• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.167-173
• /
• 2012

PURPOSES : This study is to develop speed correction factor for more realistic Level-of-Service(LOS) at multilane highway. METHODS : In this study, we compared speed difference the degree of speed reductions in actual multilane road conditions with speed reduction considering speed correction factor presented in highway capacity manual using statistical techniques. And also we presents new speed correction factor analyzing collected data at national highway No.1 (Goyang~Wolrung). RESULTS : The result of analyzing and comparing new suggested speed correction factor with speed correction factor in Korea Highway Capacity Manual (KHCM) shows RMSE (Root Mean Square Error) in new speed correction factor (RMSE 1.5) is much lower than existing speed correction factor (RMSE 13.4). New suggested speed correction can be used for analyzing Level-of-Service at multilane highway. And also we suggests improvements for analysis procedure in analyzing Level-of-Service at multilane highway CONCLUSIONS : As a result of comparing differences, we draw the causes that effect the differences in speed and suggest new speed correction factor that consider traffic volumes. It can be more rational because it uses speed correction factor which can consider more realistic traffic conditions, etc.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.807-815
• /
• 2012

In this paper, we propose a scheme for partially dynamic lane control for energy saving in multilane-based high-speed Ethernet. In this scheme, among the given transmission lanes, at least one lane is always operating, and the remaining lanes are dynamically activated to alleviate the network performance in terms of queuing delay and packet loss in the range of acceptance. The number of active lanes is determined by the decision algorithm based on the information regarding traffic and queue status. The reconciliation sublayer adjusts the transmission lane with the updated number of lanes received from the algorithm, which guarantees no processing delay in the media access control layer, no overhead, and minimal delay of the exchanging control frames. The proposed scheme is simulated in terms of queuing delay, packet loss rate, lane changes, and energy saving using an OPNET simulator. Our results indicate that energy savings of around 55% (or, when the offered load is less than 0.25, a significant additional savings of up to 75%) can be obtained with a queuing delay of less than 1 ms, a packet loss of less than $10^{-4}$, and a control packet exchange time of less than $0.5{\mu}s$ in random traffic.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.461-464
• /
• 2010

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.75-82
• /
• 2007

This study was performed to investigate impacts of truck lane restrictions on multilane highways on traffic flow variables such as average speed, the frequency of lane changes, and change in traffic volume and also to verify whether or not different lane restriction scenarios were proper. Two types of hypothetical highway networks and OD demands were developed for traffic simulation models in order to conduct the experimental study. Three types of scenarios were also developed according to the number of restricted lanes for trucks. The PARAMICS microscopic traffic simulation software package was used as the primary analytical tool. Statistical analysis was conducted with simulation outputs. Results showed that truck lane restrictions may lead to positive impacts on traffic flow on multilane highways. In addition, this study demonstrated that the number of restricted lanes can be very an important factor to lead successful implementation of truck lane restrictions.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.16-24
• /
• 1999

This paper deals with the dynamic vehicle arbitration algorithm for communication between vehicles and a roadside control init on multilane environment. The suggested algorithm varies its parameter values according to the current vehicle arrival rate to get the maximum performance. To get the optimum parameter values, arbitration methods that use random delay counter and persist mechanism were taken into account and the performance of these methods with respect to the vehicle arrival rate was analyzed by computer simulation. After applying the optimum parameter values to suggested algorithm, it is shown that more enhanced reliability was acquired This algorithm could be applied to various systems which include the communication between a transponder and a control unit.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.131-143
• /
• 2012

The past researches on roadway segment safety estimation focused on intersections, which are the primary traffic accident regions. The past researches on roadway segments, However, analyzed the effects of certain factors on the traffic accident occurrence rate by organizing the individual geometric structures of the roads, and there is still a dearth of researches on the development of a traffic accident estimation model for rural roadway segments. Therefore, this research focused on rural two-lane and multilane roadway segments and developed traffic accident estimation models through the application of statistical techniques. This is required to explain such high frequency of zero counts in the traffic accident data. In this research, it was found that the Hurdle model is more suitable than the Poisson or negative binomial-regression model for explaining the excess zeros case. In addition, main variables were chosen to estimate their effects on traffic accident occurrence at rural roadway segments, and the safety at such rural roadway segments was estimated. In this research, it was assumed that there are different factors that affect the safety at two-way lane and multilane roadway segments, and a traffic accident estimation model was developed by dividing the two-way lane and multilane roadway segments.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.43-53
• /
• 1988

This study is to find the proper method of estimating urban road traffic capacity. To estimate road traffic capacity, the following methods are chosen ; 1) crossing point of Q-V and S-V, 2) critical velocity and density of Q-V-K model, 3) V-K model with density parameter. The density estimated through S-V relation is 174 veh./km. The methods used in this paper yields more stable values with 2286 veh./h/ in average. The estimated average capacity by three methods are 2272 veh./h. in multilane road. 2411 veh./h in three lane road and 2185 veh./h. in two lane road.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.146-149
• /
• 2013

We propose a reconciliation sublayer (RS)-based lane and traffic control protocol for energy-efficient 40-G/100-G Ethernet. The RS performs active/inactive lane control and data rate adaptation depending on active lane information received from the upper layer. This protocol does not result in a processing delay in the media access control layer, nor is an additional buffer required at the physical layer for dynamic lane control. It ensures minimal delay and no overhead for the exchange of control frames and provides a simple adaptive data rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.253-263
• /
• 2021

Traffic data collected using advanced equipment are highly valuable for traffic planning and efficient road operation. However, there is a problem regarding the reliability of the analysis results due to equipment defects, errors in the data aggregation process, and missing data. Unlike other detectors installed for each vehicle lane, radar detectors can yield different error types because they detect all traffic volume in multilane two-way roads via a single installation external to the roadway. For the traffic data of a radar detector to be representative of reliable data, the error factors of the radar detector must be analyzed. This study presents a field survey of variables that may cause errors in traffic volume collection by targeting the points where radar detectors are installed. Video traffic data are used to determine the errors in traffic measured by a radar detector. This study establishes three types of radar detector traffic errors, i.e., artificial, mechanical, and complex errors. Among these types, it is difficult to determine the cause of the errors due to several complex factors. To solve this problem, this study developed a radar detector traffic volume error analysis model using a multiple linear regression model. The results indicate that the characteristics of the detector, road facilities, geometry, and other traffic environment factors affect errors in traffic volume detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.276-282
• /
• 2005

These studies developed system as well as its algorithm which can measure traffic flow and vehicle speed on the highway as well as road by using industrial television(ITV) system. This algorithm used the real time processing of dynamic images. The processing algorithm of dynamic images is developed and proved its validity by frame grabber. Frame grabber can process the information of a small number of sample points only instead of the whole pixel of the images. In the techniques of this algorithm, we made approximate contour of vehicle by allocating sampling points in cross-direction of image, and recognized top of contour of vehicle. Applying these technique, we measured the number of passing vehicles of one lane as well as multilane. Speed of each vehicle is measured by computing the time difference between a pair of sample points on two sample Points lines.