• Journal of Microbiology and Biotechnology
• /
• v.32 no.6
• /
• pp.681-698
• /
• 2022

The Nile tilapia Oreochromis niloticus, Atlantic salmon Salmo salar, rainbow trout Oncorhynchus mykiss, olive flounder Paralichthys olivaceus, common carp Cyprinus carpio, grass carp Ctenopharyngodon idella and rohu carp Labeo rohita are farmed commercially worldwide. Production of these important finfishes is rapidly expanding, and intensive culture practices can lead to stress in fish, often reducing resistance to infectious diseases. Antibiotics and other drugs are routinely used for the treatment of diseases and sometimes applied preventatively to combat microbial pathogens. This strategy is responsible for the emergence and spread of antimicrobial resistance, mass killing of environmental/beneficial bacteria, and residual effects in humans. As an alternative, the administration of probiotics has gained acceptance for disease control in aquaculture. Probiotics have been found to improve growth, feed utilization, immunological status, disease resistance, and to promote transcriptomic profiles and internal microbial balance of host organisms. The present review discusses the effects of single and multi-strain probiotics on growth, immunity, heamato-biochemical parameters, and disease resistance of the above-mentioned finfishes. The application and outcome of probiotics in the field or open pond system, gaps in existing knowledge, and issues worthy of further research are also highlighted.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.500-510
• /
• 2023

In this study, lactic acid bacteria were isolated from 21 top-selling probiotic products on Korean market and their antimicrobial resistance were analyzed. A total 152 strains were claimed to be contained in these products and 70 isolates belonging to three genera (Bifidobacterium, Lactobacillus, and Lactococcus) were obtained from these products. RAPD-PCR showed diversity among isolates of the same species except for two isolates of Lacticaibacillus rhamnosus from two different products. The agar dilution method and the broth dilution method produced different MICs for several antimicrobials. With the agar dilution method, five isolates (three isolates of Bifidobacterium animalis subsp. lactis, one isolate of B. breve, one isolate of B. longum) were susceptible to all nine antimicrobials and 15 isolates were multi-drug resistant. With the broth microdilution method, only two isolates (one isolate of B. breve and one isolate of B. longum) were susceptible while 16 isolates were multi-drug resistant. In this study, only two AMR genes were detected: 1) lnu(A) in one isolate of clindamycin-susceptible and lincomycin-resistant Limosilactobacillus reuteri; and 2) tet(W) in one tetracycline-susceptible isolate of B. longum B1-1 and two tetracycline-susceptible isolates and three tetracycline resistant isolates of B. animalis subsp. lactis. Transfer of these two genes via conjugation with a filter mating technique was not observed. These results suggest a need to monitor antimicrobial resistance in newly registered probiotics as well as probiotics with a long history of use.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.447-460
• /
• 2017

The purpose of this study is to investigate the factors affecting consumer resistance of smart watches, focusing on consumer groups. SPSS 19.0 was used to conduct a descriptive analysis and multi regression analysis of the data. This study is based on the questionnaire data of 407 consumers. The results of this study are as follows. First, the relative advantage was identified as a factor in reducing consumer resistance across all gender and age groups. Second, complexity has been identified as a factor that increases the consumer resistance of female consumers, and consumer groups in their 20s and 40s. Third, esthetics was found to reduce consumer resistance in men, women, and the consumer group in their 20s. Fourth, subjective norms were identified as a factor reducing consumer resistance in women and in consumer groups in their 20s and 30s. Fifth, the risk of privacy was identified as a factor in increasing consumer resistance in men and the consumer group in their 40s. The results of this study can be helpful to understand consumer resistance to smartwatches.

• Journal of Veterinary Science
• /
• v.25 no.5
• /
• pp.62.1-62.13
• /
• 2024

Importance: Antimicrobial resistance (AMR) is a serious public health threat. AMR bacteria and their resistance determinants in food can be transmitted to humans through the food chain and by direct contact and disseminate directly to the environment. Objective: This study examined the AMR characteristics and transferable R plasmids in Escherichia coli isolated from meat ducks raised in an open-house system. Methods: One hundred seventy-seven (n = 177) commensal E. coli were examined for their antimicrobial susceptibilities and horizontal resistance transfer. The plasmids were examined by PCR-based plasmid replicon typing (PBRT) and plasmid multi-locus sequence typing (pMLST). Results: The highest resistance rate was found against ampicillin (AMP, 83.0%) and tetracycline (TET, 81.9%), and most isolates exhibited multidrug resistance (MDR) (86.4%). The R plasmids were conjugally transferred when TET (n = 4), AMP (n = 3), and chloramphenicol (n = 3) were used as a selective pressure. The three isolates transferred resistance genes either in AMP or TET. The blaCTX-M1 gene resided on conjugative plasmids. Five replicon types were identified, of which Inc FrepB was most common in the donors (n = 13, 38.4%) and transconjugants (n = 16, 31.2%). Subtyping F plasmids revealed five distinct replicons combinations, including F47:A-:B- (n = 2), F29:A-:B23 (n = 1), F29:A-:B- (n = 1), F18:A-B:- (n = 1), and F4:A-:B- (n = 1). The chloramphenicol resistance was significantly correlated with the other AMR phenotypes (p < 0.05). Conclusions and Relevance: The meat ducks harbored MDR E. coli and played an important role in the environmental dissemination of AMR bacteria and its determinants. This confirms AMR as a health issue, highlighting the need for routine AMR monitoring and surveillance of meat ducks.

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.472-476
• /
• 2008

The surface region of commercial stainless steel 304 and 316 plates has been modified through deposition of the multi-layered coatings composed of titanium film ($0.1{\mu}m$) and gold film ($1-2{\mu}m$) by an electron beam evaporation method. XRD patterns of the stainless steel plates deposited with conductive metal films showed the peaks of the external gold film and the stainless steel substrate. Surface microstructural morphologies of the stainless steel bipolar plates modified with multi-layered coatings were observed by AFM and FE-SEM images. The stainless steel plates modified with $0.1{\mu}m$ titanium film and $1{\mu}m$ gold film showed microstructure of grains of under 100 nm diameter. The external surface of the stainless steel plates deposited with $0.1{\mu}m$ titanium film and $2{\mu}m$ gold film represented somewhat grain growth of Au grains in FE-SEM image. The electrical resistance and water contact angle of the stainless steel bipolar plates modified with multi-layered coatings were examined with the thickness of the gold film.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.289-297
• /
• 2011

Objectives: To estimate the microbial contaminant load discharged from livestock farms, we randomly selected livestock farmers of cattle, swine, and fowl and collected bacterial strains from domestic animals' feces and compost samples. Recently, as multi-antibiotic-resistant bacteria and super bacteria showing resistance to a variety of antibiotics have been reported one after another, the ecological and health hazard of antibiotic-resistant bacteria is emerging as an important issue. Methods: Monitored indicator microorganism constituents were totak coliform (TC), fecal coliform (FC), and aerobic bacteria. The multi-antibiotic-resistant bacteria were identified from investigated indicator microorganisms by 16S rRNA sequencing. Results: By microbiological analysis, the largest population of aerobic bacteria ($1.5{\times}10^5$ CFU/g) was found in cattle fecal compost, and total coliforms ($1.1{\times}10^7$ CFU/g) and fecal coliforms ($1.0{\times}10^5$ CFU/g) were found primarily in swine fecal compost, while the lowest population was found in fowl fecal compost. Among the 67 strains separated from aerobic bacteria, five strains expressing high antibiotic resistance were selected in each sample. We found the multi-antibiotic resistant strains to be Shigella boydii, Staphylococcus lentus, Acinetobacter sp. and Brevibacterium luteolum. Conclusions: These results suggest that increasing numbers of multi-antibiotic-resistant bacteria in the environment have a close relation to the reckless use of antibiotics with livestock.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.352-356
• /
• 2011

Transparent conducting oxide films like ITO/Au/ITO and AZO/Au/AZO were fabricated with a sputter at a low-temperature of less then $70^{\circ}C$ and their crystallization and opto-electrical properties were studied. X-ray diffractiometry showed that single-ITO layer was amorphous, whereas, ITO of ITO/Au/ITO multi-layer was crystal. The ITO crystallization and its orientation depended on Au crystallization. Surface roughness of the ITO-multi-layers were in the range of 29-88% of that of ITO-single layer. ITO on amorphous gold layer had more rough surface than ITO on crystal gold. The gold layer between ITO improved electrical conductivity. Carrier density, mobility, resistivity and sheet resistance of ITO-single layer were $2.3{\times}10^{19}/cm^3$, $85{\times}cm^2$/Vs, $31{\times}10^{-4}{\Omega}cm$, and $310{\times}{\Omega}/cm^2$, respectively. Those of ITO/Au/ITO-multi-layers depended on Au-interlayer-thickness, which were in the range of $3.6{\times}10^{19}{\sim}4.2{\times}10^{21}/cm^3$, $43{\sim}85cm^2$/Vs, $0.17{\times}10^{-4}{\sim}25{\times}10^{-4}{\Omega}cm$, and $1.7{\sim}20{\times}{\Omega}/cm^2$, respectively. The sheet resistances of the single-layer ITO and the multi-layer ITO were 310 and $2.7{\sim}21{\Omega}/cm^2$, respectively. That of AZO/Au/AZO was $8.6{\Omega}/cm^2$, which was better than the single-layer ITO.

• Steel and Composite Structures
• /
• v.33 no.6
• /
• pp.767-776
• /
• 2019

In this article, a simple and robust multi-objective assessment method to control design angles and node positions connected among steel outrigger truss members is proposed to approve both structural safety and economical cost. For given outrigger member layouts, the present method utilizes general-purpose prototypes of outrigger members, having resistance to withstand lateral load effects directly applied to tall buildings, which conform to variable connecting node and design space deposition. Outrigger layouts are set into several initial design conditions of height to width of an arbitrary given design space, i.e., variable design space. And then they are assessed in terms of a proposed multi-objective function optimizing both minimal total displacement and material quantity subjected to design impact factor indicating the importance of objectives. To evaluate the proposed multi-objective function, an analysis model uses a modified Maxwell-Mohr method, and an optimization model is defined by a ground structure assuming arbitrary discrete straight members. It provides a new robust assessment model from a local design point of view, as it may produce specific optimal prototypes of outrigger layouts corresponding to arbitrary height and width ratio of design space. Numerical examples verify the validity and robustness of the present assessment method for controlling prototypes of outrigger truss members considering a multi-objective optimization achieving structural safety and material cost.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.464-469
• /
• 1999

Recently, the need for designing multi-stage gear drive has been increased as the hear drives are used more in the applications with high-speed and small volume. The design of multi-stage gear drives includes not only dimensional design but also configuration design of various machine elements. Until now, however, the researches on the design of gear drives are mainly focused on the single-stage gear drives and the design practices for multi-stage gear drives, especially in configuration design activity, mainly depend on the experiences and 'sense' of the designer by trial and error. We propose a design algorithm to automate the dimension design and the configuration design of multi-stage gear drives. The design process consists of four steps. The number of stage should be determined in the first step. In second step, the gear ratios of each reduction stage are determined using random search, and the ratios are basic input for the dimension design of gears, which is performed by the exhaustive search in third step. The designs of gears are guaranteed by the pitting resistance and bending strength rating practices by AGMA rating formulas. In configuration design, the positions of gears are determined to minimize the volume of gearbox using simulated annealing algorithm. The effectiveness of the algorithm is assured by the design example of a 4-stage gear drive.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.7-11
• /
• 2015

In this study, $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film were prepared on glass substrate by DC/RF magnetron sputtering method. To prevent interfacial reaction between Ag and ITO layer, Ti buffer layer was inserted. Optical properties and sheet resistance were studied depending on laminating times of each multi-layered film especially in visible ray. The simulation program, EMP (essential macleod program), was adopted and compared with experimental data to expect the experimental result. It was found out that the transmittance of the first stacked $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film was more than 90%. However, with increasing stacking times, the optical properties of $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film get worse. Consequently, Ti layer is good for oxidation barrier, but too many uses of this layer may have an adverse effect to optical properties of TCO film.