• 제목/요약/키워드: multiple feed

검색결과 190건 처리시간 0.027초

혼합 또는 단일 생균제가 산란계와 육계의 생산성, 소장내 미생물 균총 및 면역 체계에 미치는 영향 (Effects of Supplementary Multiple Probiotics or Single Probiotics on the Performance, Intestinal Microflora, Immune Response of Laying Hens and Broilers)

  • 김찬호;우경천;김근배;박용하;백인기
    • 한국가금학회지
    • /
    • 제37권1호
    • /
    • pp.51-62
    • /
    • 2010
  • 본 연구는 혼합 생균제의 첨가가 산란계와 육계의 생산성과 소장내 미생물, 면역체계에 미치는 영향을 조사하기 위해 실시하였다. 시험 1은 800수의 82주령 산란계(Hy-Line Brown$^{(R)}$)를 5처리로 구성하여 실시하였다. 각각의 처리는 대조구, 항생제구(avilamycin 6 ppm), 생균제 PB-M(Micro-ferm$^{(R)}$) 0.2%구, PB-L (Lactto-sacc$^{(R)}$) 0.1%구, PB-Y(Y University probiotics) 0.2%구로 구성하여, 8반복 반복당 20수씩 완전 임의 배치하여 자유 섭식케 하였으며, 일반적인 점등 관리(자연 일조+조명= 16 h)를 실시하였다. 시험 2에서는 육계(Ross$^{(R)}$) 1,000수를 공시하여 시험 1과 같은 처리로 구성하여 35일간 전기(0~3주), 후기(4~5주)로 나누어 실시하였으며, 처리당 4반복을 두어 반복당 50수씩 나누어 배치하였다. 시험 1에서는 계란 생산지수들 즉 일계 산란율과 생산지수, 난중, 연파란율, 사료 섭취량, 사료 요구율은 처리구 사이에서 유의적인 차이가 없었다. 강도와 난각 두께는 유의적인 차이가 있었는데, 항생제구와 생균제 처리구에서 증가하는 경향이 있었다. PB-Y구는 난각 강도, 난각 두께, 난각색, 난황색, Haugh unit에서 가장 높았는데 유의한 영향은 미치지 못했다. 시험 2에서는 전기간(0~5주) 증체량 및 폐사율은 처리구 사이에서 유의적인 차이는 없었지만, 0~3주 기간동안 PB-Y의 증체량이 대조구와 항생제구와 비교하여 낮게 나왔다. 전기간(0~5주)에서 항생제구의 사료 섭취량, 생산지수는 가장 높았고, 사료 요구율은 대조구보다 낮게 나왔다. 생균제 처리구들은 대조구와 비교하여 사료 섭취량과 사료 요구율에서는 유의적인 차이가 없었다. 시험 1에서 백혈구 수치 즉, 백혈구, 호중구, 림프구, 단핵구, 호산구, 스트레스지수는 산란계에서 유의적인 차이가 있었다. 항생제구와 생균제구는 모든 수치에서 증가하는 경향을 보였다. 시험 2에서는 오직 스트레스지수에서만 항생제구에서 유의적으로 감소하는 경향을 보였다. 시험 1에서 IgG 농도는 PB-M과 PB-L구에서 유의적으로 증가하였다. E. coli 수는 항생제구, PB-L구, 그리고 PB-Y구에서 유의적으로 감소하였다. 시험 2에서 조지방 이용률이 생균제 처리구에서 유의적으로 감소하였다. 결론적으로 산란계에서는 생균제의 처리구들에서 난각 두께와 강도가 증가하였고, 육계에서는 생산 지수는 증가하고, 사료 요구율은 감소하였다. 백혈구 지수는 산란계에서 항생제와 생균제 처리구에서 증가하는 경향이 있었다. E. coli는 산란계에서 감소하는 경향을 보였으며, 육계에서는 생균제 처리구들이 조지방 이용률에서 감소하는 경향을 보였다. 혈액지수와 소장내 미생물은 육계보다 산란계에서 더 예민하게 반응하는 경향을 보였다.

The effectiveness of step feeding strategies in sequencing batch reactor for a single-stage deammonification of high strength ammonia wastewater

  • Choi, Wonyoung;Yu, Jaecheul;Kim, Jeongmi;Jeong, Soyeon;Direstiyani, Lucky Caesar;Lee, Taeho
    • Membrane and Water Treatment
    • /
    • 제11권1호
    • /
    • pp.79-85
    • /
    • 2020
  • A single-stage deammonification with a sequencing batch reactor (SBR) that simultaneous nitritation, anaerobic ammonia oxidation (anammox), and denitrification (SNAD) occur in one reactor has been widely applied for sidestream of wastewater treatment plant. For the stable and well-balanced SNAD, a feeding strategy of influent wastewater is one of the most important operating factors in the single-stage deammonification SBR. In this study, single-stage deammonification SBR (working volume 30L) was operated to treat a high-strength ammonium wastewater (1200 mg NH4+-N/L) with different feeding strategies (single feeding and nine-step feeding) under the condition without COD. Each cycle of the step feeding involved 6 sub-cycles consisted of aerobic and anoxic periods for partial nitritation (PN) and anammox, respectively. Contrary to unstable performance in the single feeding, the step feeding showed better deammonification performance (0.565 kg-N/m3/day). Under the condition with COD, however, the nitrogen removal rate (NRR) decreased to 0.403 kg-N/m3/day when the Nine-step feeding strategies had an additional denitrification period before sub-cycles for PN and anammox. The NRR was recovered to 0.518 kg-N/m3/day by introducing an enhanced multiple-step feeding strategy. The strategy had 50 cycles consisted of feed, denitrification, PN, and anammox, instead of repeated sub-cycles for PN and anammox. The multiple-step feeding strategy without sub-cycle showed the most stable and excellent deammonification performance: high nitrogen removal efficiency (98.6%), COD removal rate (0.131 kg-COD/m3/day), and COD removal efficiency (78.8%). This seemed to be caused by that the elimination of the sub-cycles might reduce COD oxidation during aerobic condition but increase the COD utilization for denitrification period. In addition, among various sensor values, the ORP pattern appeared to be applicable to monitor and control each reaction step for deammonification in the multiple-step feeding strategy without sub-cycle. Further study to optimize the number of multiple-step feeding is still needed but these results show that the multiple-step feeding strategy can contribute to a well-balanced SNAD for deammonification when treating high-strength ammonium wastewater with COD in the single-stage deammonification SBR.

Immunomodulatory effects of phytogenics in chickens and pigs - A review

  • Huang, C.M.;Lee, T.T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제31권5호
    • /
    • pp.617-627
    • /
    • 2018
  • Environmental stressors like pathogens and toxins may depress the animal immune system through invasion of the gastrointestinal tract (GIT) tract, where they may impair performance and production, as well as lead to increased mortality rates. Therefore, protection of the GIT tract and improving animal health are top priorities in animal production. Being natural-sourced materials, phytochemicals are potential feed additives possessing multiple functions, including: anti-inflammatory, anti-fungal, anti-viral and antioxidative properties. This paper focuses on immunity-related physiological parameters regulated by phytochemicals, such as carvacrol, cinnamaldehyde, curcumin, and thymol; many studies have proven that these phytochemicals can improve animal performance and production. On the molecular level, the impact of inflammatory gene expression on underlying mechanisms was also examined, as were the effects of environmental stimuli and phytochemicals in initiating nuclear factor kappa B and mitogen-activated protein kinases signaling pathways and improving health conditions.

A development of the automated system for adjusting the 6 D.O.F circular fixator

  • Jung, Sang-Gil;Park, Bum-Seok;Sim, Hyung-Joon;Jang, Jae-Ho;Han, Chang-Soo;Han, Jung-Soo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1642-1647
    • /
    • 2004
  • In this article, we present the development of the automated system for adjusting the 6 D.O.F circular fixator. The system includes scheduling software to adjust the Hexapod Circular Fixator (HCF) and an automated strut system with the ability of the multiple synchronized motion. HCF was designed to control a 6 degree-of-freedom Ilizarove fixator and it's mechanism is known as the Stewart Platform. HCF scheduler evaluates each value of altered length of the HCF struts to correct the complex skeletal deformity by using the X-ray data of the patient. The data of HCF scheduler feed into the automated strut system which be able to provide the scheduled adjustment and the automated strut is synchronized by input data.

  • PDF

Minimum-Time Guidance and Control Law for High Maneuvering Missile

  • Yamaoka, Seiji
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제10권1호
    • /
    • pp.46-58
    • /
    • 2009
  • This paper deals with design procedure of online guidance and control law for future missiles that requires agile maneuverability. For the purpose, the missile with high powered side thruster is proposed. The guidance and control law for such missiles is discussed from a point of view of optimal control theory in this paper. Minimum time problem is solved for the approximated system. It is derived that bang- bang control is optimal input from the necessary conditions of optimal solution. Feedback guidance without iterative calculation is useful for actual systems. In this paper. multiple design point method is applied to design feedback gains and feed forward inputs of the guidance and control law. The numerical results show that the proposed guidance and control law has a high -performance for wide-ranging boundary conditions.

제조성 평가를 기반으로 한 비회전형상 부품의 작업준비 및 작업순서 생성 (Setup and Operation Sequence Generation from Manufacturability Evaluation for Prismatic Parts)

  • 최후곤;한정현;강무진
    • 대한산업공학회지
    • /
    • 제31권4호
    • /
    • pp.316-333
    • /
    • 2005
  • Although some successful recognition algorithms have been developed, most of them did emphasize on extracting accurate interpretations without considerations of manufacturability. Evaluating the manufacturability for multiple features leads to produce the machining sequences. In this paper, the A* algorithm guarantees the optimal setup sequences with minimizing the machining cost. Also, tolerances including surface roughness are converted to STEP formats to be utilized for more reliable process plans. Finally, decision tables are used to create the detailed operational sequences based on geometric tolerances and surface roughness. Machining parameters such as feed, depth of cut, and cutting speed for each operation are added to the routing sheet. Windows are presented to show how the entire system works for a sample part.

비선형 회귀분석에 의한 엔드밀 가공조건에 따른 Al7075의 표면정도 예측 (Prediction of Surface Roughness of Al7075 on End-Milling Working Conditions by Non-linear Regression Analysis)

  • 조연상;박흥식
    • Tribology and Lubricants
    • /
    • 제26권6호
    • /
    • pp.329-335
    • /
    • 2010
  • Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination($R^2$) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.

Incremental Forming 기술을 적용한 Damper Case 생산 기술 개발에 관한 연구 (The Study for Development of Damper Case Production Technique using Incremental Forming)

  • 박정호;이태원;정영덕
    • 한국기계가공학회지
    • /
    • 제10권5호
    • /
    • pp.72-78
    • /
    • 2011
  • Currently, for the damper case, the material produced by cast/forge welding is mechanically processed and then the final product is mass-produced. By cutting the cast/forge welded material, the issues of excessive cutting time, multiple process production, and a large amount of chips (40% loss from the original material) arise, causing increased production cost and reduced profitability. Thus, in this study, the incremental forming technology which generates no chips was applied in production. Analysis was excuted for 1st and 2nd works by change of tool diameter and working tool. For this, 3D molding and analysis were executed, which was applied to the processing the result, successful processing could be achieved through a few trials of molding processing according to tool forming and rotation counts.

절삭률-공구수명 특성 곡선을 이용한 고속가공 공정의 최적화에 관한 연구 (Optimization of high-speed machining process using constrained R-T characteristic curve)

  • 최용철;김동우;장윤상;조명우;허영무
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2003년도 추계학술대회
    • /
    • pp.100-105
    • /
    • 2003
  • With the recent development of machining technology, high speed machining process is widely used for-the mold and difficult-to -cut-materials machining since it allows achieving high productivity and surface quality. However, during the high speed machining process, high cutting speed and feed rate can cause abrupt tool life decrease due to rapid rising of the cutting tool temperature. Such situation may cause increase of machining cost. Thus, in this study, developed optimization algorithm is applied to determine optimal machining variables for multiple high speed machining. The R-T characteristic curve for machining economics problems with a linear-lorarithmic tool life model is determined by applying sensitivity analysis. finally, a series of high speed machining experiments are performed to determine the desired optimal machining variables, and the results are analyzed.

  • PDF

디지털 후퇴 유한시간 구간 LQ 최적 윤곽제어시스템 (Digital Receding Time Horizon LQ Optimal Contour Control System)

  • 심영복;이건복
    • 한국공작기계학회논문집
    • /
    • 제15권6호
    • /
    • pp.105-113
    • /
    • 2006
  • This work is concerned with the development of digital contouring controller for multi-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the contouring performance. The optimal control formation includes the contour error explicitly in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring performance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has established the potential of the proposed controller to improve contouring performance.