• 제목/요약/키워드: multi-purpose space

검색결과 533건 처리시간 0.028초

이용자 행태 및 특성에 따른 어린이공원 시설 계획 방안에 관한 연구 (A Study on Children's Park Facility Planning Scheme according to User Behavior and Characteristics)

  • 이동훈;이석환;백기영
    • 한국산학기술학회논문지
    • /
    • 제17권12호
    • /
    • pp.232-241
    • /
    • 2016
  • 도시공원 중 어린이공원은 도시 내 다른 공원보다 접근성이 높아 이용자가 많으며 어린이들의 놀이공간만이 아닌 지역주민들의 휴식 및 여가생활공간으로도 이용되고 있다. 그러나 도시공원법에 의한 공학적구분에 따른 양적증가에 치중한 결과 다양한 계층의 이용자에 대한 고려가 미흡하다. 이에 본 연구는 단독주택지역과 공동주택지역의 어린이공원 이용실태를 분석하여 어린이공원 이용의 문제점과 향후 개선방향을 도출하고, 그 중 이용빈도가 높은 시설물의 종류를 파악하고자 한다. 이를 위해 문헌조사와 함께 사례조사를 병행하여 연구를 진행하였다. 우선 문헌조사를 통해 기존 어린이공원과 관련된 논문 및 연구보고서 등 자료를 바탕으로 이론적인 검토와 현황을 정리하였다. 다음으로 대상지 어린이공원의 공원관리 담당자의 면담과 현장답사를 통해 입지, 시설, 관리에 대한 현황을 파악하였다. 그 결과 어린이공원은 생활권 내 접근성이 높은 여가 공간으로 활용되고 있으며, 관찰결과 이용자 대부분 체류 시간이 1시간에서 2시간 이내인 것으로 나타났다. 특히 어린이의 이용자들 보다 고령층의 이용자가 높게 나타나는 것을 알 수 있었다. 따라서 앞으로 어린이공원을 계획하고 조성함에 있어서 미래지향적인 다목적 근린형 어린이공원에 따른 배치방식으로 계획하여 시설물을 설치하는 것이 바람직할 것으로 분석되었다.

복합 문서의 의미적 분해를 통한 다중 벡터 문서 임베딩 방법론 (Multi-Vector Document Embedding Using Semantic Decomposition of Complex Documents)

  • 박종인;김남규
    • 지능정보연구
    • /
    • 제25권3호
    • /
    • pp.19-41
    • /
    • 2019
  • 텍스트 데이터에 대한 다양한 분석을 위해 최근 비정형 텍스트 데이터를 구조화하는 방안에 대한 연구가 활발하게 이루어지고 있다. doc2Vec으로 대표되는 기존 문서 임베딩 방법은 문서가 포함한 모든 단어를 사용하여 벡터를 만들기 때문에, 문서 벡터가 핵심 단어뿐 아니라 주변 단어의 영향도 함께 받는다는 한계가 있다. 또한 기존 문서 임베딩 방법은 하나의 문서가 하나의 벡터로 표현되기 때문에, 다양한 주제를 복합적으로 갖는 복합 문서를 정확하게 사상하기 어렵다는 한계를 갖는다. 본 논문에서는 기존의 문서 임베딩이 갖는 이러한 두 가지 한계를 극복하기 위해 다중 벡터 문서 임베딩 방법론을 새롭게 제안한다. 구체적으로 제안 방법론은 전체 단어가 아닌 핵심 단어만 이용하여 문서를 벡터화하고, 문서가 포함하는 다양한 주제를 분해하여 하나의 문서를 여러 벡터의 집합으로 표현한다. KISS에서 수집한 총 3,147개의 논문에 대한 실험을 통해 복합 문서를 단일 벡터로 표현하는 경우의 벡터 왜곡 현상을 확인하였으며, 복합 문서를 의미적으로 분해하여 다중 벡터로 나타내는 제안 방법론에 의해 이러한 왜곡 현상을 보정하고 각 문서를 더욱 정확하게 임베딩할 수 있음을 확인하였다.

효과적인 재난 대응을 위한 3차원 BIM 기반 재난 통합정보 시스템 활용 서비스 제시 (A Study on the Application Service of 3D BIM-based Disaster Integrated Information System Management for Effective Disaster Response)

  • 김지은;홍창희
    • 한국산학기술학회논문지
    • /
    • 제19권10호
    • /
    • pp.143-150
    • /
    • 2018
  • 최근 국내외에서 연속적으로 발생하는 화재, 지진, 침수 등의 다양한 재난으로 인하여, 기존의 법제도 하에 최소한으로 도입되었던 단순 재난 대비 설비에서 벗어나 주기적이고 체계적인 시설물의 재난 관리의 중요성이 높아지고 있다. 효과적 재난 대비를 위해서는 정기점검/상시점검을 통해 일상에서도 관리되어야 하며 비상 발생 시에도 상황과 목적에 맞는 직관적이고 정확한 정보전달이 필수이다. 효과적 3차원 시각화 모델을 활용하여 객체(부재)에서 건물 전체 속성정보까지 관리할 수 있는 BIM 기술은 설계-준공에서 시설물 유지관리까지 관리 목적에 따라 다양한 활용이 가능하다. 본 연구는 BIM 기반 재난통합정보 시스템 내 시설물 관리 서비스 도출 프로세스 및 전문가 설문조사를 통해, 다양한 관련 서비스 가운데 BIM 데이터의 활용 가능한 분야를 시설물 정보관리/3차원 시각화/재난재해 관제 관점으로 정리하였다. 이후 BIM 기반 재난 통합정보시스템 내 활용 서비스 및 DB 정의를 통해, BIM 기반 주요 설비 모니터링 및 대응 서비스와 BIM 기반 공간관리 서비스 방안을 제시하였다. 본 연구를 바탕으로 재난 통합정보 시스템 내 BIM 기반 활용 서비스 기능을 구축함으로써, 기존 사람 중심의 정보 제공에서 BIM을 활용한 효과적인 시스템적 대응이 가능할 것으로 기대한다.

QA용 두부 팬톰을 이용한 Hitchcoke CT 및 혈관조영 정위적 시스템에 대한 정확도 평가 (Evaluation of Accuracy on Hitchcoke CT/angio localization system using QA head phantom)

  • 김성현;서태석;윤세철;손병철;김문찬;신경섭
    • 한국의학물리학회지:의학물리
    • /
    • 제9권1호
    • /
    • pp.1-9
    • /
    • 1998
  • 정위적 방사선 수술과 신경외과적 수술분야 에서는 상호보완적인 영상정보를 얻기 위하여 컴퓨터 단층촬영 (CT), 자기공명영상 (MRI) 그리고 혈관조영촬영이 사용된다. 본 연구의 목적은 여러 영상장치와 다목적 QA(Quality Control) 팬톰을 이용하면서, 정위적 방사선수술 및 신경외과적 수술분 야에서 두경부내의 병소에 대한 모양, 크기, 위치를 정확하게 결정하기 위한 3 차원 정위 시스템을 개발하는 것이다. 목표물의 정확한 위치를 정의하기 위하여, Hitchcoke 정위 프레임과 컴퓨터 단층 촬영 (CT)/혈관 조영촬영용 위치측정 보조기구들을 3차원 공간상에 9개의 목표물을 가진 팬톰에 고정하였다. 컴퓨터 단층촬영과 혈관 조영촬영을 이용하여 얻은 기하학적 팬톰의 영상들을 이용하여, 목표물의 3차원 정위좌표를 얻기위한 알고리즘이 개발되었다. 개발된 알고리즘에 의해 계산된 목표물들의 위치는 팬톰의 절대 좌표와 비교 되었고, 각 CT 영상에서의 목표물들은 뇌혈관촬영 영상위에 상호 중첩될 수 있도록 개발 되었다. 512$\times$512 메트릭스와 2mm 슬라이스 두께를 가진 컴퓨터 단층촬영에 있어서는 1.02$\pm$0.17 mm의 평균거리오차를 보였고, 혈관 조영촬영인 경우에는 0.41$\pm$0.05mm 의 평균거리오차를 보였다. 목표물의 위치를 결정하는데 있어서 결과로 나온 정확도는 개발된 시스템이 정위적 방사선수술과 신경외과적수술을 위해 충분히 신뢰성이 있음을 확인해주었다.

  • PDF

기능적 과제를 통한 다관절 관절위치감각 훈련이 뇌졸중 환자의 관절위치감각, 균형, 보행능력에 미치는 효과 (The Effects of Multi Joint-Joint Position Sense Training Using Functional Task on Joint Position Sense, Balance, Walking Ability in Patients With Post-Stroke Hemiplegia)

  • 고경희;최종덕;김미선
    • 한국전문물리치료학회지
    • /
    • 제22권3호
    • /
    • pp.33-40
    • /
    • 2015
  • The purpose of this study was to investigate the effect of multi joint-joint position sense (MJ-JPS) training on joint position sense, balance, and gait ability in stroke patients. A total of 18 stroke patients participated in the study. The subjects were allocated randomly into two groups: an experimental group and a control group. Participants in the experimental group received MJ-JPS training (10 min) and conventional treatment (20 min), but participants in the control group only received conventional treatment (30 min). Both groups received training for five times per week for six weeks. MJ-JPS is a training method used to increase proprioception in the lower extremities; as such, it is used, to position the lower extremities in a given space. MJ-JPS measurement was captured via video using a Image J program to calculate the error distance. Balance ability was measured using Timed Up and Go (TUG) and the Berg Balance Scale (BBS). Gait ability was measured with a 10 m walking test (10MWT) and by climbing four flights of stairs. The Shapiro-Wilk test was used to assess normalization. Within-group differences were analyzed using the paired t-test. Between-group differences were analyzed using the independent t-test. The experimental group showed a significant decrease in error distance (MJ-JPS) compared to the control group (p<.05). Both groups showed a significant difference in their BBS and 10MWT results (p<.05). The experimental group showed a significant decrease in their TUG and climbing results (p<.05), but the control group results for those two tasks were not found to be significant (p>.05). There was significant difference in MJ-JPS and by climbing four flights of stairs on variation of pre and post test in between groups (p<.05), but TUG and BBS and 10MWT was no significantly (p>.05). We suggest that the MJ-JPS training proposed in this study be used as an intervention to help improve the functional activity of the lower extremities in stroke patients.

Development of Semi-basement Type Greenhouse Model for Energy Saving

  • Kim, Seoung Hee;Joen, Jong Gil;Kwon, Jin Kyeong;Kim, Hyung Kweon
    • Journal of Biosystems Engineering
    • /
    • 제41권4호
    • /
    • pp.328-336
    • /
    • 2016
  • Purpose: The heat culture areas of greenhouses have been continuously increasing. In the face of international oil price fluctuations, development of energy saving technologies is becoming essential. To save energy, auxiliary heat source and thermal insulation technologies are being developed, but they lack cost-efficiency. The present study was conducted to save energy by developing a conceptually new semi-basement type greenhouse. Methods: A semi-basement type greenhouse, was designed and constructed in the form of a three quarter greenhouse as a basic structure, which is an advantageous structure to inflow sunlight. To evaluate the performance of the developed greenhouse, a similar structured general greenhouse was installed as a control plot, and heating tests were conducted under the same crop growth conditions. Results: Although shadows appeared during the winter in the semi-basement type greenhouse due to the underground drop, the results of crop growth tests indicated that there were no differences in crop growth and development between the semi-basement type greenhouse and the control greenhouse, indicating that the shadows did not affect the crop up to the height of the crop growing point. The amount of fuel used for heating from January to March was almost the same between the two greenhouses for tests. The heating load coefficients of the experimental greenhouses were calculated as $3.1kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the semi-basement type greenhouse and $2.9kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the control greenhouse. Since the value is lower than the double layer PE (polyethylene) film greenhouse value of $3.5kcal/m^2{\cdot}^{\circ}C{\cdot}h$ from a previous study, Tthe semi-basement type greenhouse seemed to have energy saving effects. Conclusions: The semi-basement type greenhouse could be operated with the same fuel consumption as general greenhouses, even though its underground portion resulted in a larger volume, indicating positive effects on energy saving and space utilization. It was identified that the heat losses could be reduced by installing a thermal curtain of multi-layered materials for heat insulation inside the greenhouse for the cultivation of horticultural products by installing thermal curtain of multi-layered materials for heat insulation inside the greenhouse, it was identified that the heat losses could be reduced.

역도 인상동작 성공 시 최대 바벨무게 예측 (The Forecasting a Maximum Barbell Weight of Snatch Technique in Weightlifting)

  • 하종규;류지선
    • 한국운동역학회지
    • /
    • 제15권3호
    • /
    • pp.143-152
    • /
    • 2005
  • The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

외국인 밀집지역에서의 에스닉 커뮤니티의 형성 -대구시 달서구를 사례로- (Formation of Ethnic Community the Concentrated Settlement of Foreign Workers : A Case Study of Igok-Dong, Dalseo-Gu, Daegu)

  • 조현미
    • 한국지역지리학회지
    • /
    • 제12권5호
    • /
    • pp.540-556
    • /
    • 2006
  • 본 연구에서는 대구시 달서구 미곡동이라는 대도시의 일각에서 나타나는 세계화의 단면을 외국인 노동자들의 밀집거주지역에서 형성되는 에스닉 커뮤니티를 통하여 분석하고 있다. 선행연구에서 제시하는 바와 같이, 에스닉 커뮤니티는 문화와 자본, 에스닉 네트워크의 결절점으로서의 역할을 담당함으로서 에스닉 구성원들에게 있어서는 '우리라는 의식'을 공유하는 상징적인 공간으로서의 존재가 된다. 그리고 그러한 공간을 통하여 구성원간의 만남과 정보의 교환이 이루어지게 되며, 사회적 네트워크는 국경을 초월하여 모국이나 제3국까지 확산되어간다. 이곡동에서는 에스닉 상점이 커뮤니티의 중심적인 역할을 담당하여 구성원들이 하나의 공동체로서 자신들의 네트워크를 확산시켜나갈 수 있도록 하고 있었다. 하지만 그러한 네트워크는 자신들의 에스닉 집단에만 지나치게 초점이 맞추어져 있었기 때문에 아직까지도 외국인들과 지역주민과의 공감대는 형성되지 않고 있었다. 외국인노동자는 앞으로도 더욱 증가하게 될 것이며, 연구지역에서의 에스닉 커뮤니티화도 더욱 급속하게 진행될 것이라 예상되는 가운데 보다 공생이 가능한 다민족사회의 실현을 위한 방안이 검토되지 않으면 안 된다.

  • PDF

복합용도 초고층빌딩에 대한 개별주차정보제공 알고리즘 개발 (Development and Effectiveness of Private Parking Information Algorithm)

  • 김영선;남백;이철기;오영태
    • 한국ITS학회 논문지
    • /
    • 제12권5호
    • /
    • pp.13-21
    • /
    • 2013
  • 대형 쇼핑몰과 멀티플랙스 등과 같은 복합용도의 초고층 건물은 일반 건축물에 비해 주차시설의 규모가 크고 주차장 내 외부를 연결하는 유출입구의 수가 증가하는 특징을 나타내며, 이러한 특징은 주차장 내부에서의 차량 운행거리를 증가시켜 내부통행에 대한 혼잡이 발생하고, 주차 공간을 찾기 위해 운전자가 주차장을 배회함으로써 차량의 공회전이 증가할 뿐만 아니라, 주차 후 운전자의 보행동선을 증가시키는 등 운전자에게 주차로 인한 많은 어려움을 겪게 하고 있다. 이에 본 연구에서는 건물의 방문 목적 및 운전자의 이동경로에 따라 운전자에게 최적의 주차장소를 지정해주는 개별 주차정보제공 알고리즘을 개발하였으며, 개발된 알고리즘을 평가하기 위하여 제2롯데월드 신축 부지를 사례 지역으로 선정하고 평가를 수행하였다. 평가 결과 기존 주차정보제공 알고리즘에 비해 개별주차정보제공 알고리즘을 적용할 경우, 주차장 내 이동거리는 7.43~83.4% 정도 감소하는 것으로 분석되었으며, $CO_2$ 배출량의 경우 평균 47.7% 정도 감소하는 것으로 분석되어 개별주차정보제공 알고리즘 적용에 따른 그 효율성이 매우 큰 것으로 분석되어 적용효과를 검증하였다.

커피음용행동의 의미와 목적에 대한 개념도 분석 (Concept Mapping Analysis on the Meaning of Coffee-Drinking Behavior)

  • 오보영;이상희
    • 감성과학
    • /
    • 제19권4호
    • /
    • pp.55-70
    • /
    • 2016
  • 본 연구는 커피를 마시는 대학생들이 커피음용 행동의 의미에 대해 어떻게 지각하고 있는지를 알아보기 위해 수행되었다. 이를 위해 대학생 15명을 연구 참가자로 선정하여 커피음용 행동의 의미에 대한 아이디어를 산출하고, 그 내용을 바탕으로 69개의 진술문을 도출해냈다. 이후 다차원 척도 분석과 위계적 군집분석을 사용하여 개념도분석을 실시하여 참가자들의 개념적 구조를 확인하였다. 그 결과 대학생들이 지각하는 커피 음용 행동의 의미에 대한 구성 요인으로 7개의 군집이 도출되었다. 각 군집은 '개인이 원하는 신체적 효과를 얻기 위한 방법', '사교 활동의 수단', '심리적 위안을 얻기 위한 방법', '공간 활용 및 사적인 시간을 보내기 위한 음용', '습관적 음용 및 카페인의 효과 이용', '커피만의 다양한 특성과 매력을 즐김', '커피의 도시적이고 고급스러운 이미지 선호'로 나타났다. 또한 각 군집을 분류하는 두 가지 차원을 알아본 결과, 커피 내적고려-커피 외적고려 차원과 정서적 요인-물리적 요인의 두 차원을 확인할 수 있었다. 한편 군집별 중요도를 살펴본 결과, 대학생이 커피음용의 행동의 의미로 가장 중요하게 생각하는 요인은 '공간 활용 및 사적인 시간을 보내기 위한 음용'으로 나타났다. 마지막으로 연구의 의의 및 후속연구를 위한 제한점을 제시하였다.