• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.302-308
• /
• 2011

In this paper we propose a coordinated beamforming(CBF) scheme considering the effects of feedback quantization and delay in time-varying multiple-input multiple-output(MIMO) broadcast channels. By equal power allocation per data stream, the proposed CBF scheme transmits multiple data streams per user terminals without additional feedback overhead when quantized feedback information is used. The proposed CBF scheme also applies a linear channel predictor to each user terminals to prevent errors due to feedback delays that are not evitable in practical wireless systems. Each user terminal utilizes Wiener filter to predict future channel responses and generates feedback information based on the predicted channels. Consequently the proposed CBF scheme adapting Wiener filter improves system performances compared with the conventional scheme using delayed feedback.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.397-401
• /
• 1994

This paper proposes an identification method for a thin plate where multiple actuators and sensors are bonded. Since a thin plate has small damping ratios of all modes, each mode can be identified seperately with a bandpass filter for each modal signal. With the bandpass filter and the characteristics of the plate, the Multi-Input Multi-Output (MIMO) model of the plate can be converted to several Multi-Input Single-Output(MISO) models of second order linear difference equations of the modes. Parameters for each mode are obtained by using the Least Square method. Form there MISO models, the MIMO model is obtained in the form of the state space. Experiments were performed for an all-clamped plate with two pairs of piezoelectric actuators and sensors. The outputs of the identified model and the experimental data match well.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.952-962
• /
• 2023

In this study, a space-time transmission scheme is proposed to tackle the limitations of channel estimation with orthogonal pilot information in colocated multiple-input multiple-output systems with several transmitting and receiving antennas. Channel information is obtained using orthogonal pilots. Channel estimation introduces pilot heads required to estimate a channel. This leads to bandwidth insufficiency. As a result, trade-offs exist between the number of pilots required to estimate a channel versus spectral efficiency. The detection of data symbols is performed using the maximum likelihood decoding method as it provides a consistent approach to parameter estimation problems. The moment-generating function of the instantaneous signal-to-noise ratio is used to drive an approximate expression of the symbol error rate for the proposed scheme. Furthermore, the order of diversity is less by one than the number of receiver antennas used in the proposed scheme. The effect of the length of a pilot sequence on the proposed scheme's performance is also investigated.

• Journal of Integrative Natural Science
• /
• v.13 no.2
• /
• pp.69-75
• /
• 2020

Multiple Input Multiple Output (MIMO) is one of the important wireless communication technologies. This paper proposes MIMO system capacity enhancement by using convolution of periodic circulating vector signals. This signal represents statistical dependencies between transmission signal with discrete noise and receiver signal with the linear shifting of MIMO channel capacity by positive extents. We examine the channel capacity, outage probability and SNR of MIMO receiver by adding log determinant signal with validated in terms of numerical simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1534-1542
• /
• 2009

In this paper we achieve experimental data evaluation using SSB(Single-side band) modulation in the ocean. Present research in underwater communication is applying digital modulation, OFDM(Orthogonal Frequency Division Modulation) and MIMO(Multiple Input Multiple Output) system. However, Commercial modems using analog modulation techniques in oceans. So, we achieved experimental for modem appliance development of correct high quality in South Korea sea characteristics. This experimets achievd useing SSB analog modulation in Jin-hae shore of shallow water condition. We analyzed Doppler effects, reverberation and transmission characteristics for real channel effect analysis. As a result, reverberation and ships self-noise are disturbed factors for underwater communications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1827-1832
• /
• 2014

In this thesis, we use one by one each of the analog switch and a high-speed DAC instead of the DAC that two or more are used in transmitting and receiving antennas multiple systems, maintaining the advantages of the existing method, reducing design costs, physical to provide a method that can reduce the data converters from MIMO system can improve the economic efficiency and the size reduction of a basis.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.289-294
• /
• 2017

A high-performance time-division multiplexing (TDM) -based multiuser (MU) multiple-input multipleoutput (MIMO) system for efficient indoor visible-light communication (VLC) is presented. In this work, a MIMO technique based on RGB light-emitting diodes (LEDs) with selection combining (SC) is utilized for data transmission. That is, the proposed scheme employs RGB LEDs for parallel transmission of user data and transmits MU data in predefined slots of a time frame with a simple and efficient design, to schedule the transmission times for multiple users. Simulation results demonstrate that the proposed scheme offers an approximately 6 dB gain in signal-to-noise ratio (SNR) at a bit error rate (BER) of $3{\times}10^{-5}$, as compared to conventional MU single-input single-output (SISO) systems. Moreover, a data rate of 66.7 Mbps/user at a BER of $10^{-3}$ is achieved for 10 users in indoor VLC environments.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.27-37
• /
• 2022

In this paper, we presents a Multiple User Multiple Input Multiple Output (MU-MIMO) test-bed system for Time Division Duplex (TDD) Long Term Evolution-Advanced (LTE-A). Using two parameters, the condition number of the channel matrix and the path gain, the MU-MIMO system could switch pre-coder to maintain target Bit Error Rate (BER) level. This paper also introduces a calibration procedure for compensating error of Radio Frequency (RF) paths of the antennas and RF transceivers. From experimental measurements, dynamic pre-coding scheme could maintain target BER, set to 10^-3, with the pre-coder set configured with Zero Forcing (ZF), Tomlinson Harashima Pre-coding (THP), Lattice Reduction (LR). The simplest pre-coder ZF is adopted in stable channel, and when path gain become less than 0.25, LR is adopted. Lastly, when condition number of channel matrix become larger than 7, THP is adopted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.2879-2890
• /
• 2020

In this paper, we study the estimation of angle, range and polarization parameters of a bistatic polarization sensitive frequency diverse array multiple-input multiple-output (PSFDA-MIMO) radar system. The application of polarization sensitive array in receiver is explored. A signal model of bistatic PSFDA-MIMO radar system is established. In order to utilize the multi-dimensional structure of array signals, the matched filtering radar data can be represented by a third-order tensor model. A joint estimation of the direction-of-departure (DOD), direction-of-arrival (DOA), range and polarization parameters based on parallel factor (PARAFAC) algorithm is proposed. The proposed algorithm does not need to search spectral peaks and singular value decomposition, and can obtain automatic pairing estimation. The method was compared with the existing methods, and the results show that the performance of the method is better. Therefore, the accuracy of the parameter estimation is further improved.

• ETRI Journal
• /
• v.46 no.2
• /
• pp.184-193
• /
• 2024

This paper presents the performance evaluation of an amplify-and-forward (AF) relay-assisted multiuser multiple input-multiple output (MU-MIMO) downlink transmission system for correlated fading channels. The overall system performance was improved by incorporating a double-quadrature spatial modulation (DQSM) scheme. The bit error rate (BER) performance and detection complexity of the AF-MU-MIMO-DQSM system were analyzed and compared with those of a conventional AF-MU-MIMO system under the same conditions and parameters. The results showed that the correlated fading channel severely affected the performance of systems with higher spectral efficiency (SE). Considering an SE of 12 bpcu/user, the AF-MU-MIMO-DQSM system yielded a gain of up to 3 dB in BER performance compared with that of its conventional counterpart for the analyzed cases. In terms of detection complexity, the AF-MU-MIMO-DQSM system showed a reduction of up to 56 % compared with that of the conventional system for the optimal maximum likelihood detection criterion.