• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.1008-1015
• /
• 2012

Sulgidduk is a kind of basic steamed rice cake in Korea. Multifunctional portable grinder was used for making sulgidduk and investigated the characteristic changes of rice powder for deciding the proper particle size of rice powder. Operation times for grinding the water absorbed swelled rice were 10, 20, 30 and 40 seconds. Moisture contents of rice powder and sulgidduk showed an increasing tendency with an increase of operation times for grinding. Springiness showed significant differences according to the operation times. Cohesiveness was decreased severely after 40 seconds grinding. Chewiness showed high after 20 seconds grinding in all groups; however, decreased after 40 seconds grinding and showed similar chewiness of the control group. Fracturability also showed severe increased tendency after 20 seconds grinding and decreased after 30 seconds grinding. Strength and hardness showed significant differences; they were increased until 30 seconds and severely decreased after 40 seconds grinding. L values showed significant differences in all the groups ($p{\leq}0.05$). The a and b values did not show any differences in all groups. Overall sensory evaluations, such as colors, flavors and texture, were increased with operation times for grinding and showed significant differences among the groups (p<0.05). As a result of this study, 40 seconds grinding times were the best condition for making sulgidduk, using by multifunctional grinder.

• Composites Research
• /
• 제29권6호
• /
• pp.395-400
• /
• 2016

최근에는 이온 전도도의 감소없이 높은 기계적 물성을 가진 구조 복합재를 개발하기 위하여 에폭시 매트릭스를 기반으로 하여 전해질을 함유한 다기능성 구조 전해질에 대한 연구가 활발히 진행 중이다. 구조 전해질의 최적 함량 및 소재 선정에 대해서는 많이 연구되고 있는 반면, 경화 거동에 따른 특성 분석에 관한 연구는 더디게 진행되고 있기 때문에 본 연구에서는 구조 성능과 에너지 저장 성능을 동시에 가진 고체 전해질을 함유한 에폭시 기반의 구조 전해질을 다양한 경화 시간 및 온도에 따라 제조하고 기계적 특성 및 이온 전도도 특성을 측정하였다. 그리하여 전해질의 열 분해가 일어나지 않는 온도 범위 내에서 에폭시가 충분히 경화할 수 있는 경화 조건을 통해 115 MPa와 $6{\times}10^{-5}S/cm$의 값을 동시에 가지는 구조 전해질을 얻었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.25-25
• /
• 2003

BaTi₄O/sub 9/계 세라믹스에 저온 소결 조제로 첨가된 lithium-borosilicate계 유리 프리트의 첨가에 따른 상분해 현상을 XRD, TEM에 의하여 분석하였다. 유리 프리트의 첨가가 없는 BaTi₄O/sub 9/계 세라믹스는 첨가량과 열처리 온도에 관계없이 BaTi₄O/sub 9/상과 소량의 TiO₂상만이 관찰되었으나 저온 소결 조제로 사용된 유리 프리트의 첨가량이 증가할수록 BaTi₄O/sub 9/계 세라믹스는 BaTi₄O/sub 9/상 보다 Ti-rich상인 Ba₂Ti/sub 9/O/sub 20/상, BaTi/sub 5/O/sub 11/상, 또는 BaTi/sub 5/O/sub 11/상과 Ba₄Ti₃O/sub 30/상으로 공존하며 분해되는 것을 관찰하였다. 공존하며 분해되는 것을 관찰하였다. 유리 프리트가 10 wt% 첨가시 600℃ 까지는 BaTi₄O/sub 9/상과 TiO₂상으로 존재하였으나 700℃ 전후에서 BaTi/sub 5/O/sub 11/상과 Ba₄Ti/sub 13/O/sub 30/상으로 분해되기 시작하여 875℃에서는 BaTi₄O/sub 9/상이 완전히 분해되어 BaTi/sub 5/O/sub 11/상이 주상으로 Ba₄Ti/sub 13/O/sub 30/상은 이차상으로 존재하는 것을 확인하였다. 또한, 열처리 온도가 증가할수록 Ba₄Ti/sub 13/O/sub 30/상이 상대적으로 감소하고 있는 것도 관찰할 수 있었다.

• Smart Structures and Systems
• /
• 제12권1호
• /
• pp.23-39
• /
• 2013

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.162-162
• /
• 2016

We present multifunctional indium tin oxide (ITO) thin films formed at room temperature by a normal sputtering system equipped with a plasma limiter which effectively blocks the bombardment of energetic negative oxygen ions (NOIs). The ITO thin film possesses not only low resistivity but also high gas diffusion barrier properties even though it is deposited on a plastic substrate at room temperature without post annealing. Argon neutrals incident to substrates in the sputtering have an optimal energy window from 20 to 30 eV under the condition of blocking energetic NOIs to form ITO nano-crystalline structure. The effect of blocking energetic NOIs and argon neutrals with optimal energy make the resistivity decrease to $3.61{\times}10-4{\Omega}cm$ and the water vapor transmission rate (WVTR) of 100 nm thick ITO film drop to $3.9{\times}10-3g/(m2day)$ under environmental conditions of 90% relative humidity and 50oC, which corresponds to a value of ~ 10-5 g/(m2day) at room temperature and air conditions. The multifunctional ITO thin films with low resistivity and low gas permeability will be highly valuable for plastic electronics applications.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 1997

Plasma techniques permit modification of the surface layers of the substrate while maintaining its bulk properties. The use of plasma treatment on textile fibers and fabrics is very limited, however, the limitations, plasma treatments have been used to modify surface properties of textiles. In this study, multifunctional finish was performed by corona discharge technique for surface functionalization. Electron spectroscopy for chemical analysis(ESCA) was used to determine the ratios of carbon, oxygen, nitrogen, and phosphor at a 20$\AA$ sampling depth. K/S value and limiting oxygen index(LOI) value were used to obtain information on the effect of the finished fabrics. The mechanism of the flame retardancy was analyzed by the thermogravimetry-and the residue number. In ESCA, relative N1s intensity increased in case of mixtrure. The flame retardancy of the polyester and polyester/cotton fabrics treated with JA-6034 and JA-6050 was found to be operative mainly in the condensed phase mechanism. The multifunctional finish was better effect for the post treated finish agent.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.13-27
• /
• 2005

Simultaneous precision positioning and vibration suppression of a reciprocating flexible manipulator is investigated in this paper. The flexible manipulator is driven by a multifunctional active strut with fuzzy logic controllers. The multifunctional active strut is a combination of a motor assembly and a piezoelectric stack actuator to simultaneously provide precision positioning and wide frequency bandwidth vibration suppression capabilities. First, the multifunctional active strut and the flexible manipulator are introduced, and their dynamic models are derived. A control strategy is then proposed, which includes a position controller and a vibration controller to achieve simultaneous precision positioning and vibration suppression of the flexible manipulator. Next, fuzzy logic control approach is presented to design a fuzzy logic position controller and a fuzzy logic vibration controller. Finally, experiments are conducted for the fuzzy logic controllers and the experimental results are compared with those from a PID control scheme consisting of a PID position controller and a PID vibration control. The comparison indicates that the fuzzy logic controller can easily handle the non-linearity in the strut and provide higher position accuracy and better vibration reduction with less control power consumption.

• 센서학회지
• /
• 제29권1호
• /
• pp.40-44
• /
• 2020

An integrated multifunctional sensor, capable of raising an early electric-fire warning, was fabricated. An arc-light, temperature, and humidity sensor was fabricated on a flexible substrate using a printed thin film of indium tin oxide. A polyethylene terephthalate (PET) substrate was used as the flexible substrate. The sensor was fabricated on a PET substrate, and its operating characteristics were tested. The operating performances of the sensor when serving as an arc-light, a temperature, and a humidity sensor were estimated to be 0.6247 Ω/W, 80.6 Ω/K, and -4.08 Ω/RH, respectively. The feasibility of the proposed fire sensor was demonstrated; it costs low and offers multiple functionalities.

• 폴리머
• /
• 제24권6호
• /
• pp.763-769
• /
• 2000

E-beam 전조사법을 이용하여 아크릴산과 스틸렌 단량체를 폴리프로필렌 섬유에 그라프트 반응시켜 PP-g-(AAc/Sty) 공중합체를 합성하고 술폰화 반응시켜 다관능성 섬유상 양이온 교환체를 합성하였다. 합성체의 그라프트율은 물과 메탄올 혼합비가 30 : 70 vol%인 혼합용매에서 아크릴산과 스틸렌, 단량체비가 30 : 70 vol%일 때 190%로 최대이었으며 혼합용매의 조성비가 일정할 때 아크릴산 단량체의 양이 증가할수록 그라프트율은 감소하였다. 또한 이온교환체의 이온교환용량은 4.6 meq/g이었으며, 술폰화 이온교환체와 아크릴산 이온교환체의 리튬이온에 대한 흡착량을 비교한 결과 본 연구에서 합성한 이온교환체의 흡착성이 우수한 것으로 나타났다.

• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.243-249
• /
• 2005

The number of people who have lost limbs due to amputation has increased due to various accidents and diseases. Numerous attempts have been made to provide these people with prosthetic devices. These devices are often controlled using myoelectric signals. Although the success of fitting myoelectric signals (EMG) for single device control is apparent, extension of this control to more than one device has been difficult. The lack of success can be attributed to inadequate multifunctional control strategies. Therefore, the objective of this study was to develop multifunctional myoelectric control strategies that can generate a number of output control signals. We demonstrated the feasibility of a neural network classification control method that could generate 12 functions using three EMG channels. The results of evaluating this control strategy suggested that the neural network pattern classification method could be a potential control method to support reliability and convenience in operation. In order to make this artificial neural network control technique a successful control scheme for each amputee who may have different conditions, more investigation of a careful selection of the number of EMG channels, pre-determined contractile motions, and feature values that are estimated from the EMG signals is needed.