• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.15-21
• /
• 2016

The elevator is an essential part of the transportation means in modern society. It has become the convenient movement means of vertical and horizontal mobilities for vulnerable citizens including the disabled or elderly in skyscrapers and the multi-purposes facilities. After the 1990s, the number of newly installed elevators have increased because of the establishment of large scale public houses which need an increase of means of transportation. Thus, the safety accident in the elevator has been currently in an increasing trend as years passed by because that the elevator is always exposed to the risk of accident. Most of the elevator accidents occur in the escalator and moving walkway. This study investigated the current usage situations of users at multi-purpose shopping spaces, the sub way, and the airport about the escalator including moving walkway. Moreover the accident types were analyzed for the escalator based on 10 years of statistics. And the methods for the accident prevention were proposed on the equipment, management and user side.

• Journal of the military operations research society of Korea
• /
• v.31 no.1
• /
• pp.42-57
• /
• 2005

Korea DM&S(Defence Modeling & Simulation) development plan includes construction of a distributed simulation model which enables us to construct, operate, integrate and connect war game simulations. US DoD and IEEE set the HLA/RTI as the standard of distributed simulation model. HLA/RTI models each simulator as a Federate and group of them as a Federation. Simulation with the model shows interoperability and finally executes a war game simulation. Because of different resolutions and features, it is not satisfied 'interoperability' and 'reusability' of simulation perfectly MRM (Multi Resolution Modeling) has been introduced, and many developed countries including the United States have studied the technology to simulate the model with different resolutions. This thesis proposes the need for introduction of MRM and analyzes both technical and operational validity when we apply MRM model to army war game simulations. For these purposes, we 1) find MRM main issues with the study about MRM basic concepts and case studies of MRM's applications, 2) present the need of MRM and its relation with DM&S development plan, and 3) analyze its technical and operational validity when we apply MRM to an example, CHANG-JO21 and JEON-TOO21.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.153-165
• /
• 2005

The main purpose of a spatial audio system is to give a listener the same impression as if he/she were present in a recorded environment. A dummy head microphone is generally used for such purposes. Because of its human-like shape, we can obtain good spatial sound images. However, its shape is a restriction on its public use and it is difficult to convert a 2-channel recording into multi-channel signals for an efficient rendering over a multi-speaker arrangement. In order to solve the problems mentioned above, a spatial audio system is proposed that uses multiple microphones on a rigid sphere. The system has five microphones placed on special points of the rigid sphere, and it generates audio signals for headphone, stereo, stereo dipole, 4-channel, and 5-channel reproduction environments. Subjective localization experiments show that front/back confusion, which is a common limitation of spatial audio systems using the dummy head microphone, can be reduced dramatically in 4-channel and 5-channel reproduction environments and can be reduced slightly in a headphone reproduction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.117-124
• /
• 2011

Tire's performance plays important roles in improving vehicle's performances. Tire makers carry out a lot of research to improve tire's performance. They are making effort to meet multi purposes using various optimization methods. Recently, the tire makers perform the shape optimization using approximation models, which are surrogate models obtained by statistical method. Generally, the reason why we increase sampling points during optimization process, is to get more reliable approximation models, but the more we adopt sampling points, the more we need time to test. So it is important to select approximation model and proper number of sampling points to balance between reliability and time consuming. In this research, we studied to compare two kind cases for a approximation construction. First, we compare RSM and Kriging which are Curve Fitting Method and Interpolation Method, respectively. Second, we construct approximation models using three different number of sampling points. And then, we recommend proper approximation model and orthogonal array adopt tire's design optimization.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.11-16
• /
• 2010

Methane hydrate is crystalline ice-like compounds which formed methane gas enters within water molecules composed cavity and each other from physically-bond at specially temperature and pressure condition. $1m^3$ of methane hydrate can be decomposed into the maximum of $216m^3$ of methane gas under standard condition. If these characteristics of hydrate are utilized in the opposite sense, natural gas can be fixed into water in the form of a hydrate solid. Therefore the use of hydrate is considered to be a great way to transport and store natural gas in large quantity. However, when methane hydrate is formed artificially, the amount of gas that is consumed is relatively low, due to the slow reaction rate between water and methane gas. Therefore for practical purposes in the application, the present investigation focuses on increasing the amount of gas consumed by adding chemically oxidized OMWCNTs to pure water. The results show that when 0.003 wt% of oxidation multi-walled carbon nanotubes was added to pure water, the amount of gas consumed was almost four times more than that of pure water indicating its effect in hydrate formation and the hydrate formation time decreased at alow subcooling temperature.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.73-80
• /
• 2017

PURPOSES : This paper presents a comparison study between dynamic and static analyses of falling weight deflectometer (FWD) testing, which is a test used for evaluating layered material stiffness. METHODS: In this study, a forward model, based on nonlinear subgrade models, was developed via finite element analysis using ABAQUS. The subgrade material coefficients from granular and fine-grained soils were used to represent strong and weak subgrade stiffnesses, respectively. Furthermore, the nonlinearity in the analysis of multi-load FWD deflection measured from intact PCC slab was investigated using the deflection data obtained in this study. This pavement has a 14-inch-thick PCC slab over fine-grained soil. RESULTS: From case studies related to the nonlinearity of FWD analysis measured from intact PCC slab, a nonlinear subgrade model-based comparison study between the static and dynamic analyses of nondestructive FWD tests was shown to be effectively performed; this was achieved by investigating the primary difference in pavement responses between the static and dynamic analyses as based on the nonlinearity of soil model as well as the multi-load FWD deflection. CONCLUSIONS : In conclusion, a comparison between dynamic and static FEM analyses was conducted, as based on the FEM analysis performed on various pavement structures, in order to investigate the significance of the differences in pavement responses between the static and dynamic analyses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1251-1256
• /
• 2014

The use of lubrication oil is of many purposes and one among them is to drive the engine mounted on a ship. Hence the supply of clean lubrication oil is important. And an oil purifier is one of key components in marine diesel engines. At present, the element type full-flow oil filter has been widely used for cleaning the engine oil. The self-driven centrifugal oil purifier is a device which is used to remove the impurities in lubrication oil using a jet flow. The flow characteristics and the physical behaviors of particles in this self-driven oil purifier were investigated numerically and the filtration efficiencies were evaluated. For calculations, a Computational Fluid Dynamics method is used and the Shear Stress Transport turbulence model has been adopted. The Multi Frames of Reference method is used to consider the rotating effect of the flows. The influence of centrifugal forcehas been numerically investigatedto improve filtration efficiency of tiny particles. As a result of this research, it was found that the particle filtration efficiency using the only center axis rotating and outer wall rotating system are higher than that of the fully rotating system in the self-driven oil purifier.

• Journal of Contemporary Eastern Asia
• /
• v.17 no.1
• /
• pp.68-93
• /
• 2018

With the emergence of partnerships with private actors in public and cultural diplomacies, complexity in the relations among the various stakeholders involved has arisen, and yet the relevant research is insufficient to shed any beneficial light on such issues. By looking at public-private partnerships, the present study determined that resource dependence, trust, and risk are the main factors affecting the feasibility of partnerships, and inductively developed propositions on their effects. In an explorative case study, Germany (decentralized mode of governance) and South Korea (centralized mode of governance) were compared as exemplary contrasting system designs. The results revealed that risk and trust are likely to affect the feasibility of partnerships, whereas resource dependence is not. The following additional findings also were made: (1) there are cultural actors in a 'for profit, but with non-profit purposes' sector; (2) an interpersonal level of trust positively affects partnerships; (3) 'taking risks' brings about 'innovation'; (4) the existence of international commonalities between any two cases depending on the actors' shared role, whether public or private; (5) public actors' emphasis on mutual trust, program budget and execution, innovations coming from taking risks, commitment and ownership, and unexpected situations; (6) private actors' consideration of 'publicness' and grant-seeking or financial support as important incentives, and their desire that public actors to show more trust, professionalism, and ownership with less control over budget execution. With its qualitative approach and in-depth analysis, the present study yielded new insights, notwithstanding the relatively small sample data.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.4
• /
• pp.155-160
• /
• 2003

In this study, an Alexandrite laser system for hair removal adopting a multi-discharge method in which three flash lamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. Specifically, this study demonstrates a technology that makes it possible to formulate various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC (program integrated circuit) one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and real-time control is possible with an external keyboard, enabling an assortment of pulse shapes. In addition, longer pulses can be more widely used for industrial processing as well as for numerous medical purposes.

• Computers and Concrete
• /
• v.10 no.4
• /
• pp.361-377
• /
• 2012

Four Reinforced Concrete (RC) single span structural walls having various opening sizes and locations were constructed and tested under lateral reversed cyclic loading at the structural laboratory of Kyoto University. These specimens were scaled to 40% and represented the lower three stories of a six-storied RC building. The main purposes of the experimental tests were to evaluate the shear behavior and to identify the influence of opening ratios on the cracks distribution and shear strength of RC structural walls. The shear strength of the specimens was estimated by combining the shear strength of structural wall without openings and the reduction factor that takes into account the openings. Experimental and analytical results showed that the shear strength was different depending on the loading direction due to opening locations. A two-dimensional finite element analysis was carried out to simulate the performance of the tested specimens. The constructed finite elements model simulated the lateral load-drift angle relations quite well.