• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.396-400
• /
• 2007

LTCC(Low Temperature Co-fired Ceramic) which offers a good performance to produce multilayer structures with electronic circuits and components has emerged as an attractive technology in the electronic packaging industry. In LTCC module fabrication process, the lamination and the sintering are very important processes and affect the electrical characteristics of the final products because the processes change the permittivity of ceramics and the dimension of the circuit patterns which have influences on electronic properties. This paper discusses the influence of lamination pressure and sintering temperature on the permittivity and the dimensional change of LTCC products. In the present investigation, it is shown that the permittivity increases along with increasing of the lamination pressure and the sintering temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.203-204
• /
• 2008

In this study, in order to develop the multilayer piezoelectric actuator and ultrasonic resonator, PMN-PNN-PZT ceramics were fabricated by the variations of ball size at sintering temperature of $900^{\circ}C$ and their piezoelectric and dielectric characteristics were investigated as a function of the variations of ball size. When the ball size was 3mm$\phi$, density, dielectric constant$({\varepsilon}r)$, electromechanical coupling factor(kp) and piezoelectric d constant$(d_{33})$ were increased. At the ball size of 3mm$\phi$, the specimen showed the optimum values of density=7.909g/$cm^3$, kp=0.592, Qm=1292, $d_{33}$=368pC/N, $\varepsioln_r$=1502, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.33-34
• /
• 2008

Barium titanate (BaTiO3) is one of the most important dielectric materials for the electronic devices, such as MLCC (Multilayer Ceramic Capacitor). The thickness of the dielectric thin film in MLCC has become thinner and reached about 0.8 ${\mu}m$. Further down sizing is required for the higher performance. For this reason, we should take into account for the size effect of Barium titanate powders. In this study, we demonstrated that size effect for BaTiO3 (0.2 ~ 0.5 ${\mu}m$, hydrothermal BT) could be estimates by using dielectric properties analysis together with the powder properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.630-633
• /
• 1999

This paper presents a new sort of multilayer piezoelectric ceramice transformer for switching regulatied power supplies. And this paper presents the study and development of a DC-DC converter with a transformer made from piezoelectric materials. This piezoelectric transformer operate, in the second thickness extensional vibration mode. Its resonant frequency is higher than 1MHz, This piezoelectric transformer was used the PbTiO$_3$ family ceramics because it was a material large anisotropy between electromechanical coupling factors k$_{t}$ and k$_{p}$. The input and output layer consists of two piezoelectric ceramic layer for eleivater of outpur power.wer.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.130-133
• /
• 2002

Solder leaching resistance of the metal electrode is an important factor with regard to adhesion properties of ceramic substrate. In the Low Temperature Co-fired Ceramics (LTCC), Ag-Pd or Ag-Pt pastes are used instead of pure Ag paste to prevent leaching. Solder leaching behavior of the Ag-Pd paste in relation to LTCC raw material powder size was investigated. First fabrication of LTCC green tape with different particle size was done. LTCC substrates with Ag-Pd electrode were prepared using conventional multilayer ceramic process. Dipping test was performed to test solder leaching behavior of the electrode. Ag-Pd electrode on LTCC substrate with smaller particle size achieved higher solder leaching resistance.

• Transactions on Electrical and Electronic Materials
• /
• 제1권3호
• /
• pp.1-5
• /
• 2000

This paper presents a new sort of multilayer piezoelectric ceramic transformer for switching regulation power supplies. This piezoelectric transformer operate in the second thickness resonant vibration mode. Accordingly its resonant frequency is higher than 1 NHz, Because output power is low if input and output part of transformer are consisted of single layer, this research suggests a new method, which is consisted of both input and output part of transformer have 2-layered piezoelectric ceramics, The size of transformer is 20 mm in width and length, and 1.4 mm in thickness, respectively, To design a high efficient switching circuit of the transformer, internal circuit parameters were measured and then weve calculated a parameter of inductor nd capacitor to design a driving circuit, Weve used a MISFET and its driver circuit modified a calp oscillator circuit as the primary switching circuit.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.532-539
• /
• 1996

Diamond-like carbon (DLC) films were deposited on silicon substrates by the plasma decomposition of hydrocarbons under various conditions, and studied by the spectroscopic ellipsometry (SE). We used the effective medium approximation with the dispersion model developed by Forouhi and Bloomer to determine simultaneously both the structure and the optical constants of the DLC films from their ellipsometric spectra. Especially, we investigated the variation of the multilayer structure including the interface layer, of the refractive indices, and of the extinction coefficients as the deposition conditions were varied; substrate pretreatment procedure, hydrocarbon precursors, and the substrate bias voltage were varied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.290-291
• /
• 2007

In this study, in order to develop the low temperature sintering multilayer piezoelectric actuator, PZW-PMN-PZT system ceramics were manufactured according to variation of sintering aids. At the sintering temperature of $900^{\circ}C$, $0.3wt%Li_2CO_3$, $0.2wt%Bi_2O_3$ and 0.2wt%CuO added specimen showed a maximum value of kp = 0.552, $d_{33}\;=\;344pC/N$ and Qm = 1320, respectively.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.783-787
• /
• 2004

[ $Ba_5Nb_4O_{15}$ ] 세라믹스의 소결 온도를 낮추기 위하여 $PbO-B_2O_3-SiO_2$계 glass frit를 $0.5\~10w\%$ 첨가하고 소결 조건 변화에 따른 마이크로파 유전특성과 미세구조를 조사하였다. $Ba_5Nb_4O_{15}$ 유전체의 소결 밀도와 마이크로파 유전특성은 액상 소결조제로서 첨가한 glass frit의 첨가량에 따라 크게 변화하였다. $PbO-B_2O_3-SiO_2$계 glass frit을 $3wt\%$ 첨가하고 $900^{\circ}C$에서 2시간 소결한 시편은 유전상수(K) 41.4, 품질계수(Q$\times$f) 13,485 GHz, 공진주파수 온도계수(TCF) 9 ppm/$^{\circ}C$의 마이크로파 유전특성을 나타내었다. 또한, 상기 조성의 유전체 재료는 Ag 전극과의 동시소결에도 물리, 화학적 반응이 없어 적층형 유전체 필터 재료로서 적합한 재료라고 판단된다.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.563-567
• /
• 2011

The most widely used piezoelectric ceramics are lead oxide based ferroelectrics (PZT). However, the toxicity of lead oxide and its high vapor pressure during processing have led to a demand for alternative lead-free piezoelectric materials. We synthesized Lead-free piezoelectric ceramics of $0.96(K_{0.5}Na_{0.5})NbO_3-0.04SrZrO_3+x$ mol% $ZrO_2$ [KNN-SZ+$xZrO_2$; x= 0~0.10] doped with 0.1 wt% $MnO_2$ by a conventional solid state method. We investigated the piezoelectric properties and microstructures of these disk samples sintered in reduced atmosphere in order to evaluate the possibility of the multilayered piezoelectric ceramics having the base metal such as Ni as a internal electrode. All of these KNN-SZ samples sintered in 3%$H_2-97%N_2$ atmosphere at $1,140^{\circ}C$ exhibit pure perovskite structure irrespective of the content of $ZrO_2$. Meanwhile, the sintering denisty and piezoelectric properties such as $K_p$, $Q_m$ and $d_{33}$ of KNN-SZ samples as a function of $ZrO_2$ content show the maxima ($k_p$=28.07%, $Q_m$= 101.34, $d_{33}$= 156 pC/N) at x= 0.04 and it is likely that there is some morphotropic phase boundary(MPB) in this KNN-SZ+$xZrO_2$ composition system. These results indicate that the ceramic composition is a promising candidate material for applications in lead free multilayer piezoelectric ceramics.