• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.339-350
• /
• 2009

Al-Fe-V-Si alloys reinforced with SiC particles were prepared by multi-layer spray deposition technique. Both microstructures and mechanical properties including hardness and tensile properties development during hot exposure process of Al-8.5Fe-1.3V-1.7Si, Al-8.5Fe-1.3V-1.7Si/15 vol% $SiC_P$ and Al-10.0Fe-1.3V-2Si/15 vol% $SiC_P$ were investigated. The experimental results showed that an amorphous interface of about 3 nm in thickness formed between SiC particles and the matrix. SiC particles injected silicon into the matrix; thus an elevated silicon concentration was found around $\alpha-Al_{12}(Fe,\;V)_3Si$ dispersoids, which subsequently inhibited the coarsening and decomposition of $\alpha-Al_{12}(Fe,\;V)_3Si$ dispersoids and enhanced the thermostability of the alloy matrix. Moreover, the thermostability of microstructure and mechanical properties of Al-10.0Fe-1.3V-2Si/15 vol% $SiC_P$ are of higher quality than those of Al-8.5Fe-1.3V-1.7Si/15 vol% $SiC_P$.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.408-416
• /
• 2009

A molecular survey was conducted to identify the presence of the bacterial blight resistance genes (Xa1, Xa4, xa5, xa13 and Xa21) in 86 accessions of aromatic rice obtained from germplasm. The results revealed that the resistance gene Xa4 (32.5%), Xa21 (17%), and xa5 (16%) were widely observed in tested rice germplasm. Among tested rice germplasm, 49 accessions showed the presence of more than one of five R genes, and 37 accessions possessed none of the R gene. TALLi and 05-IRRi-M-46 showed the presence of Xa4, xa5, xa13 and Xa21. Rice race $415{\times}Ir352$ exhibited positive amplicon for the Xa1, Xa4, xa5 and Xa21. Hyangmibyeo1hos, Ir841-85-1-1-2 and Jasmine85 showed the positive amplicon for the Xa1, Xa4 and xa5 genes. Yekywin Yinkya Hmwe and Khao Dawk Mali105 showed the presence of Xa1, Xa4 and Xa21 gene. Masino Basmati showed the presence of xa5, xa13, Xa21 genes. Xa1 and Xa21 genes were noticed in Mihayngbyeo, Tarana Deshi, Mayataung and AZUCENA. Hyangmibyeo2ho, Basmati 6311 and Basmati405 possessed only two R genes such as Xa4 and xa5, and xa5 and xa13, respectively. The evaluation results of bacterial blight resistance genes in aromatic rice germplasm will help in breeding of multi disease resistant varieties.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.319-332
• /
• 2002

Domestic masonry railroad tunnel lining consists of red bricks or granite stone blocks and mortar. It is necessary to evaluate the behaviour of the masonry tunnel lining during an earthquake because the lining was constructed without the consideration of seismic loads. In this study, a methodology to evaluate the seismic resistant capacity of masonry tunnel linings was proposed, i.e. material property evaluation and seismic analysis technique. The red brick masonry tunnel lining is arrayed with multi-layers composed of 3 to 5 bricks depending on ground conditions and each brick is attached with mortar. Equivalent property concept was adopted to consider the stiffness difference among the red brick material itself and joints between bricks. Response spectrum analysis was performed by considering ground-structure interactions. A parametric study was performed to figure out the effect of relative stiffness between the lining and rock mass on the seismic behavior. A resonable countermeasure to minimize the earthquake-induced damage was also proposed.

• Korean Journal of Veterinary Service
• /
• v.32 no.3
• /
• pp.241-249
• /
• 2009

Shiga toxin (Stx)-producing Escherichia coli (STEC) strains can cause broad spectrum of human disease, including diarrhea, hemorrhagic colitis, and the life-threatening hemolytic uremic colitis (HUS). We examined 868 samples was taken from bovine feces and carcass from January to December 2008 in Seoul. Twenty two (9.5%) shiga toxin -producing Escherichia coli were isolated from the 230 of bovine feces, and two (0.31%) were isolated from the 638 of carcasses. Serotype of E. coli isolates were O157 (10, 41.6%), O26 (10, 41.6%), O111 (1, 4.2%) and UT (3, 12.6%). In PCR, the isolates displayed three different stx gene combination (stx1 [2, 8.4%]), stx2 [3, 12.6%] and stx1 and stx2 [19,87.5%]). The eaeA and hlyA gene were found in 11 (45.8%) of the 24 strains. Saa gene was present only one strains (4.2%). Toxin typing using reverse passive latex agglutination test showed the same result in VT 1. But it showed different result in VT 2. In antimicrobial susceptibility test, all isolates were sensitive to amikacin, amoxicillin/clavulanic acid, ciprofloxacin and colistin. Eighteen strains (75.0%) of 24 isolates showed the multi-resistant patterns with over 3 drugs. PFGE was performed after the genomic DNA of twenty four isolates was digested with Xba I. the 24 isolates showed 7 (A~G) PFGE type.

• Computers and Concrete
• /
• v.3 no.1
• /
• pp.1-15
• /
• 2006

The seismic safety of reinforced concrete containment building can be evaluated by probabilistic analysis considering randomness of earthquake, which is more rational than deterministic analysis. In the safety assessment of earthquake-resistant structures by the deterministic theory, it is not easy to consider the effects of random variables but the reliability theory and random vibration theory are useful to assess the seismic safety with considering random effects. The reliability assessment of reinforced concrete containment building subjected to earthquake load includes the structural analysis considering random variables such as load, resistance and analysis method, the definition of limit states and the reliability analysis. The reliability analysis procedure requires much time and labor and also needs to get the high confidence in results. In this study, random vibration analysis of containment building is performed with random variables as earthquake load, concrete compressive strength, modal damping ratio. The seismic responses of critical elements of structure are approximated at the most probable failure point by the response surface method. The response surface method helps to figure out the quantitative characteristics of structural response variability. And the limit state is defined as the failure surface of concrete under multi-axial stress, finally the limit state probability of failure can be obtained simply by first-order second moment method. The reliability analysis for the multiaxial strength limit state and the uniaxial strength limit state is performed and the results are compared with each other. This study concludes that the multiaxial failure criterion is a likely limit state to predict concrete failure strength under combined state of stresses and the reliability analysis results are compatible with the fact that the maximum compressive strength of concrete under biaxial compression state increases.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.2
• /
• pp.109-120
• /
• 2018

Objectives: This study aimed to investigate the current status of infectious disease research in North Korea by analyzing recent trends in medical journals from North Korea in comparison with research from South Korea. Methods: Three medical journals (Preventive Medicine, Basic Medicine, and Chosun Medicine) were analyzed from 2012 to 2016. Articles on tuberculosis (TB), malaria, and parasitic diseases were selected and classified by their subtopics and study areas. Two medical journals published in the South Korea were selected for a comparative analysis of research trends. Results: Of the 2792 articles that were reviewed, 93 were extracted from North Korea journals. TB research in North Korea was largely focused on multi-drug resistant TB and extrapulmonary TB, whereas research in South Korea more frequently investigated non-tuberculous mycobacteria. Research on parasitic diseases in North Korea was focused on protozoan and intestinal nematodes, while the corresponding South Korea research investigated various species of parasites. Additionally, the studies conducted in North Korea were more likely to investigate the application of traditional medicine to diagnosis and treatment than those conducted in South Korea. Conclusions: This study presents an analysis of research trends in preventive medicine in North Korea focusing on infectious diseases, in which clear differences were observed between South and North Korea. Trends in research topics suggest a high prevalence of certain parasitic diseases in North Korea that are no longer widespread in South Korea. The large proportion of studies examining traditional medicine implies a lack of affordable medicine in North Korea.

• Toxicological Research
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2006

TALP-32 is highly basic protein with a molecular weight of 32 kDa purified from human term placenta. Some basic proteins such as defensins and cecropins are known to induce cell death by increasing membrane permeability and some of them are under development as an anticancer drug especially targeting multi-drug resistant cancers. Therefore, we investigated cytotoxic effect and mechanism of TALP-32 When HeLa cell was incubated with TALP-32, cytotoxicity was increased in time and dose dependent manner. As time goes by, HeLa cells became round and plasma membrane was ruptured. Increase of plasma membrane permeability was determined with LDH release assay. Also in transmission electron microscopy, typical morphology of necrotic cell death, such as cell swelling and intracellular organelle disruption was observed, but DNA fragmentation and caspase activation was not. And necrotic cell death was determined with Annexin V/Pl staining. The cytotoxicity of TALP-32 was minimal and decreased or RBC and Hep3B respectively. These data suggests that TALP-32 induces necrosis on rapidly growing cells but not on slowly growing cells implicating the possibility of its development of anticancer peptide drug.

• Korean Journal of Veterinary Research
• /
• v.56 no.2
• /
• pp.103-108
• /
• 2016

Salmonellosis is a major bacterial zoonosis that causes self-limited enteritis in animals and foodborne disease and typhoid fever in humans. Recently, multi-drug-resistant strains of Salmonella spp. have increased and caused more serious problems in public health. The present study investigated the antibacterial effects of egg-white lysozyme (EWL) against Salmonella (S.) Typhimurium and the therapeutic effects of EWL for murine salmonellosis. Evaluation of the antibacterial effects of EWL against S. Typhimurium revealed a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of EWL of 6.25 and $300{\mu}g/mL$, respectively. In the bacterial growth inhibition test, EWL at 300 (p < 0.05) and $600{\mu}g/mL$ (p < 0.01) significantly inhibited the growth of S. Typhimurium at 4 h post-incubation. EWL administration at MIC (LYS-1), MBC (LYS-2) and $2{\times}MBC$ (LYS-3) for 14 days resulted in mortality of mice infected with S. Typhimurium of 70, 40 and 10%, respectively, while that of control mice (CON) was 90%. Counts of S. Typhimurium in murine spleens were significantly lower in LYS-2 and LYS-3 than CON (p < 0.05). The results of this study indicate that EWL has the potential for treatment of ICR mice infected with S. Typhimurium.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.141-147
• /
• 2003

Sputter-deposited Nb-Al-Cr alloys. $3-5{\mu}m$ thick, have been prepared on quartz substrates as oxidation-and sulfidation-resistant materials at high temperatures. The oxidation or the alloys in the $Ar-O_2$ atmosphere of an oxygen partial pressure of 20 kPa follows approximately the parabolic rate law, thus being diffusion controlled. Their oxidation rates are almost the same as or even lower than those ofthc typical chromia-forming alloys. The multi-lavered oxide scales are formed on the ternary alloys. The outermost layer is composed of $Cr_2O_3$, which is"mainly responsible for the high oxidation'resistance of these alloys. In contrast to sputter-deposited Cr-Nb binary alloys reported previously, the inner layer is not porous. TEM observation as well as EDX analysis indicates that the innermost layer is a mixture of $Al_2O_3$ and niobium oxide. The dispersion of $Al_2O_3$ in niobium oxide may be attributable to the prevention of the formation of the porous oxide layer. The sulfidation rates of the present ternary alloys arc higher than those of the sputter-deposited Nb-AI binary alloys, but still several orders of magnitude lower than those of conventional high temperature alloys. Two-layered sulfide scales are formed, consisting of an outer $Al_2S_3$ layer containing chromium and an inner layer composed of $NbS_2$ and a small amount of $Cr_2S_3$. The presence of $Cr_2S_3$ in the inner protective $NbS_2$ layer may be attributed to the increase in the sulfidation rates.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.04c
• /
• pp.6-6
• /
• 1994

Har dmaterials such as cemented carbides with or without coated layer, cermets, ceramics and diamond or c-BN high pressure sintered compact are used for cutting tools, wear -resistant parts, rock drilling bits and/or high pressure vessels. These hardmaterials contain not only hard phase, but also second consituent as the element for forming ductile phase and/or sintering aid, and the mechanical properties of each material depend on (1) the amount of the second constituent as well as (2) the grain size of the hard phase. The hardness of each material mainly depends on these two factors. The fracture strength, however, largely depends on other microstructur a1 factors as well as the above two factors. For all hardmaterials, the fracture strength is consider ably affected by (3) the size of microstructur a1 defect which acts as the fracture source. In cemented carbides, the following factors which are generated mainly due to the addition of the second constituent are also important; (4) the variation of the carbon content in the normal phase region free from V-phase and graphite phase, (5) the precipitation of $Co_3$ during heating at about $800^{\circ}C$,(6) the domain size of binder phase, and (7) the formation of ${\beta}$-free layer or Co-rich layer near the surface of sintered compacts. For cemented carbides coated with thin hard substance, the important factors are as follows; (8) the kind of coated substance, (9) the formation of ${\eta}$-phase layer at the interface between coated layer and substrate, (10) the type of residual stress (tension or compression) in the coated layer which depends on the kind of coating method (CVD or PVD), and (11) the properties of the substrate, and (12) the combination, coherency and periodicity of multi-layers. In the lecture, the details of these factors and their effect on the strength will be explained.