• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2119.1_2120.1
• /
• 2009

UWB(Ultra Wide Band)는 차세대 무선통신 기술로 무선 디지털펄스라고도 한다. GHz대의 주파수를 사용하면서도 초당 수천~수백만 회의 저출력 펄스로 이루어진 것이 큰 특징이다[1]. 기존 무선통신 기술의 양대 축인 IEEE 802.11과 블루투스 등에 비해 속도와 전력소모 등에서 월등히 앞서고 있으며, SoC(System on a Chip)의 저전력 구현에 대한 연구가 활발히 진행되고 있다. OFDM은 크게 FFT(Fast Fourier Transform) 블록, Interpolation /decimation 필터 블록, 비터비 블록, 변복조 블록, 등화기 블록 등으로 구성된다. 고속 시스템에서는 대역효율성이 우수한 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 사용하고 있으며, OFDM 전송방식은 직렬로 입력되는 데이터 열을 병렬 데이터 열로 변환한 후에 부반송파에 실어 전송하는 방식이다. 이와 같은 병렬화와 부반송파를 곱하는 동작은 IFFT와 FFT로 구현이 가능한데, FFT 블록의 구현 비용과 전력소모를 줄이는 것이 핵심사항이라고 할 수 있다. 기존논문에서는 OFDM용 FFT 구조로 단일버터플라이연산자 구조, 파이프라인 구조, 병렬구조 등의 여러 구조가 제안되었다[2]. 본 논문에서는 Radix-8 FFT 알고리즘 기반의 New partial Arithmetic 저전력 FFT 구조를 제안하였다. 제안한 New partial Arithmetic 저전력 FFT구조는 곱셈기 대신 병렬 가산기를 이용 하여 지금까지 사용되는 FFT 구조보다 전력소모를 줄일 수 있음을 보였다.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.44-52
• /
• 2010

Ultra-wideband (UWB) systems have witnessed a debate over whether they may cause interference to other existing and future narrowband systems sharing their band of operation. The detect and avoid (DAA) mechanism was developed as a solution to reduce interference to narrowband systems in order to ease regulatory concerns. It works by adaptively reducing the transmitted power at the overlapping bands upon detecting an active narrowband link. However, employing DAA degrades the performance of UWB transmissions. In this paper, we present the Korean UWB regulations as an example of regulations that require DAA in certain bands. We investigate DAA's impact on performance and propose a method to mitigate it, which provides UWB with the more efficient support of the DAA mechanism and enables it to avoid a larger number of narrowband users while sustaining the data rate. Results show significant improvement in performance with the application of our technique compared to conventional performance.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.182-191
• /
• 2004

In this paper, performances of different ultra-wideband (UWB) modulation schemes in the presence of timing jitter are evaluated and compared. Static and Rayleigh fading channels are considered. For fading channels, Oat and dispersive channels are assumed. First, bit error rate (BER) performances for each case are derived for a fixed value of timing jitter. Later, a uniform distribution of jitter is assumed to evaluate the performance of the system, and the theoretical results are verified by computer simulations. Finger estimation error is treated as timing jitter and an appropriate model is generated. Furthermore, a worst case distribution that provides an upper bound on the system performance is presented and compared with other distributions. Effects of timing jitter on systems employing different pulse shapes are analyzed to show the dependency of UWB performance on pulse shape. Although our analysis assumes uniform timing jitter, our framework can be used to evaluate the BER performance for any given probability distribution function of the jitter.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

In this paper, an impulse generator for UWB(Ultra Wide-band) technique with great possibility to be adopted as a next generation indoor WLAN(Wireless Local Area Network) has been designed by using SRD(Step Recovery Diode). Design goal is to design an impulse generator with simple structure, low cost, small size, and high performance. The impulse generator satisfied by FCC's regulation ( frequency range: 3.1~10.6 GHz, limit of power level: -41.25 dBm ) has been simulated by using ADS(Advanced Design System) which is the trade name of the Agilent Technologies. The output power of the impulse generator has been explained separately for single and multi band purposes, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.125-136
• /
• 2009

This paper presents a high-speed low-complexity two-bit level pipelined Viterbi decoder architecture for MB-OFDM UWB systems. As the add-compare-select unit (ACSU) is the main bottleneck of the Viterbi decoder, this paper proposes a novel two-bit level pipelined MSB-first ACSU, which is based on 2-step look-ahead techniques to reduce the critical path. The proposed ACSU architecture requires approximately 12% fewer gate counts and 9% faster speed than the conventional MSB-first ACSU. The proposed Viterbi decoder was implemented with $0.18-{\mu}m$ CMOS standard cell technology and a supply voltage of 1.8V. It operates at a clock frequency of 870 MHZ and has a throughput of 1.74 Gb/s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.443-450
• /
• 2011

Recently, various transmission techniques for communication and broadcasting systems have been developed to meet the dramatically increasing requirement of consumers. Because UWB (Ultra-Wideband) is a wireless communication technique that supports high data rate with low power, it can satisfy the requirement and can be applied to various wireless communication services. The multi-band orthogonal frequency division multiplexing (MB-OFDM) system, one of UWB system, is the wireless communication system that satisfies the transmission characteristic for UWB and so it can be used for various wireless communication services. In this paper, we propose a scheme that uses hierarchical modulation which is applied in digital video broadcasting system at the source and adaptive modulation based on the channel quality at the relays. The simulation results have shown that the proposed scheme has both the advantages of the increased throughput by 33% and similar BER performance to conventional scheme.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2010

In this paper, we present a fast Fourier transform (FFT) processor with four parallel data paths for multiband orthogonal frequency-division multiplexing ultra-wideband systems. The proposed 128-point FFT processor employs both a modified radix-$2^4$ algorithm and a radix-$2^3$ algorithm to significantly reduce the numbers of complex constant multipliers and complex booth multipliers. It also employs substructure-sharing multiplication units instead of constant multipliers to efficiently conduct multiplication operations with only addition and shift operations. The proposed FFT processor is implemented and tested using 0.18 ${\mu}m$ CMOS technology with a supply voltage of 1.8 V. The hardware- efficient 128-point FFT processor with four data streams can support a data processing rate of up to 1 Gsample/s while consuming 112 mW. The implementation results show that the proposed 128-point mixed-radix FFT architecture significantly reduces the hardware cost and power consumption in comparison to existing 128-point FFT architectures.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.67-74
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.38-44
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.467-474
• /
• 2007

MB-OFDM (Multiband-orthogonal frequency division multiplexing) UWB (ultra wide band) system uses DCM (dual carrier modulation) scheme to achieve high-data rate transmission. The basic idea of DCM is that to transmit the 4 bits more reliably two 16-QAM (quadrature amplitude modulation) symbols are used and the two 16-QAM sysmbols are allocated to each subcarrier of OFDM with maximum-distance. In the case of using the DCM, if one 16-QAM symbol is broken by deep fadding channel, a receiver can detect the transmitted signal by using another 16-QAM symbol. In the conventional ML(maximum likelihood) decision scheme, since the receiver does not use the CSI (channel state information), loss in diversity can not be reduced. In this paper, we propose improved soft-decision scheme with CSI for higher performance of MB-OFDM UWB systemn.