• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.19-25
• /
• 2019

To detect the impact location of a structure, the authors' group conducted a study on piezoelectric paint sensor. The piezoelectric paint sensors are used for impact detection due to their inherent characteristics: sensitivity to high-frequency signal and impact. Additionally, the paint sensor can be applied on curved and complex structures where ceramic sensor would not be applicable. Moreover it is a self-powered sensor therefore no need for an external power source. For impact localization, mosaic pattern electrodes were coated on the specimen and the impact signal obtained from any part of the electrode where the impact occurred. If we more precise impact localization is required, the electrodes should be divided into more parts and impact data acquisition conducted in all the points of the electrode. In this paper, we developed a light, cheap and simple multi-channel data acquisition system to aid in data gathering. In total four channels data acquisition have been tested using the ARM Cortex-M3.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.545-555
• /
• 2020

This paper presented efficient transceiver structure using sub-band processing for underwater communication in terms of covertness and performance improvement. In aspect of covertness, encrypted coded-bits are divided into groups, and center frequency and sub band are determined by coded-bits of each group. Therefore, as center frequencies are changed randomly, it maintain the covertness effectively. In aspect of performance improvement, the performance of underwater communication mainly depends on multi-path propagation characteristics, Doppler-spread, and frame synchronization. Accordingly, in order to overcome these effects, non-coherent energy detector and turbo equalization method are employed in receiver side. Furthermore, optimal frame synchronization was proposed. Through the simulation and lake experiment, performance analysis was conducted. Especially in the lake experiment, as a result of applying optimal frame synchronization method to receiver structure, errors are corrected in most frames.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.341-355
• /
• 2023

BACKGROUND/OBJECTIVES: The consumption of dietary supplements has shown an increase among young people in their 20s. We aimed to compare the use of dietary supplements and related factors between Chinese international and Korean college students living in South Korea. SUBJECTS/METHODS: We conducted online surveys of 400 Chinese international students and 452 Korean college students from January to February 2021. We analyzed the factors related to the use of dietary supplements by these students using multi-group structural equation modeling and logistic regression analysis. RESULTS: Approximately 65% of the Chinese international students and 93% of the Korean college students consumed dietary supplements at least once in the year preceding the survey. The common types of dietary supplements consumed by both groups of students were vitamin and mineral supplements, Lactobacillus products, and red ginseng products. Structural equation modeling showed that perception of the consumption of dietary supplements by family and friends positively influenced attitude toward dietary supplements. This effect was higher for Korean college students than for Chinese international students (P < 0.01). Attitude toward dietary supplements positively influenced their use, and this effect was higher for Chinese international students than for Korean college students (P < 0.001). Logistic regression analysis showed that the use of dietary supplements by Chinese international students was significantly associated with age, self-reported health status, interest in health, perception of and attitude toward dietary supplements, and length of residence in South Korea. Among Korean college students, it was associated with exercise frequency and attitude toward dietary supplements. CONCLUSION: This study showed significant differences in the use of dietary supplements and related factors between Chinese international and Korean college students. Therefore, nutrition education programs on dietary supplements need to have differentiated content for each group. Such differences also suggest that the industry should consider the relevant characteristics of college students while developing and marketing dietary supplements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.685-692
• /
• 2024

In this paper, we propose a new CNN model to improve the recognition performance of command voice signals. This method obtains a spectrogram image after performing a short-time Fourier transform (STFT) of the input signal and improves command recognition performance through supervised learning using a CNN model. After Fourier transforming the input signal for each short-time section, a spectrogram image is obtained and multi-classification learning is performed using a CNN deep learning model. This effectively classifies commands by converting the time domain voice signal to the frequency domain to express the characteristics well and performing deep learning training using the spectrogram image for the conversion parameters. To verify the performance of the speech recognition system proposed in this study, a simulation program using Tensorflow and Keras libraries was created and a simulation experiment was performed. As a result of the experiment, it was confirmed that an accuracy of 92.5% could be obtained using the proposed deep learning algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.5
• /
• pp.845-852
• /
• 2024

In this paper, we propose mult-band antenna included Sub-6 GHz band for WLAN system. The proposed antenna has the fourth strip line and slot in the partial ground plane to obtain impedance matching. The total substrate size is 48.0 mm (W)×50.0 mm (L), thickness (h) 1.0 mm, and the dielectric constant is 4.4, which is made of 26.0 mm (W2)×42.0 mm (L1+L2+4.0(L1+L2+4.0 mm+L8+L9) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 115 MHz (0.825 to 0.940 GHz) for 900 MHz band, 210.0 MHz (2.29 to 2.50 GHz) for 2.4 GHz band, 270.0 MHz (3.45 to 3.72 GHz) for 3.5 GHz band, and 930.0 MHz (4.95 to 5.88 GHz) for 5.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.129-143
• /
• 2017

The shallow sediments in the southwestern Ulleung Basin consist of mass flow deposits such as slide/slump and debris flow deposits (DFD), caused by slope failure. These sediments are proven to be important in studying geological disaster and stability of the seafloor. In this paper, we analysised the flow accumulation and slope failure susceptibility of the Ulleung Basin on the basis of multi-beam data, collected in this area. We also studied the distribution pattern and the seismic characteristics of the DFD in the uppermost layer of the Ulleung Basin on the basis of seismic data. The slope susceptibility was calculated as the frequency ratio of each factors including slope, aspect, curvature and stream power index (SPI), which causes the slope failure. These results indicate that the slope failure is frequently to occur in the southern and western continental slope of the Ulleung Basin. The sediment flow (mass flow) caused by the slope failure converges to the north and northwest of the Ulleung Basin. According to the seismic characteristics, the uppermost layer in study area can be divided into four sedimentary unit. These sedimentary units develop from the south and southwest to the north and northwest in association with slope susceptibility and flow accumulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.777-784
• /
• 2010

Recently, the necessity of underwater communication and demand for transmitting and receiving various data such as voice or high resolution image data are increasing as well. The performance of underwater acoustic communication system is influenced by characteristics of the underwater communication channels. Especially, ISI(inter symbol interference) occurs because of delay spread according to multi-path and communication performance is degraded. In this paper, we study the OFDM technique to overcome the delay spread in underwater channel and by using CP, we compensate for delay spread. But PAPR which OFDM system has problem is very high. Therefore, we use DFT-spread OFDM method to avoid nonlinear distortion by high PAPR and to improve efficiency of amplifier. DFT-spread OFDM technique obtains high PAPR reduction effect because of each parallel data loads to all subcarrier by DFT spread processing before IFFT. In this paper, we show performance about delay spread through OFDM system and verify method that DFT spread OFDM is more suitable than OFDM for underwater communication. And we analyze performance according to two subcarrier mapping methods(Interleaved, Localized). Through the simulation results, performance of DFT spread OFDM is better about 5~6dB at $10^{-4}$ than OFDM. When compared to BER according to subcarrier mapping, Interleaved method is better about 3.5dB at $10^{-4}$ than Localized method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.138-149
• /
• 2000

Various modeling techniques for ultrasonic wave propagation and scattering problems in finite solid media are presented. Elastodynamic boundary value problems in inhomogeneous multi-layered plate-like structures are set up for modal analysis of guided wave propagation and numerically solved to obtain dispersion curves which show propagation characteristics of guided waves. As a powerful modeling tool to overcome such numerical difficulties in wave scattering problems as the geometrical complexity and mode conversion, the Boundary Element Method(BEM) is introduced and is combined with the normal mode expansion technique to develop the hybrid BEM, an efficient technique for modeling multi mode conversion of guided wave scattering problems. Time dependent wave forms are obtained through the inverse Fourier transformation of the numerical solutions in the frequency domain. 3D BEM program development is underway to model more practical ultrasonic wave signals. Some encouraging numerical results have recently been obtained in comparison with the analytical solutions for wave propagation in a bar subjected to time harmonic longitudinal excitation. It is expected that the presented modeling techniques for elastic wave propagation and scattering can be applied to establish quantitative nondestructive evaluation techniques in various ways.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.796-804
• /
• 2010

It is important to use the comb type pilot allocation for the continuous channel and efficient processing. And DFT-spreading OFDM is used a lot to solve high PAPR problem of OFDM system. However, PAPR is increased again when comb type pilot is used to estimate channel characteristics. So, in this paper, we employ a new SLM method to DFT-spreading OFDM system to reduce increased high PAPR. And we suggest an effective method to transmit side information without additional bandwidth. Pilot and side information must be preserved from jamming or intentional interferences since those are very important in DFT spread OFDM system using SLM. So, in this paper, we like to analyze and simulate the performance of DFT spread OFDM system based on SLM against jamming signal. To remedy the vulnerable shortcomings of DFT spread OFDM about jamming or intentional interferences, we employ FH(Frequency Hopping) method and analyze system performance under the several jamming conditions such as MTJ(Multi Tone Jamming) and PBJ(Partial Band Jamming).

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.52-62
• /
• 2006

The purpose of this study is to investigate the changes of modern Korean men's pants design from 1962 to 1998 by reviewing fashion magazine advertisements and pictorials. For theoretical study, the characteristics and the importance of apparel advertisements and the changes of modern Korean men's fashion trend were reviewed. For sample selection, first, 932 pictorials of men';s wear designs from Joongang Magazine, Shin Dong-A, Bokjangwolbo, Meot, Men's Life, WWD, and SFAA's photograph album, published from 1962 to 1998 were selected and then excluded some samples that could not clearly identify the pants design. Content analysis method was used to analyze the content of magazines and pictorials. The final samples are classified into pattern, color, length, silhouette, and existence or non-existence of turn-up. Frequency and $x^2$-test were conducted using a SAS statistics package to analyse the data. The results were as follows. ; (1) Solid pattern was the most prevailed throughout the last four decades and followed by stripe, check, the others, abstract, dot and floral. There is no significant difference in the type of men's pants pattern between each decade. (2) It showed a significant difference in colors of men's pants between decades. The colors in men's wear are divided into nine categories and the order of occurrence are as follows; multi-color is the most frequently shown and followed by brown, gray, blue, black, green, pink, yellow, and red. More various colors appeared over the period, however, multi color was the most popular in all decades but in the 60s. (3) Full length of pants style occupied more than 96% throughout all four decades. Due to the popularity of sports wear in men's fashion during the 90s, the shorts style appeared not only in sports wear and casual wear but also in suit style. (4) There is a significant difference in silhouette of men's pants between decades. The silhouette of men's pants were divided into four types and their order of occurrence are as follows; basic, baggy, fitted, and loose silhouette. Basic silhouette was the most prevailed throughout the whole four decades. (5) A significant difference was shown in the existence or non-existence of turn-up of men's pants between decades. Non-existence of turn-up of men's pants was the most prevailed throughout the whole four decades.