• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.83-91
• /
• 2001

본 연구에서는 2차원 평면상에서 자유장응답 해석을 위하여 유한요소-경계요소 조합에 의한 수치해석기법을 개발하였다. 전체 계를 외부영역과 내부영역으로 구분하였다. 외부영역은 동적 다층반무한 기본해를 이용한 경계요소로 모형화되고 내부영역은 유한요소로 모형화하여 조합하였다. 다층지반의 외부에서 입사하는 지진에 의한 지진응답해석을 수행하기 위하여 동적기본해를 이용한 자유장응답해석을 수행하였다. 지진응답해석에서는 지반의 전단병형률에 따라 변화하는 비선형특성을 모형화하기 위해 등가선형화기법을 적용하였다. 지진응답해석의 검증에 의하여 해석결과를 상용프로그램의 결과와 비교하였다. 결과적으로 지진응답해석을 효과적으로 수행할 수 있는 수치해석기법을 개발하였고 구조물이 있는 경우로의 확장돠 가능하게 되었다.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.15-31
• /
• 2005

Nowadays, the road safety is an important research field. One of the principal research topics in this field is the vehicle localization in the road network. This article presents an approach of multi sensor fusion able to locate a vehicle with a decimeter precision. The different informations used in this method come from the following sensors: a low cost GPS, a numeric camera, an odometer and a steer angle sensor. Taking into account a complete model of errors on GPS data (bias on position and nonwhite errors) as well as the data provided by an original approach coupling a vision algorithm with a precise numerical map allow us to get this precision.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.77-83
• /
• 2020

4WD technology is being actively applied to passenger cars. Therefore, dry multi-plate clutches are used for transfer cases. On the other hand, dry clutches have problems related to large vibrations and poor ride quality. To solve this problem, this paper proposes a multi-plate clutch with an MR fluid. When fastening the multi-plate clutch in the transfer case, the proposed MR clutch was applied to reduce the shock and friction, which is a key component in a four-wheel-drive system. MR multi-plate clutch has a fluid coupling mode and a compression mode. A torque model equation was derived for the optimal design. The analysis was performed using Ansys Maxwell to optimize the design parameters of the multi-plate clutch. Electromagnetic field analysis confirmed the strength of the magnetic field when the number of disks and plates were changed, and the maximum strength of the magnetic field was 0.45 Tesla. By applying this to the torque equation, the spacing between the plates was 2 mm, and the inner and outer diameters of the plates were selected to be 45 mm and 55 mm, respectively. Overall, this paper proposes an optimal design technique to maximize the performance of an MR multi-plate clutch.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.240-245
• /
• 2001

The effect of additives on the orientation of magnetic Sr-ferrite powders has been studied during powder injection molding under applied magnetic field for fabricating multi-pole anisotropic sintered Sr-ferrite magnets. The orientation of the Sr-ferrite powders depends sensitively on the fluidity of powder-binder mixture, related to the binder additives and the injection molding temperature, and the magnetic field intensity. The orientation of Sr-ferrite powders is good for the compacts with stearic acid added in the binder system of paraffin wax/carnauba wax/HDPE, but it is poor for the compacts with silane coupling agent added. The orientation of Sr-ferrites higher than 80% is achieved at the following useful conditions; apparent viscosity lower than 2500 poise in 1000 sec$^{-1}$ shear rate and applied magnetic field higher than 4 kOe.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.5
• /
• pp.234-241
• /
• 2005

The performance of passive conductor loop (hereinafter 'loop') method which is used to mitigate the magnetic field around overhead power transmission line is dependent on its configuration and installed location, which are affected by installation conditions of the loops such as objective areas and levels of magnetic field mitigation. Thus, because the design problem of loops is difficult and cumbersome by variety of their configuration and complexity of magnetic coupling mechanism, it is need to be formulated as a computer-based optimum problem to determine the most effective and reasonable loop model satisfying the installation conditions. In this paper, the optimum locations of the multi-wired multiple loops including series reactance compensations are searched by using the genetic algorithm (GA) to mitigate effectively the magnetic fields of relatively near points or far points from transmission line at Am height, and the magnetic fields mitigation characteristics of each loop are analyzed in the view of magnitude, direction and phase of cancellation fields by polarized vector concept to identify their adequacy and rationality for the installation objectives.

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.423-436
• /
• 2016

Currently, there is a great interest in the coupling between multiphase fluid flow and geomechanical effects in hydrocarbon reservoirs and surrounding rocks. The ideal solution for this coupled problem is to introduce the geomechanical effects through the stress analysis solution and implement an algorithm, which assures that the equations governing the flow and stress analyses are obeyed in each time step. This paper deals with the implementation of a program (FORTRAN90 interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators, using a partial coupling algorithm. The explicit coupled hydro-mechanical behavior of Iranian field during depletion and $CO_2$ injection is studied using the soils consolidation procedure available in ABAQUS. Time dependent reservoir pressure fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS. The FEM analysis of the reservoir showed no sign of plastic strain under production and $CO_2$ injection scenarios in any part of the reservoir and the stress paths do not show a critical behavior.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.69-75
• /
• 2007

The information in physical planning field shows the socio-economic potentials of land resources while cadastral data does the physical and legal realities of the land. The two domains commonly deal with land information but have different views. Cadastre has to evolved to the multi-purpose ones which provide value-added information and support a wide spectrum of decision makers by mixing their own information with other spatial/non-spatial databases. In this context, the demands of data exchange between the two domains is growing up but this cannot be done without resolving the heterogeneity between the two information applications. Both of either discipline sees the reality within its own scope, which means each has a unique way to abstract real world phenomena to the database. The heterogeneity problem emerges when an GIS is autonomously and independently established. It causes considerable communication difficulties since heterogeneity of representations forms unique data semantics for each database. The semantic heterogeneity obviously creates an obstacle to data exchange but, at the same time, it can be a key to solve the problems too. Therefore, the study focuses on facilitating data sharing between the fields of cadastre and physical planning by resolving the semantic heterogeneity. The core job is developing a conversion mechanism of cadastral data into the information for the physical planning by DB coupling techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1479-1487
• /
• 2011

In the field of the entire electronic component industry including mobile IT products, the importance of a versatile package with the multifunctional or high capacity memories is gradually increased. Multi Chip Package which has several chips in a single package is frequently used for that purpose. In MCP, epoxy adhesive films play a major role in adhesion between the chips or between chip and substrate. A series of silane coupling agents with a functional group such as epoxy, amine, mercaptan, and isocyanate were applied to the epoxy adhesives and material properties such as wettability and reliability of the adhesives were investigated. From the results, the silane coupling agent with an epoxy functional group showed highest wettability and peel strength in epoxy adhesive. For those reasons, it lead to a superior reliability in the epoxy adhesive against interfacial fracture behaviors through moisture resistance test.

• Structural Engineering and Mechanics
• /
• v.43 no.5
• /
• pp.691-709
• /
• 2012

This paper provides a variety of viewpoints to illustrate the mechanism of the deck-stay interaction with the appropriate initial shapes of cable-stayed bridges. Based on the smooth and convergent bridge shapes obtained by the initial shape analysis, the one-element cable system (OECS) and multi-element cable system (MECS) models of the Kao Ping Hsi Bridge in Taiwan are developed to verify the applicability of the analytical model and numerical formulation from the field observations in the authors' previous work. For this purpose, the modal analysis of the two finite element models are conducted to calculate the natural frequency and normalized mode shape of the individual modes of the bridge. The modal coupling assessment is also performed to obtain the generalized mass ratios among the structural components for each mode of the bridge. The findings indicate that the coupled modes are attributed to the frequency loci veering and mode localization when the "pure" deck-tower frequency and the "pure" stay cable frequency approach one another, implying that the mode shapes of such coupled modes are simply different from those of the deck-tower system or stay cables alone. The distribution of the generalized mass ratios between the deck-tower system and stay cables are useful indices for quantitatively assessing the degree of coupling for each mode. These results are demonstrated to fully understand the mechanism of the deck-stay interaction with the appropriate initial shapes of cable-stayed bridges.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.316-321
• /
• 1997

The purpose of this study is to reduce the vibration noise of differential gear by reducing torque fluctuation of drive pinion shaft which causes vibration noise of differential gear in rear wheel drive vehicles. For this we developed multi-degree of freedom analysis model in which mass moment of inertia and torsional spring combined, the validity of the simulation model was checked by the field test and we examined the influence of torsional vibration of driveline elements by performing forced vibration analysis of engine excitation torque. We studied the methods for reducing torsional vibration of driveline according to the design factor of propeller shaft and examined the effects reducing vibration differential gear by applying flexible coupling.