• 제목/요약/키워드: multi-directional

검색결과 401건 처리시간 0.029초

탄소나노튜브 고분자 복합체 기반 스마트 구조건전성 진단 (Smart Structural Health Monitoring Using Carbon Nanotube Polymer Composites)

  • 박영빈;;;김상우
    • Composites Research
    • /
    • 제22권6호
    • /
    • pp.1-6
    • /
    • 2009
  • 탄소나노튜브 고분자 복합체는, 외력에 의한 변형에 따라 전기적 저항이 변화하는 피에조저항(piezoresistivity) 거동을 나타낸다. 피에조저항은 고분자 모재 내에서 탄소나노튜브가 형성하는 전기전도망(conductive network)의 변화에 의해서 발현된다. 피에조저항 낮은 탄소나노튜브 함유량에서 더 현저하게 나타난다. 탄소섬유, 카본블랙 등 타 탄소기반 소재에 비해 전기전도도와 길이 대 직경비(aspect ratio)가 월등히 우수하기 때문에, 낮은 탄소나노튜브의 함유량에서도 스트레인 센싱시스템을 구현할 수 있다. 본 연구에서는, 구조물에 부착 또는 임베드 시켜서 구조물의 건전성을 실시간을 진단할 수 있는 탄소나노튜브 고분자 복합체 기반 센싱시스템을 개발하였다. 센서는 열가소성 수지와 다중벽 탄소나노튜브를 사용하여 필름 형태로 제조되었으며, 센싱 성능은 나노복합체를 구조물에 부착한 후 인장, 굽힘, 압축 등의 다양한 형태의 하중을 가하면서 평가하였다.

철근 콘크리트 전단벽에서 면외 하중이 면내 전단성능에 미치는 영향 (The Effect of Out-of-Plane Load on the In-Plane Shear Capacity of Reinforcement Concrete Shear Wall)

  • 신혜민;박준희
    • 한국지진공학회논문집
    • /
    • 제28권2호
    • /
    • pp.77-83
    • /
    • 2024
  • The design shear strength equations of RC shear walls have been developed based on their performance under in-plane (IP) loads, thereby failing to account for the potential performance degradation of shear strength when subjected to simultaneous out-of-plane (OOP) loading. Most of the previous experimental studies on RC walls have been conducted in one direction under quasi-static conditions, and due to the difficulty in experimental planning, there is a lack of research on cyclic loading and results under multi-axial loading conditions. During an earthquake, shear walls may yield earlier than their design strength or fail unexpectedly when subjected to multi-directional forces, deviating from their intended failure mode. In this paper, nonlinear analysis in finite element models was performed based on the results of cyclic loading experiments on reinforced concrete shear walls of auxiliary buildings. To investigate the reduction trend in IP shear capacity concerning the OOP load ratio, parametric analysis was conducted using the shear wall FEM. The analysis results showed that as the magnitude of the OOP load increased, the IP strength decreased, with a more significant effect observed as the size of the opening increased. Thus, the necessity to incorporate this strength reduction as a factor for the OOP load effect in the wall design strength equation should be discussed by performing various parametric studies.

Retrieval Spectral Albedo using red and NIR band of SPOT/VGT

  • Lee, Chang Suk;Seo, Min Ji;Han, Kyung-Soo
    • 대한원격탐사학회지
    • /
    • 제30권3호
    • /
    • pp.367-373
    • /
    • 2014
  • Albedo is one of the critical parameters for understanding global climate change and energy/water balance. In this study, we used red and NIR reflectance from Satellite Pour I'Obervation de la Terre (SPOT)/Vegetation (VGT) S1 product. The product is preprocessed for users that they are atmospherically corrected using Simple Method Atmospheric Correction (SMAC) by Vision on Technology (VITO) for calculating broadband albedo. Roujean's Bi-directional Reflectance Distribution Function (BRDF) model is a semi-empirical method used for BRDF angular integration and inversion. Each kernel of Roujean's model was multi integrated by angle components (i.e., viewing zenith, solar zenith, and relative azimuth angle). Black-sky hemispherical function is integrated by observational angle; whereas, white-sky hemispherical efficient is integrated by incident angle. Estimated spectral albedo of red ($0.61{\sim}0.68{\mu}m$, B2) and near infrared ($0.79{\sim}0.89{\mu}m$, B3) have a good agreement with MODIS albedo products.

임상가를 위한 특집 2 - 치주 질환과 동맥경화성 심혈관 질환의 관계성에 대한 고찰과 치주처치 (The review and treatment regarding on association between periodontitis and atherosclerotic cardiovascular diseases)

  • 이효정
    • 대한치과의사협회지
    • /
    • 제51권9호
    • /
    • pp.501-510
    • /
    • 2013
  • This paper reviews a current view regarding the association between periodontitis and atherosclerotic cardiovascular diseases (ACVD). Many evidences have suggested that there exist biological mechanisms by which periodontitis can lead to ACVD. Periodontal infection can lead to direct bacterial invasion into endothelial tissues through the blood stream, then the bacteria can activate the host inflammatory response followed by atheroma formation, maturation and exacerbation. Also, chronic periodontal infections may indirectly induce endothelial activation or dysfunction through a state of systemic inflammation as evidenced by elevated plasma acute proteins, IL-6 and fibrinogen as well. There is moderate evidence that periodontal treatment can reduce systemic inflammation and improvement of both clinical surrogate markers. But there is no periodontal intervention study available on primary ACVD prevention. There is consistent and strong epidemiologic evidence, including in vitro, animal and clinical studies, that periodontitis imparts increased risk for future ACVD. However, evidences from intervention trials to date are not sufficient to confirm the multi directional causality of periodontitis in ACVD etiology. Well-designed intervention trials on the impact of periodontal treatment on the prevention of ACVD outcomes are needed.

후륜 조향 동력학 모델 및 제어 로직 개발 (Development of the Dynamic Model and Control Logic for the Rear Wheel Steering in 4WS Vehicle)

  • 장진희;김상현;한창수
    • 한국자동차공학회논문집
    • /
    • 제4권6호
    • /
    • pp.39-51
    • /
    • 1996
  • In the turning maneuver of the vehicle, its motion is mainly dependent on the genuine steering characteristics in view of the directional stability for stable turning ability. The under steer vehicle has an ability to maintain its own directonal performance for unknown external disturbances to some extent. From a few years ago, in order to acquire the more enhanced handling performance, some types of four wheel steering vehicle were considered and constructed. And, various rear wheel control logics for external disturbances has not been suggested. For this reason, in this posed rear wheel control logic is based on the yaw rate feed back type and is slightly modified by an yaw rate tuning factor for more stable turning performance. And an external disturbance is defined as a motivation of the additional yaw rate in the center of gravity by an uncertain input. In this study, an external disturbance is applied to the vehicle as a form of the additional yawing moment. Finally, the proposed rear wheel control logic is tested on the multi-body analysis software(ADAMS). J-turn and double lane change test are performed for the validation of the control logic.

  • PDF

20세기 서구 여성 헤어스타일 변화의 주기성 연구 (A Study on the Cycle of Western Hair Style′s Change in 20th Century)

  • 박길순;이주연
    • 복식문화연구
    • /
    • 제4권3호
    • /
    • pp.383-394
    • /
    • 1996
  • Even it's not easy to in the cycle of the change without the qualification of the data, but we can try to figure out a cycle of change in fashion as Kroeber used content analysis. As content analysis with quantitative data increases the objectivity, especially in the case of highly complex materials like s appearance, multi-directional research method; quantitative and qualitative methods are combined in this study. In this research, first the change in hair length(HL), hair width(HW), hair height(HH) was examined to find out possible cyclic aspects of change in each elements and the significant relationships among the hair style was probed and the cyclic aspects between hair style elements and skirt style elements were compared. The data was analyzed by using Time series analysis and Pearson correlation coefficients. The statistical analysis of the hair style of 20th century showed that the hair style's elements changed independently and indicated the cyclic aspects in hair style as Kroeber's fashion cycle. To consider of this result, the hair style changed in a cyclic pattern, its pattern were different from skirt style's. And as hair style's change was affected by change, the hair styles change appeared during wars and disappeared during a social stabilization; this result supports social change theory.

  • PDF

평면 배열 안테나에 의한 다중 빔 복사 패턴의 합성 (A Multibeam Pattern Synthesis of Planar Array Antenna)

  • 허문만;이인재;윤현보
    • 한국전자파학회논문지
    • /
    • 제17권10호
    • /
    • pp.1007-1019
    • /
    • 2006
  • 임의의 필드 분포를 갖는 단일 페치 안테나를 평면 배열하고 각 소자에 공급되는 급전 신호의 크기와 위상을 유전자 알고리즘으로 최적화하여, 여러 방향의 지향성과 널을 갖는 다중 빔 복사 패턴의 합성 방법을 제안하였다. 제안된 방법의 유효성을 확인하기 위해서, $2{\times}2$ 평면 배열 안테나를 제작하고 원거리 복사 패턴의 계산 결과와 측정 결과를 비교하여 동일한 특성을 확인하였으며, 다중 빔 복사 패턴의 합성은 $8{\times}8$ 배열 안테나 시스템을 이용하여, 시뮬레이션을 통해서 각 소자의 급전 신호의 크기와 위상을 최적화하였다.

로봇 경로 제어를 위한 속도기반 Dijkstra 알고리즘 (A Speed-Based Dijkstra Algorithm for the Line Tracer Control of a Robot)

  • 천성권;김근덕;김종근
    • 한국IT서비스학회지
    • /
    • 제10권4호
    • /
    • pp.259-268
    • /
    • 2011
  • A robot education system by emulation based on Web can be efficiently used for understanding concept of robot assembly practice and control mechanism of robot by control programming. It is important to predict the path of the line tracer robot which has to be decided by the robot. Shortest Path Algorithm is a well known algorithm which searches the most efficient path between the start node and the end node. There are two related typical algorithms. Dijkstra Algorithm searches the shortest path tree from a node to the rest of the other nodes. $A^*$ Algorithm searches the shortest paths among all nodes. The delay time caused by turning the direction of navigation for the line tracer robot at the crossroads can give big differences to the travel time of the robot. So we need an efficient path determine algorithm which can solve this problem. Thus, It is necessary to analyze the overhead of changing direction of robot at multi-linked node to determine the next direction for efficient routings. In this paper, we reflect the real delay time of directional changing from the real robot. A speed based Dijkstra algorithm is proposed and compared with the previous ones to analyze the performance.

다방향 흐름분배 알고리듬을 이용한 분포형 모형의 적용성 검토 (Application review of Distributed Rainrall-Runoff Model Using Multi-Directional Flow Allocation)

  • 한건연;김극수;김태형;이원하
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.154-158
    • /
    • 2009
  • 본 연구에서는 관측 기술의 향상과 지형자료들의 가용성 증가를 통해 유역 홍수 통합관리에서 많은 주목을 받고 있는 분포형 강우-유출 모형의 적용성 검토를 수행하였다. 본 연구에서 이용한 다방향 흐름분배 알고리듬은 고해상도 지형정보로부터 도출된 흐름정보를 상대적으로 저해상도 지형정보에 전달하여, 저해상도 지형정보의 이용을 통해 발생될 수 있는 흐름정보의 평활화 (smoothing)로 인한 흐름정보의 손실을 최소화하는 목적으로 개발되었다. 다방향 흐름분배 알고리듬 및 실시간 강우-유출 보정 알고리듬의 적용성 검토를 위해 평창강유역에 대하여 지점 강우량 자료를 이용하여 모의를 수행하였다. 모형 수행의 정확도 검토를 위해 다방향 흐름분배 알고리듬 및 실시간 강우-유출 보정 알고리듬을 적용한 경우와 그렇지 않은 경우를 비교해 본 결과 알고리듬을 적용한 경우가 적용하지 않은 경우보다, 유역 유출반응을 더 잘 묘사하고 있음을 알 수 있었다. 알고리듬을 적용하지 않은 경우도 수문곡선의 형태상 좀 더 향상된 관측의 묘사가 가능할 것으로 예상되었으나 합리적이지 못한 매개변수의 무리한 조정이 요구될 수도 있으며, 매개변수의 조정으로 인해 수문곡선의 패턴의 변화가 발생될 수 있을 것이다.

  • PDF

Global environment change monitoring using the next generation satellite sensor, SGLI/GCOM-C

  • HONDA Yoshiaki
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.11-13
    • /
    • 2005
  • The Third Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) concluded that many collective observations gave a aspect of a global warming and other changes in the climate system. Future earth observation using satellite data should monitor global climate change, and should contribute to social benefits. Especially, human activities has given the big impacts to earth environment This is a very complex affair, and nature itself also impacts the clouds, namely the seasonal variations. JAXA (former NASDA) has the plan of the Global Change Observation Mission (GCOM) for monitoring of global environmental change. SGLI (Second Generation GLI) onboard GCOM-C (Climate) satellite, which is one of this mission, is an optical sensor from Near-UV to TIR. This sensor is the GLI follow-on sensor, which has the various new characteristics. Polarized/multi-directional channels and 250m resolution channels are the unique characteristics on this sensor. This sensor can be contributed to clarification of coastal change in sea surface. This paper shows the introduction of the unique aspects and characteristics of the next generation satellite sensor, SGLIIGCOM-C, and shows the preliminary research for this sensor.

  • PDF