• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.225-227
• /
• 2004

• Journal of Sensor Science and Technology
• /
• v.27 no.3
• /
• pp.186-191
• /
• 2018

Smart textile industries have been precipitously developed and extended to electronic textiles and wearable devices in recent years. In particular, owing to an increasingly aging society, the elderly healthcare field has been highlighted in the smart device industries, and pressure sensors can be utilized in various elderly healthcare products such as flooring, mattress, and vital-sign measuring devices. Furthermore, elderly healthcare products need to be more lightweight and flexible. To fulfill those needs, textile-based pressure sensors is considered to be an attractive solution. In this research, to apply a textile to the second layer using a pressure sensing device, a novel type of conductive textile was fabricated using vapor phase polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT). Vapor phase polymerization is suitable for preparing the conductive textile because the reaction can be controlled simply under various conditions and does not need high-temperature processing. The morphology of the obtained PEDOT-conductive textile was observed through the Field Emission Scanning Electron Microscope (FESEM). Moreover, the resistance was measured using an ohmmeter and was confirmed to be adjustable to various resistance ranges depending on the concentration of the oxidant solution and polymerization conditions. A 3-layer 81-point multi-pressure sensor was fabricated using the PEDOT-conductive textile prepared herein. A 3D-viewer program was developed to evaluate the sensitivity and multi-pressure recognition of the textile-based multi-pressure sensor. Finally, we confirmed the possibility that PEDOT-conductive textiles could be utilized by pressure sensors.

• Journal of Surface Science and Engineering
• /
• v.49 no.2
• /
• pp.211-217
• /
• 2016

Boride coating applied on steam turbine parts of power plants has provided good particle erosion resistance under temperature of $550^{\circ}C$, but it isn't able to protect the parts effectively any more in ultra super critical (USC) steam turbine which is being operated up to temperature of $650^{\circ}C$. To ensure stable durability for USC steam turbine parts, an alternative coating replacing boride coating should be developed. In this study, multi-component boride coatings containing elements such as chromium (Cr) and vanadium (V) were formed on base metal (B50A365B) using thermochemical treatment method called by pack cementation. The thermochemical treatments involve consecutive diffusion of boron(B) and Cr or/and V using pack powders containing diffusion element sources, activators and diluents. The top layer of Cr-boride coating is primarily consisted of $Cr_2B_3$ and $Cr_5B_3$, while that of V-boride coating is mostly consisted of $VB_2$ and $V_2B_3$. The (Cr,V)-boride coating is consisted of $Cr_2B_3$, $Cr_5B_3$ and $V_2B_3$ mostly. The top surfaces of 3 multi-component boride coatings show hardness of $3200-3400H_v$, which is much higher than that of boride, about $1600-2000H_v$. In 5 wt.% NaCl solution immersion tests, the multi-component boride coatings show much better corrosion resistance than boride coating.

• Steel and Composite Structures
• /
• v.41 no.5
• /
• pp.663-679
• /
• 2021

To elucidate the differences in the collapse behavior between a single-story beam-column assembly and multi-story frame, two 1/3-scale two-bay composite frames, including a single-story composite beam-column assembly and a three-story composite sub-frame, were designed and quasi-statically tested. The load-displacement responses, failure modes, and internal force development of the two frames were analyzed and compared in detail. Furthermore, the resistance mechanisms of the two specimens were explored, and the respective contributions of different load-resisting mechanisms to the total resistances were quantitatively separated to gain deeper insights. The experimental tests indicated that Vierendeel action was present in the two-dimensional multi-story frames, which led to an uneven internal force distribution among the three stories. The collapse resistance of TSDWA-3S in the flexural stage was not significantly increased by the structural redundancy provided by the additional story, as compared to that of TSDWA-1S. Although the development of the load response was similar in the two specimens at flexural stage, the collapse mechanisms of the multi-story composite frame were much more complicated than those of the single-story beam-column assembly, and the combined action between stories was critical in determining the internal force redistribution and rebalancing of the remaining structure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.7-15
• /
• 2010

Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The Cam nose part of the Automobile's Cam shaft is strongly bumped with rocker arm or valve-lift. Therefore abnormal wear such as unfair wear and early wear occur in the surface. This abnormal wear causes a defect that bad timing open and close actions of the engine valve happen in the combustion chamber so the fuel gas will be combustion imperfect. Therefore, the cam shaft demands high hardness and wear resistance. In this study, high frequency heat treatment has been accomplished while wear test for material SM53C.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.113-121
• /
• 2001

The use of a marker gene in a transformation process aims to give a selective advantage to the transformed cells, allowing them to grow faster and better, and to kill the non-transformed cells. In general, the selective gene is introduced into plant genome along with the genes of interest. In some cases, the marker gene can be the gene of interest that will confer an agronomic characteristic, such as herbicide resistance. In this review we list and discuss the use of the most common selective marker genes on plant transformation and the effects of their respective selective agents. These genes could be divided in categories according their mode of action: genes that confer resistance to antibiotics and herbicides; and genes for positive selection. The contention of the marker gene flow through chloroplast transformation is further discussed. Moreover, strategies to recover marker-free transgenic plants, involving multi-auto-transformation (MAT), co-transformation, site specific recombination and intragenomic relocation of transgenes through transposable elements, are also reviewed.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.501-506
• /
• 2004

Extended spectrum β-lactamase (ESBL) generated Enterobacteriaceae including Escherichia coli is responsible for resisting antibiotics, which is clinical problem. This study was performed to investigate the isolation rates of 111 strains having positive of VITEK ESBL test 111 ESBL-strains in each month and season and statistically to determine their patterns of antibiotic test. One hundred eleven ESBL-strains were collected among 1,688 strains of E. coli isolated from various clinical specimen of one general hospital in Busan during 2002 to 2003. Month rates of ESBL-strains were 0％ to 13.3％, while the seasonal rates were highest at autumns during two years. The resistance to ampicillin, cefazolin, azteronam, ceftriaxone, and cefepime were 100％ in 2002. In ampicillin and cefazolin the resistances were 100％ during the two years. There were significant differences of cefoxitin and piperacillin/tazobactam between the two years but not significant between specimens. Four groups were divided according to the pattern of resistance and then the highest group had 93∼100％ of the resistance to 8 drugs but not resistant to imipenem.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3577-3581
• /
• 2012

Small cell lung cancer (SCLC) is characterized by a short cell doubling time, rapid progression and early occurrence of blood-borne and lymph metastasis. The malignancy is the highest of all lung cancer types. Although SCLC has a relatively good initial response to chemotherapy as well as radiotherapy, relapse or disease progression may occur quickly after the initial treatment. Drug resistance, especially multi-drug resistance, is the most important cause of failure of SCLC chemotherapy. This article provides a brief update of research on mechanisms of drug resistance in SCLC and reversal strategies.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.114-116
• /
• 2003

The multi function sprayed coating is used for direct-heating, wear resistance and high bonding strength. The merits of surface direct-heating coatings are short warming time, low power consumption and better wear resistance that can be used in many organization parts. In this study, the surface direct-heating and wear resistance can be improved by spraying the proper materials on the surface $Al_2$O$_3$40%TiO$_2$ powder and Ni-20%Cr powder that had the properties of conduction and high wear resistivity are used in order to improve wear resistance, electrical properties and bonding strength.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.66-72
• /
• 1999

Local heating transportation pipe has sensor and return lines to detect water-leakage. There are impulse and resistance comparison measurement types for a water-leakage detection. The impulse type shows large detection error within a measurement range. Since the resistance comparison type can find a comparative accurate single water-leakage point in the measurement range of heating pipe, it has been used to detect water-leakages these days. However if the multi water-leakages are happened in the measurement range of transportation pipe. the resistance comparison type shows a detection error point by the parallel resistance between a detection sensor line and ground. But the detection error will be minimized by the divided transportation pipe loops. In this research, it suggests the design of remote controlled detection system which can divide a large pipe loop and a possible single water-leakage measurement process in each divided loops.