• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.405-410
• /
• 2000

Multi-level (macro-level, meso-level, and micro-level) mechanism of prefinitely strained concrete materials os studied The multi-level analysis explains the additional quasibrittle concrete material ductility that comes from lateral confinement and their multi-level interaction mechanisms. The so-called "upgraded tube-squash test" is used to achieve 50% axial strain and over 70 degree of deviatoric strain of quasibrittle concrete materials under extremely high pressure without producing visible cracks. In the micro-level analysis, the variations of hydration rte, micropores, and hydrate phased are analyzed. In the meso-level analysis, mesocracks (the initial invisible cracks) at the interfaces between aggregates and cement paste matrices are studied. The high confining effect in the specimen on the meso-level cracks is also studied. In the macro-level analysis, the physical behavior of prefinitely strained concrete materials is studied. The co-relationships of the results from the three distinct levels of analyses based in various prestraining (0%, 15%, 35%, and 50%) are studied. For the extremely deformed or strained concrete problems, multi-level analysis will be used to explain the unclear and unstudied mechanism of concrete materials, The multi-level analysis can provide us with valuable insights that can explain the additional ductility and confining effect in concrete. concrete.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.337-343
• /
• 2015

The multi-level inverters are highly efficient for high-power and medium-voltage AC driving applications, such as high-speed railway systems and renewable energy resources, because such inverters generate lower total harmonic distortion (THD) and electromagnetic interface (EMI). Lower switching stress occurs on switching devices compared with conventional two-level inverters. Depending on the multi-level inverter topology, the required components and number of switching devices are different, influencing the overall efficiency. Comparative studies of multi-level inverters based on loss analysis and output characteristic are necessary to apply multi-level inverters in high-power AC conversion systems. This paper proposes a theoretical loss analysis method based on piecewise linearization of characteristic curves of power semiconductor devices as well as loss analysis and output performance comparison of five-level neutral-point clamped, flying capacitor inverters, and high-level cascaded H-bridge multi-level inverters.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.151-162
• /
• 2000

This study is concerned with computerized multi-level substructuring methods and stress analysis of coil springs. The purpose of substructuring methods is to reduce computing time and capacity of computer memory by multiple level reduction of the degrees of freedom in large size problems that are modeled by three dimensional continuum finite elements. In this paper, the spring super element developed is investigated with tension, torsion, and bending of a cylindrical bar in order to verify its accuracy and efficiency for the multi-level substructuring method. And then the algorithm is applied to finite element analysis of coil springs. The result demonstrates the validity of the multi-level substructuring method and the efficiency in computing time and memory by providing good computational results in coil spring analysis.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.67-75
• /
• 2003

Viewpoint-dependent feature-based modelling in computer-aided design is developed for the purposes of supporting engineering design representation and automation. The approach of this paper uses a combination of a multi-level modelling approach. This has two stages of mapping between models, and the multi-level model approach is implemented in three-level architecture. Top of this level is a feature-based description for each viewpoint, comprising a combination of form features and other features such as loads and constraints for analysis. The middle level is an executable representation of the feature model. The bottom of this multi-level modelling is a evaluation of a feature-based CAD model obtained by executable feature representations defined in the middle level. The mappings involved in the system comprise firstly, mapping between the top level feature representations associated with different viewpoints, for example for the geometric simplification and addition of boundary conditions associated with moving from a design model to an analysis model, and secondly mapping between the top level and the middle level representations in which the feature model is transformed into the executable representation. Because an executable representation is used as the intermediate layer, the low level evaluation can be active. The example will be implemented with an analysis model which is evaluated and for which results are output. This multi-level modelling approach will be investigated within the framework aimed for the design automation with a feature-based model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.333-342
• /
• 1999

An improved optimization algorithm for multi-objective and multi-level (MO/ML) optimum design of steel frames is proposed in this paper. In order to optimize the steel frames under seismic load, two main objective functions need to be considered for minimizing the structural weight and maximizing the strain energy. For the efficiency of the proposed method, well known multi-level optimization techniques using decomposition method that separately utilizes both system-level and element-level optimizations and an artificial constraint deletion technique are incorporated in the algorithm. And also dynamic analysis is executed to evaluate the implicit function of structural strain energy at each iteration step. To save the numerical efforts, an efficient reanalysis technique through sensitivity analysis of dynamic properties is unposed in the paper. The efficiency and robustness of the improved MOML algorithm, compared with a plain MOML algorithm, is successfully demonstrated in the numerical examples.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2221-2229
• /
• 2020

After the Fukushima Daiichi nuclear power plant (NPP) accident, level 3 probabilistic safety assessment (PSA) has emerged as an important task in order to assess the risk level of the multi-unit NPPs in a single nuclear site. Accurate calculation of the radionuclide concentrations and exposure doses to the public is required if a nuclear site has multi-unit NPPs and large number of people live near NPPs. So, there has been a great need to develop a new method or procedure for the fast and accurate offsite consequence calculation for the multi-unit NPP accident analysis. Since the multi-unit level 3 PSA is being currently performed assuming that all the NPPs are located at the same position such as a center of mass (COM) or base NPP position, radionuclide concentrations or exposure doses near NPPs can be drastically distorted depending on the locations, multi-unit NPP alignment, and the wind direction. In order to overcome this disadvantage of the COM method, the idea of a new multiple location (ML) method was proposed and implemented into a new tool MURCC (multi-unit radiological consequence calculator). Furthermore, the MURCC code was further improved for the multi-unit level 3 PSA that has the arbitrary number of multi-unit NPPs. The objectives of this study are to (1) qualitatively and quantitatively compare COM and ML methods, and (2) demonstrate the strength and efficiency of the ML method. The strength of the ML method was demonstrated by the applications to the multi-unit long-term station blackout (LTSBO) accidents at the four-unit Vogtle NPPs. Thus, it is strongly recommended that this ML method be employed for the offsite consequence analysis of the multi-unit NPP accidents.

• 대한간호학회지
• /
• 제39권3호
• /
• pp.409-421
• /
• 2009

Purpose: In this research multi-level analysis was done to identify factors related to quality of services. Patient characteristics and organizational factors were considered. Methods: The data were collected from the Health Insurance Review and Assessment Service(HIRA) data base. The sample was selected from 17,234 patients who had been admitted between January 2007 and May 2008 to one of 253 long-term care hospitals located in Seoul, six other metropolitan cities or nine provinces The data were analyzed with SAS 9.1 using multi-level analysis. Results: The results indicated that individual level variables related to quality of service were age, cognitive ability, patient classification, and initial quality scores. The organizational level variables related to quality of service were ownership, number of beds, and turnover rate. The explanatory power of variables related to organizational level variances in quality of service was 23.72%. Conclusion: The results of this study indicate that differences in the quality of services were related to organizational factors. It is necessary to consider not only individual factors but also higher-level organizational factors such as nurse' welfare and facility standards if quality of service in long term care hospitals is to be improved.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 2005

The purpose of this study is to analyze the relation between the dwelling location and the satisfaction level, and suggest a proposal to increase the quality of the livability space. A first of this study began from public surveys conducted to gather the information of satisfaction level from 4 multi-family housing sites in Gwang-ju. The plan was to the characteristics of the LS(livability space). The poll and the observation investigation was run concurrently. The cross analysis and the frequency analysis were used to analyze the data from the questionnaires. The validity of fixed quantitative index was got through the correlation analysis between the result of former analysis and index of livability space. The result said that the dwelling location have relations with the satisfaction level. In the conclusion, this will be a suggestion of the methods to enhance equal-quality of the livability space.

• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1494-1500
• /
• 1999

다양한 데이터 전송속도가 혼합된 고속의 멀티미디어 서비스를 제공하기 위해 Multi-Code CDMA (Code Division Multiple Access) 전송 방식이 제안되고 있다. 이 전송방식은 고속의 데이터를 N개의 병렬 저속 데이터 흐름으로 바꾸고, 서로 구별 가능한 PN코드로 확산 후 합하여 발생하는 multi level 신호를 전송한다. 이 multi-level신호는 역방향 link상에서 이동국 송신 출력이 커짐에 따라 인접 서비스 구역에 미치는 간섭양이 증대되는 문제점이 발생한다. 따라서 이러한 문제점을 해결할 수 있는 M/B 변환부(multi level to binary level conversion)를 이용하여 multi level의 신호를 binary level 신호로 바꾸어 전송하는 Multi-Code CDMA 전송방식을 제안하고, M/B를 사용한 MC-CDMA 전송방식과 M/B를 사용하지 않은 MC/CDMA 전송방식의 성능을 비교하였다.

• 경영과학
• /
• 제31권3호
• /
• pp.61-76
• /
• 2014

There are three methods for calculating the optimal level for spare part inventories in a MIME (Multi Indenture and Multi Echelon) system : marginal analysis, Lagrangian relaxation method, and genetic algorithm. However, their solutions are sub-optimal solutions because the MIME system is neither convex nor separable by items. To be more specific, SRUs (Shop Replaceable Units) are required to fix a defected LRU (Line Replaceable Unit) because one LRU consists of several SRUs. Therefore, the level of both SRU and LRU cannot be calculated independently. Based on the limitations of three existing methods, we proposes a improved algorithm applying marginal analysis on determining LRU stock level and genetic algorithm on determining SRU stock level. It can draw optimal combinations on LRUs through separating SRUs. More, genetic algorithm enables to extend the solution search space of a SRU which is restricted in marginal analysis applying greedy algorithm. In the numerical analysis, we compare the performance of three existing methods and the proposed algorithm. The research model guarantees better results than the existing analytical methods. More, the performance variation of the proposed method is relatively low, which means one execution is enough to get the better result.