• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.379-384
• /
• 2000

High-Tc superconducting current leads with multi-step and continually varied cross-sectional area are studied to reduce heat leak into cryostat and material use. Assuming conduction-cooled lead the cross-sectional area is reduced along the heat flow direction according to the increase of critical current density which increases with decreasing temperature. In this study, we also analyze the multi-step cross-sectional area High-Tc current leads. The multi-st데 current leads changes the cross-sectional area to have constant safety-factor at changed section. The heat leak into cryostat, total voume, safety-factor and the temperature profiles are compared to those of the constant safety-factor current leads. The developed methods are applied to the Bi-2223 superconductor sheathed with Ag-Au alloy.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.84-88
• /
• 2001

The optimum cross-sectional area Profile of gas-cooled high-temperature superconductor (HTS) current lead is analyzed to have minimum helium boil-off rate. The conventional constant area HTS lead has much higher helium consumption than the optimum HTS lead considered in this study. The optimum HTS lead has variable cross-sectional area to have constant safety factor. An analytical formula of optimum shape of lead and temperature profile are obtained. For multi-step HTS current leads, the optimum tape lengths and minimum heat dissipation rate are also formulated. The developed formulations are applied to the Bi-2223 material, and the differences between constant area, constant safety-factor, and multi-step current leads are discussed.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.55-62
• /
• 2021

CO2 가스 발생 감소와 연비향상을 위해서 HEV 차량은 ISG 시스템을 채용하고 있다. 이 ISG 시스템은 배터리가 감당해야 하는 전기 부하를 증대시켰고, 시동 횟수도 급격히 늘어나게 하였다. 이를 위해 AGM 연축전지가 개발되어 사용되고 있으나, 종래의 연축전지에 비해서 formation 중 전해액량 조절이 더 높은 수준으로 유지해야 됨에 따라 충전시간이 약 3배 가량 길어지게 되었다. 본 연구에서는 formation pattern의 최적화를 통해서 충전효율을 증대시켜 충전시간을 단축하고자 하였다. formation pattern의 최적화를 위해서, 16개 multi step에 10개 충전 step과 6개의 방전 step을 적용하고, step별 충전 전류를 조절한 4가지 조건(21 hr, 24hr, 27 hr, 30 hr)으로 시험을 진행하였다. 그 결과 24 hr 시험 조건이 PbO2 변환율이 가장 높게 분석되었고, 용량 103.3 %, 저온시동성능 38 sec, 충전수입성 37.36 A로 나타났다. Multi-step과 방전 step을 적용한 충전 프로그램의 결과, 충전 중에 국부적으로 급격히 발생된 분극화를 제거하고 전류의 손실을 최소함으로써 충전효율을 증가시킬 수 있음을 검증하였다. 이렇게 충전효율을 증가시킴으로써 본 연구에서는 충전시간을 기존에 비해서 약 30 % 감소시키는 탁월한 결과를 얻을 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2112-2124
• /
• 2023

With the rise of economic and safety standards for nuclear reactors, new concepts of Gen-IV reactors and modular reactors showed more complex designs that challenge current tools for reactor physics analysis. A Monte Carlo (MC) two-step method was proposed in this work. This calculation scheme uses the continuous-energy MC method to generate multi-group cross-sections from heterogeneous models. The multi-group MC method, which can adapt locally-heterogeneous models, is used in the core calculation step. This calculation scheme is verified using a Gen-IV modular lead-based fast reactor (LFR) benchmark case. The influence of homogenized patterns, scatter approximations, flux separable approximation, and local heterogeneity in core calculation on simulation results are investigated. Results showed that the cross-sections generated using the 3D assembly model with a locally heterogeneous representation of control rods lead to an accurate estimation with less than 270 pcm bias in core reactivity, 0.5% bias in control rod worth, and 1.5% bias on power distribution. The study verified the applicability of multi-group cross-sections generated with the MC method for LFR analysis. The study also proved the feasibility of multi-group MC in core calculation with local heterogeneity, which saves 85% time compared to the continuous-energy MC.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.162-171
• /
• 2012

A method of hydrodynamic discrete sources is applied for two-dimensional modeling of stepped planing surfaces. The water surface deformations, wetted hull lengths, and pressure distribution are calculated at given hull attitude and Froude number. Pressurized air cavities that improve hydrodynamic performance can also be modeled with the current method. Presented results include validation examples, parametric calculations of a single-step hull, effect of trim tabs, and performance of an infinite series of periodic stepped surfaces. It is shown that transverse steps can lead to higher lift-drag ratio, although at reduced lift capability, in comparison with a stepless hull. Performance of a multi-step configuration is sensitive to the wave pattern between hulls, which depends on Froude number and relative hull spacing.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1072-1079
• /
• 2005

Conceptual design is the first step in the overall process of product design. Its intrinsic uncertainty, imprecision, and lack of information lead to the fact that current conceptual design activities in engineering have not been computerized and very few CAD systems are available to support conceptual design. In most of the current intelligent design systems, approach of principle synthesis, such as morphology matrix, bond graphic, or design catalogues, is usually adopted to deal with the concept generation, in which optional concepts are generally combined and enumerated through function analysis. However, as a large number of concepts are generated, it is difficult to evaluate and optimize these design candidates using regular algorithm. It is necessary to develop a new approach or a tool to solve the concept generation. Generally speaking, concept generation is a problem of concept synthesis. In substance, this process of developing design candidate is a combinatorial optimization process, viz., the process of concept generation can be regarded as a solution for a state-place composed of multi-concepts. In this paper, genetic algorithm is utilized as a feasible tool to solve the problem of combinatorial optimization in concept generation, in which the encoding method of morphology matrix based on function analysis is applied, and a sequence of optimal concepts are generated through the search and iterative process which is controlled by genetic operators, including selection, crossover, mutation, and reproduction in GA. Several crucial problems on GA are discussed in this paper, such as the calculation of fitness value and the criteria for heredity termination, which have a heavy effect on selection of better concepts. The feasibility and intellectualization of the proposed approach are demonstrated with an engineering case. In this work concept generation is implemented using GA, which can facilitate not only generating several better concepts, but also selecting the best concept. Thus optimal concepts can be conveniently developed and design efficiency can be greatly improved.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.49-61
• /
• 2009

本文为执行官提供了他们在处理日常业务问题和市场机会时如何阐述自己思考过程的培训. 本研究建立在Schank提出的教学基础上, 包括: (1)经验学习和最好的指导提供给学习者从诸如全球背景, 团队项目和专家经历等的互动的故事提炼知识和技能的机会. (2) 告诉不会导致学习, 因为在学习需要的行动训练环境中, 应强调积极使用故事, 案例和项目. 每个培训案例包括执行官解释自己的决策系统分析(DSA, 还需要执行官做DSA简报. 在训练时要求执行官写DSA简报. 在执行官学员写书面报告的说明中包括(1) DSA路线图的本质的细节(2) 警告和机会的陈述, 读者的行政地图及图内的DSA解释. 该报告的最大长度为500字, 其规则就是使行政人员培训课程行之有效. 引言之后是第二部分文献综述, 简要地总结了有关人们在对问题和机会的背景下的想法及文献. 第三部分通过使用对不同的贴牌生产客户定价相同的化学产品的培训练习来解释DSA的起源和过程, 第四部分展示一个炼油设备公司订价决策的培训练习. 第五部分提供一个商业客户办公家具采购的市场策略案例. 第六部分是结论和建议. 这些建议是关于使用培训课程和发展其他培训课程来磨练执行官制定决策的能力. 文章引导读者利用工具箱研究综合的报告, (DSA)路线图根据生态合理性理论将战略与环境相匹配. 这三个案例的研究让学习者在意愿层面征求建议来作出决策. Todd and Gigerenzer 提出人们使用简单启发式,因为他们在自然的决策环境中通过探索信息的结构使适应性行为有可能产生. "简单是一种美德, 而不是诅咒", 有限理性理论强调了西蒙的命题中心, "人类理性的行为仿佛一把剪刀, 其刀片则是任务环境的结构和执行者的计算能力". Gigerenzer的观点和西蒙的环境的危害相关, 也和本文中三个环境结构的案例相关. "环境这个词, 在这里, 并不是指总的物理和生理的环境, 而只是指被给予需要和目标的重要有机体 本文关注了结合任务环境的结构和使用适应的工具箱启发的报告. (DSA)路线图根据生态理性理论将战略与环境相匹配. 渴望适应理论是这一方针的核心. 渴望适应理论将决策制定作为一个没有把目标整合的多目标问题模拟成一个把所有决策选项进行完全的优先顺序化. 这三个案例研究让学习者在意愿层面征求建议来作出决策. 渴望适应用一系列的调整步骤的形式. 一个调整步骤通过仅一个目标变量的变化就可以改变在渴望网格上邻近点当前的渴望水平. 上调步骤是目标变量的提高, 下调步骤是目标变量的下降. 创造和使用渴望适应水平是对有限理性理论的整合. 文章通过提供学习者经验和实践环节增加了意愿采纳和有限合理性的理解和特点. 利用DSA图排列CTSs和撰写TOP可以清晰和深化Selten的观点 "清晰, 意愿采纳必须作为研究的解决方案整合到整个蓝图中". 这些有限理性的研究许可了在现实生活中为什么, 如何作决策的理论和在自然的环境中利用启发式的学习训练两方面的发展. 本文中的练习鼓励根据不同使用目的学习快速而简洁的启发式技巧和原则. 这也正回应了Schank的思想 "从本质上来看, 教育不是让学生们知道发生了什么, 而是让他们感受到所发生的事情. 这不容易做到. 在如今的学校教育是没有情感的, 这是一个很大的问题". 这三个案例和附加的练习问题遵守了Schank的观点. "这种教育过程最好是通过参与他们其中来实现, 也可以这样认为, 精神层面的积极讨论".