1999

In this paper, we implement an optical code division multiple access(OCDMA) system and analyze the performance of the implemented system. In the implemented system, a transmitter encodes input data into optical pulses by using laser diode, and spreads the encoded pulses in an encoder which consists of 4 stage delay lines. The decoder which is the same structure as that of encoder delays and combines the spreaded pulses, and thus recovers the original data. At first, we discuss the auto- and cross-correlations of OCDMA signals under both environments of single user and multi-users, and then verify the simulation results with experimental results. We also evaluate the effect of a number of stages of delay line and code length on the system performance through computer simulations. As experimental results we can see that if the decoder have the same configuration as that of encoder, the peak auto-correlation characteristics can be achieved, and thus we can recover the original data from received data. As simulation results we can see that although bit error rate decreases as code length decreases or the number of stage of delay line increases, it is difficult to implement the system because the pulse width becomes narrow. From the results, we can apply CDMA technologies to optical communication networks.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.488-493
• /
• 2012

Hemangioma and vascular malformation are the most common benign tumors that are caused by congenitally or traumatic events. Theses tumors represent approximately 1/3~1/4 of all hemangiomas and vascular malformations in the head and neck. There are many forms of treatment for hemangioma and vascular malformation including closed observation, surgery, radiotherapy, laser therapy, steroid therapy, compression, embolization, and sclerotherapy. Ethanolamine oleate is an unsaturated fatty acid salt that has been used as a sclerosing agent because of its excellent thrombosing properties. This paper presents 1 case of intraoral multiple venous malformations treatment with 1.25% ethanolamine oleate (3.6~9.6 mg dose) intralesionally injected for 6 to 14 weeks over 2 week intervals. After the sclerotherapy, lesions almost completely disappeared without side effects. In conclusion, sclerotherapy using ethanolamine oleate is very effective against venous malformations, and sufficiently provides alternative support for surgical and other methods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.10
• /
• pp.345-352
• /
• 2022

Recent LiDAR(Light Detection And Ranging) sensor is used for scanning object around in real-time. This sensor can detect movement of the object and how it has changed. As the production cost of the sensors has been decreased, LiDAR begins to be used for various industries such as facility guard, smart city and self-driving car. However, LiDAR has a large input data size due to its real-time scanning process. So another way for processing a large amount of data are needed in LiDAR system because it can cause a bottleneck. This paper proposes edge computing to compress massive point cloud for processing quickly. Since laser's reflection range of LiDAR sensor is limited, multiple LiDAR should be used to scan a large area. In this reason multiple LiDAR sensor's data should be processed at once to detect or recognize object in real-time. Edge computer compress point cloud efficiently to accelerate data processing and decompress every data in the main cloud in real-time. In this way user can control LiDAR sensor in the main system without any bottleneck. The system we suggest solves the bottleneck which was problem on the cloud based method by applying edge computing service.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.3
• /
• pp.279-284
• /
• 2006

A multiple primary malignant tumor is a disease mainly encountered in the of the older age groups. Attempts should be made to rule out a second primary malignant neoplasm in the elderly patients with unusual signs and symptoms. We encountered a case of a 67-year-old male with triple primary malignant tumors of the stomach, larynx, and lung. The patient had been treated with a subtotal gastrectomy for early gastric cancer in 1991 and a Laser laryngectomy for the laryngeal squamous cell carcinoma in 2003. In 2005, lung cancer was found with the biopsy revealing an adenosquamous carcinoma. Systemic chemotherapy was performed.