• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.397-403
• /
• 2015

In this paper, a method of ISAR geometric calibration is represented by using impulse-radio UWB radar. The ir-UWB is good for using a signal processing in time domain, so, it does not occur a multi-path or coupling problem. If a signal that between antennas and target is assumed a plane wave, a center of rotation in ISAR geometry model can be estimated by using point target. Before image is reconstructed with sinogram, the center of rotation can be calculated by using least square fitting. This method can be obtained a more contrast image, and a maximum value of entropy of image. The method, that estimates a center of rotation in received data, will be used a initial setup of instruments or a periodic compensation to reconstruct image. It would be useful in medical, security and surveillance imaging equipments that have a fixed geometry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.224-231
• /
• 2003

In this paper we proposed system parameter values of ultra-wideband Impulse Radio systems for the frequency band(3.1~10.6GHz), which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the multiple access interference environment. According to result, application of possible pulse duration($t_{n}$) is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of the same pulse signal power, we could know that system performance was changed by pulse repetition number($N_{s}$ ) regardless of pulse duration. Thus, We could know that we have to need duration of monocycle pulse and setting of frame un it time(Τ$_{f}$ ) according to multi user numbers and design proper pulse repetition number by transfer rate in multiple access systems design. In the IR system that needs high speed transmission more than 50 Mbps in multiple access interference environment, we could know that very serious performance decrease by multiple access interference happens. Therefore, as the design of high speed multiple access IR system, it should be designed to additional improvement techniques that can remove multiple access interference at the same time.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.162-168
• /
• 2012

This paper considers the scenario in which a set of nodes share a common channel. Some nodes have a rechargeable battery and the others are plugged to a reliable power supply and, thus, have no energy limitations. We consider two source-destination pairs and apply the concept of cognitive radio communication in sharing the common channel. Specifically, we give high-priority to the energy-constrained source-destination pair, i.e., primary pair, and low-priority to the pair which is free from such constraint, i.e., secondary pair. In contrast to the traditional notion of cognitive radio, in which the secondary transmitter is required to relinquish the channel as soon as the primary is detected, the secondary transmitter not only utilizes the idle slots of primary pair but also transmits along with the primary transmitter with probability p. This is possible because we consider the general multi-packet reception model. Given the requirement on the primary pair's throughput, the probability p is chosen to maximize the secondary pair's throughput. To this end, we obtain two-dimensional maximum stable throughput region which describes the theoretical limit on rates that we can push into the network while maintaining the queues in the network to be stable. The result is obtained for both cases in which the capacity of the battery at the primary node is infinite and also finite.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.77-86
• /
• 2010

In this paper, we present a noncoherent IR-UWB (Impulse Radio-Ultra Wide Band) ranging system with an AFE (Analog Front End) composed of a simple integrator and an 1-bit ADC (Analog-to-Digital Converter), and define AFE characteristics affecting the ranging performance. This system is realistic and easy to implement, since the integrator simply accumulates signal energies and the simple 1-bit ADC is applied instead of the multi-bit ADCs for coherent IR-UWB systems. On the other hand, its ranging accuracy is largely affected channel environments such as noise, multipath fading and so on, since the noncoherent receiver simply squares and integrates the received signals. However, despite these practical importances, there are few conventional researches on the performance analysis according to AFE characteristics in IR-UWB ranging systems. To this end, we analyze in this paper ranging performance according to AFE characteristics for the noncoherent IR-UWB ranging system in various wireless channel environments, and through these results we also present system parameters to be considered in UWB hardware designs.

• Archives of design research
• /
• v.12 no.4
• /
• pp.201-209
• /
• 1999

Feb. 11. 1997, Korean Government announced FM Radio Broadcasting and TV Terrestrial TV Broadcasting will be changed to digital format in year 2001, and all Korean Broadcasting except AM Radio and Microwave will be changed to digital format before 2010. In spite of IMF economic crisis, the Digitizing is the one of the hot issue in TV Broadcasting area. The narrow view of the Digitizing the Broadcasting is a technical development from the analogue to digital, but the extended view of it means not only the technical development but the revolution in the concept of TV and service area, relationship between sender and receiver, structure of TV Industry. Thus Digitizing the Broadcasting shifts paradigm and eventually it cause a big change in the advertising creative. The digital TV could be a very encouraging technical development for the consumers convenience because of the multiple choice in the channels and interactive services which leads us to the multimedia service through the TV . On the other hand, multimedia and multi-channel, interactivity implicate a big uncertainty and risk, This research paper is about the technical aspects and social aspects of digital TV and its influence of the marketing and TV advertising creative.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.879-881
• /
• 2010

For the rapid development of society, such as small family, one-people family is following. The traditional family is being changed, so the older stay home alone. That makes it more and more. Staying home alone, the older's health and safety are worth considering by us. With the rapid development of RFIDRadio Frequency Identification) technology, its applications have extended to all areas of our lifes. RFIDRadio Frequency Identification) has became a major topic of concern in multi-industry. With the high-speed economic growth and the development of science, medicine, the old people's life expectancy is increasing slightly. So it is necessary to design a protective system for the older's safety. In this thesis, self-care system is made by using RFID(Radio Frequency Identification) technology to authenticate an user and using TTS(test to speech) to convert character information to voice information and also using infrared radiation technology to protect home effectively, and using e-blood pressure monitors to examination the older's bodies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.917-926
• /
• 2019

At present, TICN has been developed and distributed for military command control. TICN is known as the 3.5G mobile communication technology based on WiBro, which shows technical limitation in the field operation situation. Accordingly, the drone-type base station platform is attracting attention as an alternative to overcome technical limitations such as difficulty in securing communication LoS and limiting expeditious network configuration. In this study, we performed simulation performance evaluation of drone-type base station operation in 28 GHz that is considered most suitable for cellular communication within mmWave frequency band. Specifically, we analyzed the changes in throughput and fairness performance according to radio resource management policies such as frequency reuse and scheduling in multi-cell topology. Through this, we tried to provide insights on the operation philosophy on drone-type base station.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.106-114
• /
• 2021

The needs in terms of wireless communications are growing up both for civil and military applications. Therefore a constant improvement of this technology is required to meet customer wishes. One of its main shortcomings is the inefficient use of the spectrum in which a large part of the allocated bands of frequencies is unused. Since communication is crucial, spectrum shortage problems can lead a multi-national and coalition operation to failure. Cognitive Radio Networks (CRNs) are a promising technology which continuously analyses the spectrum searching for available frequencies. It can solve this spectrum issue by avoiding interferences, improving system-wide spectral efficiency, robustness to dynamic conditions and allowing more spectrum flexibility This paper specifically analyzed and presented the application of the CRNs in the military operational environment, and presented the appropriate method applicable to each actual operational situation.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.383-392
• /
• 2018

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.152-159
• /
• 2019

In general, a Doppler radar can measure only the velocity of a moving target. To measure the distance of a moving target, it is necessary to use a frequency-modulated continuous wave or pulse radar. However, the latter are very complex in terms of both hardware as well as signal processing. Moreover, the requirement of wide bandwidth necessitates the use of millimeter-wave frequency bands of 24 GHz and 77 GHz. Recently, a new kind of Doppler radar using multitone frequency has been studied to sense the distance of moving targets in addition to their speed. In this study, we show that distance sensing of moving targets is possible by adjusting only the frequency of a 2.4 GHz Doppler radar with low cost phase lock loop. In particular, we show that distance can be sensed using only alternating current information without direct current offset information. The proposed technology satisfies the Korean local standard for low power radio equipment for moving target identification in the 2.4 GHz frequency band, and enables multiple long-range sensing and radio-frequency identification applications.