• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.51-56
• /
• 2014

Thesedays, there are many smart device applications developed, especially on the using various sensors included in the smart device. Smart devices have several sensors which are camera, GPS, mike, and communication module for collecting ubiquitous environment, and many applications are developed by using such sensors. In this paper, we developed the multimedia stream architecture and examined the smart device applications based on open source with front and back-end server clouds for developing the conceptual architecture. Also, we examined the back-end distributed servers, realtime multimedia stream transferring, multi-media store, and media relay for other server and smart devices. We test the examined architecture on the real target environment to collect the SIP initial setup time, media stream delay, and end-to-end play time. The test results show that there have good network operation environment to provide realtime multimedia services, and we need to improve the end-to-end play time by minimizing the initial setup time.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.270-281
• /
• 2003

ETF made the RFCs of MPLS technologies for providing the QoS of ATM or Frame Relay and the flexibility&scalability of IP on the Internet services. IETF has been expanding MPLS technologies as a common control component for supporting the various switching technologies called GMPLS. Also, IETF has standardized the signaling protocols based on such technologies, such as LDP, CR-LDP and RSVP-TE. ETRI developed the MPLS system based on ATM switch in order to provide more reliable services, differentiated services and value-added services like the VPN and traffic engineering service on the Korea Public Sector network. We are planning on deploying model services and commercial services on that network. This paper explains the basic functions of LDP, design and development of LDP on our system, and compares with LDP development and operation on other MPLS systems made by Cisco, Juniper, Nortel and Riverstone. In conclusion, this paper deduces the future services and applications by LDP through these explanation and comparison.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.68-80
• /
• 2013

This study is about expressive aspects of subversive mimesis found in architectural design under 2nd Modernity. Architectural works under 2nd Modernity are described based on pseudo-scientific positivism and philosophical ontology of Deleuze. However, subversiveness found in works of arts by architects such as Rem Koolhaas present a few complexities to relay on such a description. This is about 'subversiveness' which absorbs the positive and negative factors of modernity which has been multi-layered as 'cultural capital'. This study aims to identify meta-phenomenon as well as the specific correlations between expression and purposes of any work of art that is presented in the form of subversiveness. To achieve this aim, this study approached with the concepts of appropriation and detournment based on Adorno's subversive mimesis concept. Meta-phenomena of architectural design methods occur from relations of three, which are social reality, artist, and work of art. This was connected to productivity of mimesis practice of self-reference and self-examination, which was then, summed up from the perspectives of appropriation in pure arts and d$\acute{e}$tournment of situationalists. Based on this work, subversive expressive characteristics of architecture under 2nd Modernity were framed from the perspectives of the absorption of cultural capital, reflection and negation, autonomy, instrumentality, and meta properties. In this way, this study found that Adorno's subversiveness should be effective for creative and methodological systemization in terms of interpretation of cognition, practice, and effect after materialization.

• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1196-1203
• /
• 2013

In general, the cost of transceiver for wireless network configuration is more expensive than that for wired network. However, in case of environmental management system in a tunnel, the cost can be minimized by adopting low rate tranceiver because the amount of the exchanged data for tunnel monitoring is very small. When the obtained data from sensor node is sent directly to the corresponding command node, there is no need to consider routing problem of the data transfer. However in this case, sensor nodes are required to be implemented with high power transmitter and experience high energy consumption. To tackle this problem, relay nodes can be used to transfer the data of tunnel monitoring, and suitable routing protocols for selecting optimum path are needed. Therefore, in this paper, we propose a routing algorithm and a self-configuration protocol for environment management system in tunnel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.506-514
• /
• 2009

To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.711-723
• /
• 2017

This paper proposes a flight control system for an organic flight array(OFA) which has a new configuration to consist of multi modularized ducted-fan unmanned aerial vehicles (UAVs). The OFA is able to apply to various missions such as indoor reconnaissance, communication relay, and radar jamming by using capability of hover flight. The OFA has a distinguished advantage due to reconfigurable structure to assemble or separate with respect to its missions or operational conditions. A dynamic modelling of the OFA is derived based on equations of motion of the single ducted-fan modules. In order to apply nonlinear control method, an affine system of attitude dynamics is derived. Moreover, the control system is composed of a back-stepping controller for attitude control and a PID controller for position control. Then the performance of the proposed controller is verified via a numerical simulation under wind disturbance.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.39.2-39.2
• /
• 2010

In this paper, I present the domestic development of near infrared camera systems for the ground telescope and the space satellite. These systems are the first infrared instruments made for astronomical observation in Korea. KASINICS (KASI Near Infrared Camera System) was developed to be installed on the 1.8m telescope of the Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. KASINICS is equipped with a $512{\times}512$ InSb array enable L band observations as well as J, H, and Ks bands. The field-of-view of the array is $3.3'{\times}3.3'$ with a resolution of 0.39"/pixel. It employs an Offner relay optical system providing a cold stop to eliminate thermal background emission from the telescope structures. From the test observation, limiting magnitudes are J=17.6, H=17.5, Ks=16.1 and L(narrow)=10.0 mag at a signal-to-noise ratio of 10 in an integration time of 100 s. MIRIS (Multi-purpose InfraRed Imaging System) is the main payload of the STSAT-3 in Korea. MIRIS Space Observation Camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}{\times}3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI of 30 layers, and GFRP pipe support in the system. Opto-mechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform the Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.992-1003
• /
• 2007

In this paper, a channel estimation technique based on pilot tones, which does not degrade channel estimation performance even with the existence of symbol timing offset (STO) in OFDM systems, is proposed. The proposed technique performs channel estimation by interpolating channels with respect to amplitude and phase with a minimum computational complexity, differently from the conventional interpolation techniques. The proposed technique requires neither the estimation of fine STO in advance nor trigonometric operation for phase interpolation, signifying a significant reduction in computational complexity. Since the performance of the proposed technique does not depend on the STO present in OFDM systems. It can be directly applied to the following areas in OFDM-based communication system: elimination of fine STO estimation step in the synchronization procedure, elimination of STO estimation step in multiuser uplink, and channel estimation in multi-hop relay system. It is verified by computer simulation that the proposed technique can improve the performance of channel estimation significantly in the presence of STOs, compared with previous channel estimation techniques based on pilot tones.

• Journal of KIISE:Information Networking
• /
• v.33 no.5
• /
• pp.369-379
• /
• 2006

In recent years, there have been many researches about Ad-hoc Networks which is available to communicate freely between mobile devices by using multi-hop without any support of relay base or access point. TCP that used the most widely transport protocol in the Internet repeats packet loss and retransmission because it increases congestion window size by using reactive congestion control until packet loss occurs. As a result of this, energy of mobile device is wasted unnecessarily. In this paper, we propose TCP-New Veno in order to improve the energy efficiency of mobile device. According to the state of network, the scheme adjusts appropriate size of congestion window. Therefore, the energy efficiency of mobile device and utilization of bandwidth are improved by the scheme. From the simulation by using ns-2, we could see more improved energy efficiency with TCP-New Veno than those with TCP in Ad-hoc Networks.