• 공업화학
• /
• 제22권6호
• /
• pp.627-630
• /
• 2011

본 연구에서는 원료의 직접 주입법과 다양한 탄소수를 갖는 화합물을 이용하여 휘발유와 등유 등의 고급 유분을 생성할 수 있는 상업용 촉매 공정의 반응특성을 평가하고자 하였다. 이를 통하여 순간주입 반응기(spouted bed reactor) 상에서 상용촉매를 사용하여 반응 특성을 평가하였다. 또한 decane과 pentadecane을 이용하여 고정층 반응기와 순간주입 반응기의 특성을 비교하였다. 본 연구 결과, 반응온도 $550^{\circ}C$에서 가장 높은 휘발유 및 등유 수율을 기록하였다. 또한 순간 주입 반응기의 경우 주입량을 분할하여 주입하는 것보다 1회에 주입하는 것이 보다 효과적이었으며, 탄소수가 큰 물질을 사용할수록 반응활성이 증가하였다.

• 한국초지조사료학회지
• /
• 제36권3호
• /
• pp.205-214
• /
• 2016

The objective of this study was to construct a forage rye (FR) dry matter yield (DMY) estimation model based on climate data by locations in South Korea. The data set (n = 549) during 29 years were used. Six optimal climatic variables were selected through stepwise multiple regression analysis with DMY as the response variable. Subsequently, via general linear model, the final model including the six climatic variables and cultivated locations as dummy variables was constructed as follows: DMY = 104.166SGD + 1.454AAT + 147.863MTJ + 59.183PAT150 - 4.693SRF + 45.106SRD - 5230.001 + Location, where SGD was spring growing days, AAT was autumnal accumulated temperature, MTJ was mean temperature in January, PAT150 was period to accumulated temperature 150, SRF was spring rainfall, and SRD was spring rainfall days. The model constructed in this research could explain 24.4 % of the variations in DMY of FR. The homoscedasticity and the assumption that the mean of the residuals were equal to zero was satisfied. The goodness-of-fit of the model was proper based on most scatters of the predicted DMY values fell within the 95% confidence interval.

• 한국초지조사료학회지
• /
• 제36권3호
• /
• pp.223-236
• /
• 2016

The objective of this study was to construct Italian ryegrass (IRG) dry matter yield (DMY) estimation models in South Korea based on climatic data by locations. Obviously, the climatic environment of Jeju Island has great differences with Korean Peninsula. Meanwhile, many data points were from Jeju Island in the prepared data set. Statistically significant differences in both DMY values and climatic variables were observed between south areas of Korean Peninsula and Jeju Island. Therefore, the estimation models were constructed separately for south areas of Korean Peninsula and Jeju Island separately. For south areas of Korean Peninsula, a data set with a sample size of 933 during 26 years was used. Four optimal climatic variables were selected through a stepwise approach of multiple regression analysis with DMY as the response variable. Subsequently, via general linear model, the final model including the selected four climatic variables and cultivated locations as dummy variables was constructed. The model could explain 37.7% of the variations in DMY of IRG in south areas of Korean Peninsula. For Jeju Island, a data set containing 130 data points during 17 years were used in the modeling construction via the stepwise approach of multiple regression analysis. The model constructed in this research could explain 51.0% of the variations in DMY of IRG. For the two models, homoscedasticity and the assumption that the mean of the residuals were equal to zero were satisfied. Meanwhile, the fitness of both models was good based on most scatters of predicted DMY values fell within the 95% confidence interval.

• Journal of Biosystems Engineering
• /
• 제42권2호
• /
• pp.80-85
• /
• 2017

Purpose: In this study, we attempted to analyze, by using a high-speed camera, the cutting shape as a function of cutting speed and feed rate. We compared the differences in cutting shape between domestic and foreign combines. Methods: Experiments were performed using plastic straws, and the results of two combine cutting blades, one from the Daedong Industry and one from Kuboda, were compared. The quality and performances of cutting were measured at three cutting positions: center and 68 cm to the left and right of the center. The feed rates were 0.6 m/s, 1.1 m/s, 1.6 m/s, and the cutting speeds were 600 RPM, 990 RPM, 1,380 RPM. For each speed, the cutting shape was measured three times, and the entire procedure was also repeated three times. Results: In the experiments, the domestic cutting blade achieved better results than the Japanese cutting blade. These results were obtained by studying the combination of feed rate and cutting speed, with the domestic combine attaining approximately 80% performance of the Japanese combine. We believe that additional data analysis is required, obtained from field experiments. Conclusions: The domestic cutting knives achieved better results than the Japanese cutting knives. These results are estimated from experiments conducted with different feed rates and cutting speeds; an in-depth analysis will require experiments in the real field with actual combines and a combination of multiple variables. Repeating the investigation on the length differences, broken and cut angle with various combinations of feed rate and cutting speed, will surely help to find the optimal cutting speed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.976-982
• /
• 2007

This study investigated whether supplemental Cu, Fe, Zn, and Mn are needed in a practical diet for pullets. Four hundred and twenty females of an egg-laying strain (1-d-old, Lohmann Brown Layer) were randomly distributed into 4 groups, consisting of 7 replicates of 15 birds each. During the 18-week experimental period, chicks were given three basal diets in sequence, each with single or multiple Mn, Zn and Cu supplementation to improve the mineral balance gradually. In the Control, no Mn, Zn, and Cu were added; in the single Mn supplemented group (sMn) Mn was added to 120, 60, and 60 mg/kg for 1-6, 7-12, and 13-18 weeks of age, respectively; in the multiple Mn and Zn supplemented group (mMnZn), Mn was added to 180, 90, and 90 mg/kg and Zn was added to 120, 105, and 105 mg/kg for 1-6, 7-12, and 13-18 weeks of age, respectively; in the multiple Mn, Zn, Cu supplemented group (mMnZnCu), Mn, Zn, and Cu were added to the same multiple of basal Fe concentration relative to NRC (1994) recommendations. Energy and protein metabolizability were determined by subtracting energy/protein intake by energy/protein excretion (from both feces and urine) and dividing by energy/protein intake. There were no statistically significant differences between groups in terms of feed intake, final body weight or tibia length throughout the experiment. Optimal growth performance was observed in the Control, while adding trace minerals to basal diets tended to result in decreased productive performance. Protein metabolizability was increased by mMnZn and mMnZnCu treatments, but energy metabolizability was not affected. Concentrations of Mn, Zn, Cu in excreta varied greatly related to dietary content, and the retentions of Cu, Fe, Zn and Mn were all increased due to the improvement of mineral balance. Based on these results, it is suggested that the concentrations of Cu, Fe, Zn and Mn in typical basal diets used in this study were adequate for normal growth for pullets from 1 to 18 weeks of age.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제48권2호
• /
• pp.67-77
• /
• 2024

This study aims to assess the efficacies of exogenous enzymes, derived from invertebrate gut-associated microbes, as feed additives, in reducing volatile organic compound (VOC) emissions using an in vitro pig intestine continuous fermentation system. An in vitro continuous fermentation model was used to simulate a comparable bionic digestion system by co-reacting feed, enzymatic additives (arazyme, mannanase, and xylanase, derived from the gut bacteria of Nephila clavata, Eisenia fetida, and Moechotypa diphysis, respectively), and gastrointestinal microbes, followed by an analysis of their correlations. A significant correlation was observed between exogenous enzyme supplementation and reduced VOC emissions in the fecal phase of continuous fermentation (p < 0.05). The concentration of VOCs decreased by 3.75 and 2.75 ppm in the treatment group following arazyme and multi-enzyme supplementation, respectively, compared to that in the control group (7.83 ppm). In addition, supplementation with arazyme and multiple enzymes significantly affected the microbial composition of each fermentation phase (p < 0.05). In particular, Lactiplantibacillus pentosus and Pediococcus pentosaceus, which changed in abundance according to arazyme or multi-enzyme supplementation, exhibited a positive relationship with VOC emissions. These results suggest that exogenous enzymes derived from invertebrate gut-associated bacteria can be efficiently applied as feed additives, leading to a reduction in VOC emissions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권1호
• /
• pp.97-107
• /
• 2013

The aim of this study was to establish relationships between chemical and physical parameters of wheat with performance and digestibilities of feed components in broiler chickens fed on wheat-based diets. Ninety-four wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolism cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), liveweight gain (LWG) and gain:feed were measured weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, dry matter retention, oil and neutral detergent fibre (NDF) digestibility. At 28 d the birds were humanely killed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal dry matter, starch and protein digestibility. When wheat parameters were correlated with bird performance data, it was found that specific weight was not significantly (p>0.05) related to bird performance. Bird DMI, LWG and gain:feed were best correlated (p<0.05) with the rate of starch digestion, although the coefficients of correlation (r) were still low (0.246 to 0.523). A negative relationship (p<0.01) between AME and total (r = -0.432) and soluble (r = -0.304) non starch polysaccharide (NSP) was observed in this study. Thousand grain weight (TG) was positively correlated with DMI (r = 0.299), LWG (r = 0.343) and gain:feed (r = 0.371). When establishing multiple regression relationships, correlation coefficients greater than 0.8 were achieved for DMI, LWG, gain:feed and ileal crude protein digestibility. However, the economics involved in determining the parameters involved in the regressions make the process impractical.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권1호
• /
• pp.58-68
• /
• 2015

Requirements to control the large decrease in serum calcium (Ca) due to parturition and to increase the feed intake soon after parturition have been well accepted in dairy cows. This study was aimed to investigate the feed intake affected by serum Ca concentration with difructose anhydride (DFA) III supplement in dairy cows soon after parturition. Fourteen transition Holstein cows were divided into DFA and control (CONT) groups within 1 to 5 parity variations in each group. Measurement schedule for an individual cow was from 14 d before parturition to 7 d following parturition. The cows in DFA group were supplied 0.2 kg/head/d of DFA III feed containing 40 g of pure DFA III while the cows in CONT group received no DFA III. Other feeding procedures were the same for all cows in both groups. At parturition (d 0), serum Ca concentration sharply declined in both groups (p<0.05). Time interval for recovery from decreased serum Ca to its normal range (>9.0 mg/dL) tended to be faster in DFA group (12 h) than in the CONT group (48 h), but the differences were not significant. Active ruminal contraction was observed in DFA group at following parturition of d 1 (p<0.05), d 3 (p<0.05), and d 5 (p<0.01). Dry matter (DM) intake did not differ between the groups. However, positive correlations were observed between serum Ca concentration and ruminal contraction (p<0.001), and between ruminal contraction and DM intake (p<0.001) during following parturition. According to multiple regression analysis ($R^2$ = 0.824, p<0.001), the DM intake was positively affected by serum Ca concentration and ruminal contraction. These results suggest that feed intake soon after parturition in dairy cows can be increased by improvement of serum Ca concentration and active ruminal contraction, but DFA III supplementation in this study did not improve the lower serum Ca concentration due to parturition.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.96-102
• /
• 2002

This study is on the estimation method of toot temperature for different tool nose radius and cutting conditions in turning. Experimental analysis has been performed in different cutting conditions such as cutting speed, feed rate, and depth of cut for the tool nose radius, 0.4R, 0.8R using SMC workpiece materials. Tool temperature is measured using a thermo-couple which is embedded in the insert tip. Using multiple linear regression method, the tool temperature can be determined as an exponential equation with cutting variables and tool nose diameters for the different tool materials. The equations determined in this study show a good correlation for the cutting conditions and can be used for a tool temperature estimation technique. The result indicates that the tool temperature decreases for increasing the tool nose radius in general. Also, nose radius hardly influences on the tool temperature compared with cutting speed, feed rate and depth of cut. This method will be useful for the estimation of tool life and temperature using limited experimental data for given cutting conditions.

• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.1050-1055
• /
• 2010

본 논문에서는 어레이 안테나를 구성하는 각 패치 안테나의 입력 임피던스가 비 균일하게 구성되어 있는 K 밴드(24.15 GHz) $3{\times}6$ 어레이 안테나를 제안하였다. 각 패치 안테나의 임피던스를 조절하기 위해 인셋 급전의 길이를 다르게 함으로써 설계하였다. 또한, 키르히호프 법칙에 의하여 각 패치에 동일한 전류를 인가시켰다. 제안된 비 균일 어레이 안테나의 대역폭은 균일 어레이 안테나의 대역폭보다 1.5배 넓음을 확인하였다. 이는 비균일 임피던스 어레이 안테나를 구성하는 각 패치의 인셋 급전의 길이가 다르기 때문에 다중 공진을 형성하여 대역폭이 넓어지는 것이라 사료된다. 제안된 비 균일 어레이 안테나의 대역폭은 5.07 %, 이득은 18.32 dBi로 측정되었다.