• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1065-1073
• /
• 1999

본 논문에서는 Haar 웨이블릿 기반 MRTD(MultiRes빼lion Time-Domain)를 이용하여 다층 PCB (Printed C Circuit Board)의 전원 공급면내에서 발생할 수 있는 Ground Bounce 문제를 해석하였다. 기존의 FDTD법을 이용한 모델링에서는 PCB 전원 공급연을 구성하는 $V_{cc}$연과 접지면 사이의 좁은 간격을 표현하기 위해 수직 방향으로 매우 작은 셀이 필요하다. 이에 따라 안정 조건(Stability Con며tion)에 의한 시간간격 $\Deltat$가 매우 작아 일정 시간 동안의 응답을 관찰하기 위해 많은 수의 반복 계산(Iteration)을 수행해야 한다. 이러한 문제 에 대해 MRTD를 적용하여 수직 방향 셀 크기를 두 배로 증가시켜 해석함으로써 계산 시간을 현저하게 감 소시킬 수 있다. 또한 MRTD에 의한 결과는 FDTD법에 의한 결과 및 해석적인 해와 매우 잘 일치한다. 본 논문의 결과는 PCB 상의 EMI/EMC 문제의 해석에 있어 MRTD의 정확성과 효율성을 잘 나타낸다.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.185-196
• /
• 1999

본 논문에서는 부분 그래프 패턴과 신경망을 이용한 새로운 한글 오프라인 인식 시스템을 제안하였다. 문자를 입력으로 받아 세선화를 행한 후 위치에 관한 잡음 제거 기능을 갖는 균형화를 수행하고 인식단의 첫번째 단계에서 순환 성분을 추출하고 인식한다. 부블럭 HT 공간에서 끝점, 굴곡점, 분기점의 특징점을 추출하고 추출된 특징점 사이의 관계를 조사하여 부분 그래프 패턴을 구성한다. 종모음이 올 수 있는 구역을 할당하고 종모음 후보점을 추출하여 미리 조사된 부분 그래프 패턴 사전과 비교하여 종모음을 추출한다. 같은 방법으로 횡모음을 추출한 후 간단한 구조 해석적 방법으로 모음을 인식한다. 본 논문의 성능비교를 위하여 실험은 활자체의 경우 가장 많이 쓰이는 명조체와 고딕체 그리고 필기체를 대상으로 한다. 고딕체의 경우 인식율 98.9%, 명조체의 경우 인식율 98.2%, 필기체의 경우 92.5% 이었다. 다중 자형 인식을 위하여 필기체와 활자체의 구분 없이 구한 전체 시스템의 인식율은 94.8% 이었다.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1330-1334
• /
• 2013

본 연구에서는 자가 음성평가에 따른 체질량지수를 비교하고자 하였다. 제5기(2010년) 1차년도 국민건강영양 조사 이비인후과 검진을 완료한 19세 이상의 성인을 5,811명을 대상으로 하며 자가음성평가와 체질량지수의 연관성을 분석하였다. 또한 체질량지수와 연관성이 깊은 키, 몸무게, 허리둘레 등도 함께 비교하여 자가음성평가와 어떠한 상관을 보이는지 살펴보았다. 비교를 위해 chi-square, t-test, 이변량 로지스틱 회귀분석을 이용하였으며 그 결과, 자가 음성평가에 따른 체질량지수는 유의한 차이를 나타내는 특성을 보이며, 체질량지수가 과체중-2단계 비만인 경우 정상체중보다 음성장애 위험률이 1.77배 높은 결과를 나타내었다. 또한 체질량지수가 음성장애 통제변수로서의 유의함을 확인하였으며, 음성장애 진단 시 키와 몸무게를 통한 체질량지수를 함께 비교하는 것은 필요하다는 것이 확인되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.56-67
• /
• 2012

In the present study, an enhanced subsurface prediction algorithm based on a non-parametric geostatistical model and a history matching technique through Gibbs sampler is developed and the iterative prediction improvement procedure is proposed. The developed model is applied to a simple two-dimensional synthetic case where domain is composed of three different hydrogeologic media with $500m{\times}40m$ scale. In the application, it is assumed that there are 4 independent pumping tests performed at different vertical interval and the history curves are acquired through numerical modeling. With two hypothetical borehole information and pumping test data, the proposed prediction model is applied iteratively and continuous improvements of the predictions with reduced uncertainties of the media distribution are observed. From the results and the qualitative/quantitative analysis, it is concluded that the proposed model is good for the subsurface prediction improvements where the history data is available as a supportive information. Once the proposed model be a matured technique, it is believed that the model can be applied to many groundwater, geothermal, gas and oil problems with conventional fluid flow simulators. However, the overall development is still in its preliminary step and further considerations needs to be incorporated to be a viable and practical prediction technique including multi-dimensional verifications, global optimization, etc. which have not been resolved in the present study.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.155-155
• /
• 2019

The Agricultural Policy/Environmental eXtender (APEX) models have been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. National Academy of Agricultural Sciences, Wanju, Korea, has modified a key component of APEX application, named APEX-Paddy for simulating water quality with considering appropriate paddy management practices, such as puddling and flood irrigation management. Calibration and validation are an anticipated step before any model application. Simple techniques are essential to assess whether or not a parameter should be adjusted for calibration. However, very few study has been done to evaluate the ability of APEX-Paddy to simulate the impact of multiple management scenarios on nutrients loss. In this study, the observation data from experimental fields at Iksan in South Kora was used in calibration and evaluation process during 2013-2015. The APEX auto- calibration tool (APEX-CUTE) was used for model calibration and sensitivity analysis. Four quantitative statistics, the coefficient of determination ($R^2$),Nash-Sutcliffe(NSE),percentbias(PBIAS)androotmeansquareerror(RMSE)were used in model evaluation. In this study, the hydrological process of the modified model, APEX-Paddy, is being calibrated and tested in predicting runoff discharge rate and nutrient yield. Field-scale calibration and validation processes are described with an emphasis on essential calibration parameters and direction regarding logical sequences of calibration steps. This study helps to understand the calibration and validation way is further provided for applications of APEX-Paddy at the field scales.

• International Journal of Computer Science & Network Security
• /
• 제22권6호
• /
• pp.390-399
• /
• 2022

Cyber security and resilience are phrases that describe safeguards of ICTs (information and communication technologies) from cyber-attacks or mitigations of cyber event impacts. The sole purpose of Risk models are detections, analyses, and handling by considering all relevant perceptions of risks. The current research effort has resulted in the development of a new paradigm for safeguarding services offered online which can be utilized by both service providers and users. customers. However, rather of relying on detailed studies, this approach emphasizes task selection and execution that leads to successful risk treatment outcomes. Modelling intelligent CSGs (Cyber Security Games) using MLTs (machine learning techniques) was the focus of this research. By limiting mission risk, CSGs maximize ability of systems to operate unhindered in cyber environments. The suggested framework's main components are the Threat and Risk models. These models are tailored to meet the special characteristics of online services as well as the cyberspace environment. A risk management procedure is included in the framework. Risk scores are computed by combining probabilities of successful attacks with findings of impact models that predict cyber catastrophe consequences. To assess successful attacks, models emulating defense against threats can be used in topologies. CSGs consider widespread interconnectivity of cyber systems which forces defending all multi-step attack paths. In contrast, attackers just need one of the paths to succeed. CSGs are game-theoretic methods for identifying defense measures and reducing risks for systems and probe for maximum cyber risks using game formulations (MiniMax). To detect the impacts, the attacker player creates an attack tree for each state of the game using a modified Extreme Gradient Boosting Decision Tree (that sees numerous compromises ahead). Based on the findings, the proposed model has a high level of security for the web sources used in the experiment.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제10권12호
• /
• pp.547-554
• /
• 2021

암을 유발하는 유전자는 모든 암 환자에게 공통적인 것은 아니며, 이러한 환자 특이적 암 유발 유전자의 탐색은 개인 맟춤형 암 치료 및 항암제 개발에 있어서 매우 중요하다. 환자 특이적 암 유발 유전자를 찾기 위한 생물 정보학 연구들이 있어왔지만, 아직 정확도 면에서는 발전의 여지가 있다. 본 논문에서는 환자 특이적 암 유발 유전자를 탐색하기 위하여 NPD (Network based Patient-specific Driver gene identification)라는 방법을 제안한다. NPD는 환자 특이적 유전자 네트워크를 구축하고, 여기에 수정된 PageRank 알고리즘을 적용하여 유전자에 점수를 부여한 후, 유전적 변이 데이터를 사용한 승률 계산 방법을 통하여 암 유발 유전자를 찾는 세 단계로 이루어진다. TCGA 데이터 베이스의 여섯 개의 암 데이터에 NPD를 적용한 결과, NPD가 기존의 환자 특이적 암 유발 유전자 탐색 방법들보다 전체적으로 높은 F1 점수를 보여줌을 확인할 수 있었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권3호
• /
• pp.213-223
• /
• 2022

Although the number of computed tomography(CT) is increasing every year, it is insufficient to establish appropriate workload calculation standards of radiologic technologist to provide optimal medical services to patients, such as patient safety management and infection management. The purpose of this study is to present guidelines for calculating the appropriate workload of radiologic technologist by analyzing the work flow of CT procedures and the time required for CT examination in major hospitals. As for the study subjects and methods, the appropriate process for each step of CT examination was investigated to systematically present the process and time required for the actual examination, and the CT procedure time of 104,105 adult patients and 465 pediatric patients under the age of 6 were analyzed. For the time required, data according to the use of contrast medium, procedure type, and adult/child were collected and compared. The test time of CT examination using contrast medium took about 13 minutes when one radiologic technologist worked and about 9 minutes when two radiologic technologists worked. The time required for the procedures were statistically significant depending on the presence or absence of contrast medium, multi-phase procedure, and patient age (considering pediatric patients). As a result, in order to thoroughly perform patient safety and infection management, the appropriate workload increased by about 40% when there were two radiologic technologists. The limit workload was an average of 32 people per day with one radiologic technologist per 15 minutes, and 48 people per day with two radiologic technologist per 10 minutes. This is a marginal workload, and in the case of procedures that require more time to acquire radiographic images, the interval between reservations should be widened.

• 천문학회보
• /
• 제45권1호
• /
• pp.59.2-59.2
• /
• 2020

Disks around protostars are the birthplace of planets. The first step toward planet formation is grain growth from ㎛-sized grains to mm/cm-sized grains in a disk, particularly in dense regions. In order to study whether grains grow and segregate at the protostellar stage, we investigate the ALMA Band 3 (3.1 mm) and 7 (0.87 mm) dust continuum observations of the protostellar disk WL 17 in ρ Ophiuchus L1688 cloud. As reported in a previous study, the Band 3 image shows substructures: a narrow ring and a large central hole. On the other hand, the Band 7 image shows different substructures: a non-axisymmetric ring and an off-center hole. The two-band observations provide a mean spectral index of 2.3, which suggests the presence of mm/cm-sized large grains. Its non-axisymmetric distribution may imply dust segregation between small and large grains. We perform radiative transfer modeling to examine the size and spatial distributions of dust grains in the WL 17 disk. The best-fit model suggests that large grains (>1 cm) exist in the disk, settling down toward the midplane, whereas small grains (~10 ㎛) well mixed with gas are distributed off-center and non-axisymmetrically in a thick layer. The low spectral index and the modeling results suggest that grains rapidly grow at the protostellar stage and that grains differently distribute depending on sizes, resulting in substructures varying with observed wavelengths. To understand the differential grain distributions and substructures, we discuss the effects of the protoplanet(s) expected inside the large hole and the possibility of gravitational instability.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.47-57
• /
• 2016

PURPOSES : This study aims to examine the differences between the existing traffic demand forecasting method and the traffic demand forecasting method considering future regional development plans and new road construction and expansion plans using a four-step traffic demand forecast for a more objective and sophisticated national highway maintenance. This study ultimately aims to present future pavement deterioration and budget forecasting planning based on the examination. METHODS : This study used the latest data offered by the Korea Transport Data Base (KTDB) as the basic data for demand forecast. The analysis scope was set using the Daejeon Metropolitan City's O/D and network data. This study used a traffic demand program called TransCad, and performed a traffic assignment by vehicle type through the application of a user equilibrium-based multi-class assignment technique. This study forecasted future traffic demand by verifying whether or not a realistic traffic pattern was expressed similarly by undertaking a calibration process. This study performed a life cycle cost analysis based on traffic using the forecasted future demand or existing past pattern, or by assuming the constant traffic demand. The maintenance criteria were decided according to equivalent single axle loads (ESAL). The maintenance period in the concerned section was calculated in this study. This study also computed the maintenance costs using a construction method by applying the maintenance criteria considering the ESAL. The road user costs were calculated by using the user cost calculation logic applied to the Korean Pavement Management System, which is the existing study outcome. RESULTS : This study ascertained that the increase and decrease of traffic occurred in the concerned section according to the future development plans. Furthermore, there were differences from demand forecasting that did not consider the development plans. Realistic and accurate demand forecasting supported an optimized decision making that efficiently assigns maintenance costs, and can be used as very important basic information for maintenance decision making. CONCLUSIONS : Therefore, decision making for a more efficient and sophisticated road management than the method assuming future traffic can be expected to be the same as the existing pattern or steady traffic demand. The reflection of a reliable forecasting of the future traffic demand to life cycle cost analysis (LCCA) can be a very vital factor because many studies are generally performed without considering the future traffic demand or with an analysis through setting a scenario upon LCCA within a pavement management system.