• IE interfaces
• /
• v.24 no.4
• /
• pp.362-372
• /
• 2011

Container pick-up scheduling problem is to minimize the total container handling time, which consists of the traveling distance and the setup time of yard cranes in a container yard. Yard cranes have to pick-up the containers which are stacked in the yard-bays to satisfy the work schedule requirement of quay crane, which loads and unloads containers on or from container ships. This paper allows the movement of multiple yard cranes among storage blocks. A mixed integer programming model has been formulated and a genetic algorithm (GA) has been proposed to solve problems of large sizes. Computational results show that the proposed GA is an effective method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.149-152
• /
• 2007

비전 연구에 있어서 객체 추적은 무엇보다도 중요시 되어 왔다. 특히 비디오 감시 시스템에서의 객체 추적은 매우 중요하다. 본 논문에서는 영상 내에서 움직이는 객체를 추출하고 객체내의 다중 후보블록의 통계적 특징을 이용한 추적 시스템을 구성하였다. 객체를 추적하기 위해서는 먼저 움직이는 객체 추출이 선행되어야 한다. 객체 추출은 영상 내에서 배경 프레임과 매 프레임에서의 현재 프레임간의 차 연산에 의한 가중치를 이용하여 객체의 움직임을 판단하고 추출하였다. 움직이는 객체는 본 논문에서 제안한 다중 후보 블록 알고리즘을 수행하여 추적에 필요한 통계 값을 획득한다. 통계 값으로는 방향성에 필요한 블록의 중심 좌표 값과 객체추적에 필요한 객체간의 매칭 정도를 사용하였다. 본 논문에서 제안한 추적 시스템은 민감한 빛의 변화에도 강건하였으며, 특정 블록에 대해서만 연산 수행을 수행하므로 컴퓨터의 연산을 줄여 실시간 추적도 가능하다.

• Solar Energy
• /
• v.9 no.1
• /
• pp.62-69
• /
• 1989

This analysis is to investigate the influence of inflow angle when cooling air flows into PC (Printed Circuit) board channels. Flow between PC board channels with heat generating blocks is assumed laminar, incompressible, two-dimensional. Geometric parameters (block spacing (S), block height (H), block width (W) and channel height (L)) are held fixed. Inflow angle variations are $-10^{\circ},\;0^{\circ},\;10^{\circ}$, where uniform heat flux per unit axial length Q (W/m) from heated block surfaces is generated. The governing equations for velocity and temperature are solved by SIMPLE (Semi-Implicit Method Pressure for Linked Equation) algorithm. Nusselt number on each block surfaces is analyzed after a numerical calculation result. The result shows that the assumption on parallel inflow (inflow angle to channel, $0^{\circ}$) to PC board channels can be used without large error even when inflow' angle is varied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.1091-1096
• /
• 2003

Pullout tests of single headed bars using plain concrete blocks indicate that the embedment depth of $10d_b$ is in general required for the headed bars to develop pullout strength equivalent to 125% of bar yield strength. In this experimental study, test results of multiple headed bars installed in reinforced concrete column sections are presented. Test variables included embedment depth, column main reinforcement ratio, and spacing of column ties. 2D29 bars were pulled out at one time from normal strength concrete. Test results indicated that the embedment depths, column tie spacings, and column main reinforcement ratios all influenced the pullout strengths of the headed bars. When the embedment depth was not sufficient, narrow tie spacings especially resulted in increased pullout strengths of the headed bars. Test results also indicated that the embedment depth of 15㏈ was sufficient for the closely spaced two headed bars (head-to-head spacing =$6d_b$) to develop pullout strength equivalent to 125% of the bar yield strength.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.10-22
• /
• 1998

To handle the density increase of SRAMs, a new parallel testing methodology based on built-in self test (BIST) is developed, which allows to access multiple cells simultaneously. The main idea is that a march algorithm is dperformed concurently in each baisc marching block hwich makes up whole memory cell array. The new parallel access method is very efficient in speed and reuqires a very thny hardware overhead for BIST circuitry. Results show that the fault coverage of the applied march algorithm can be achieved with a lower complexity order. This new paralle testing algorithm tests an .root.n *.root.n SRAM which consists of .root.k * .root.k basic marching blocks in O(5*.root.k*(.root.k+.root.k)) test sequence.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.195-200
• /
• 2007

Doubly-selective channel estimator for orthogonal frequency division multiplexing(OFDM) systems is proposed in this paper. Based on the generalized complex exponential basis expansion model(GCE-BEM), we describe the time-variant channel with time-invariant coefficients over multiple OFDM blocks. The time variation of the channel destroys the orthogonality between subcarriers, and the resulting channel matrix in the frequency domain is no longer diagonal, but the main interference comes from the near subcarriers. Based on this, we propose a channel estimator with low pilot ratio. We first develop a least-square(LS) estimator under the assumption that only the maximum Doppler frequency and the channel order are known at the receiver, and then verify that the correlation matrix of inter-channel interference(ICI) is a scaled identity matrix based on which we derive an optimal pilot insertion scheme for the LS estimator in the sense of minimum mean square error. The proposed estimator has the advantages of low pilot ratio and robustness against inter-carrier interference.

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1210-1217
• /
• 1999

This paper presents schematic process of identifying the principal cause to make the vibration problem of rotating circular saws. In the tandem pencil slat saw lines, feeding of cedar blocks is often stopped because excessive motro current is required in a saw motor. These events are called "kick-offs" in technical reports. Research on saw behavior at kick-offs is required to understand are reduce the frequency and severity of kick-offs events. This research aims at finding out the principal cause of kick-offs, and evloving design improvements for high cutting performance with fewer and less severe kick-offs. Measurements of critical speed, cutting force, cutting temeprature and dynamic displacements are carried out to observe the instability mechanism and also to obtain saw design parameters for the numerical analyses. And the numerical analyses involving FEM and multiple scale method are utilized to show the possibility of the principal cause.pal cause.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.29-35
• /
• 2015

The heterogeneous LTE (Long Term Evolution)-Advanced networks comprising a macrocell and femtocells can provide an efficient solution not only to extend macrocell coverage but also to deal with packet traffics increasing explosively within macrocells. An efficient resource management scheme is necessary to maintain the QoS (Quality of Service) of mobile multimedia services because the LTE-Advanced system should support not only voice but also mobile applications such as data, image and video. This paper proposes a resource management scheme to guarantee QoS continuity of multimedia services and to maximize the resource utilization in OFDMA (Orthogonal Frequency Division Multiple Access) based LTE-Advanced systems. This scheme divides the resources into several service blocks and allocates those resources based on the competition between macrocell and femtocell. Simulation results show that it provides better performances than the conventional one in respect of handover failure rate and blocking rate.

• BMB Reports
• /
• v.53 no.1
• /
• pp.28-34
• /
• 2020

Sphingolipids are ubiquitous building blocks of eukaryotic cell membranes that function as signaling molecules for regulating a diverse range of cellular processes, including cell proliferation, growth, survival, immune-cell trafficking, vascular and epithelial integrity, and inflammation. Recently, several studies have highlighted the pivotal role of sphingolipids in neuroinflammatory regulation. Sphingolipids have multiple functions, including induction of the expression of various inflammatory mediators and regulation of neuroinflammation by directly effecting the cells of the central nervous system. Accumulating evidence points to sphingolipid engagement in neuroinflammatory disorders, including Alzheimer's and Parkinson's diseases. Abnormal sphingolipid alterations, which involves an increase in ceramide and a decrease in sphingosine kinase, are observed during neuroinflammatory disease. These trends are observed early during disease development, and thus highlight the potential of sphingolipids as a new therapeutic and diagnostic target for neuroinflammatory diseases.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.177-178
• /
• 2007

WiBro system provides reliable broadband communication services for mobile and portable subcribers. It allows interference-free reception under the conditions of multipath propagation and transmission errors. Thus, powerful channel-error correction ability Is required. CC/CTC Decoder which Is mandatory for WiBro system needs lots of computations for real-time operation. So, it is desired to design a CC/CTC Decoder having highly optimized hardware scheme for low latency operation under high data rates. This paper proposes an efficient CC/CTC Decoder structure for high data rate WiBro system. Particularly, the proposed CTC Decoder architecture reduces decoding delay by applying pipelining and multiple decoding blocks. Simulation results show that reduction of about 80% of processing time is enabled with the proposed CC/CTC Decoder despite of increase in are.