• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.691-694
• /
• 2010

Since the data collected at a sensor node is the stream data, for processing efficiently user queries, the query index should be constructed at each node. To construct the minimized query index at the node, it is required to reduce the number of query constraints inserted into the query index. In this paper, we propose the scheme of the query constraints distribution using the multi-dimensional data index in order to diminish the number of the inserted query constraints.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1821-1826
• /
• 2003

In this study, we discuss CIP method, which can treat compressible/incompressible problem and multi-phase problem. We can apply this method to the general equations by using CCUP. In this paper, non-staggered grid arrangement and predictor-corrector method are used to enhance later development and the solution accuracy and convergence performance. To validate the numerical algorithm proposed in this paper, the two-dimensional unsteady flow in the driven cavity is simulated. The numerical results of this subject using the present algorithm are compared with other numerical results. As a result, it is prived that the present scheme gives stable and improved solutions, and the results even coarse grid are in good agreement with other result using a fine grid arrangement.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.1-10
• /
• 2010

In the present paper, a numerical method based on the constraint interpolation profile (CIP) method is applied for simulating two-dimensional violent sloshing problems. The free surface boundary value problem is considered as a multiphase problem which includes water and air. A stationary Cartesian grid system is adopted, and an interface capturing method is used to trace the shape of free surface profile. The CIP combined unified procedure (CCUP) scheme is applied for flow solver, and the tangent of hyperbola for interface capturing (THINC) scheme is used for interface capturing. Numerical simulations have been carried out for partially-filled 2D tanks under forced sway and roll motions at various filling depths and frequencies. The computational results are compared with experiments and/or the other numerical results to validate the present numerical method.

• Water for future
• /
• v.23 no.1
• /
• pp.119-127
• /
• 1990

The concentration of cohesive suspended sediment is determined by the circulation of water and the material dispersion. The equations of the two-dimensional, depth-integrated dispersive transport are the Reynolds equation, continuity equation, and advection-dispersion equation based on the Fick's law. A finite difference method has been applied to two models of circulation and dispersion transport. The circulation model is solved by the explicit scheme and the dispersion transport model is solved by multi-operational scheme. It is investigated wheter advective terms are included when the equation of circulation is applied to the model. For advection-dispersion equation, it was also investigated about variations of suspended sediment concentration with respect to the critical shear stresses.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.55.1-55.1
• /
• 2020

In an attempt to investigate the nonlinear dynamics such as shock, shear, and turbulence associated with ultra-relativistic jets, we develop a new relativistic hydrodynamics (RHD) code based on the weighted essentially non-oscillatory (WENO) scheme. It is a 5th-order accurate, finite-difference scheme, which has been widely used for solving hyperbolic systems of conservation equations. The code is parallelized with MPI and OpenMP. Through an extensive set of tests, the accuracy and efficiency of different WENO reconstructions, and different time discretizations are assessed. Different implementations of the equation of state (EOS) for relativistic fluid are incorporated, As the fiducial setup for simulations of ultra-relativistic jets, we adopt the EOS in Ryu et al. (2006) to treat arbitrary adiabatic index of relativistic fluid, the WENO-Z reconstructions to minimize numerical dissipation without loss of stability, and the strong stability preserving Runge-Kutta (SSPRK) method to achieve stable time stepping with large CFL numbers. In addition, the code includes a high-order flux averaging along the transverse directions for multi-dimensional problems, and the modified eigenvalues for the acoustic modes to effectively control the carbuncle instability. We find that the new code performs satisfactorily simulations of ultra-relativistic jets.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.181-189
• /
• 1998

A numerical study based on the three-dimensional Reynolds averaged Navier-Stokes equations is presented to analyze the transonic flowfield through two-stage axial compressor. Explicit four-step Runge-Kutta scheme is used for solution algorithm, and local time step and implicit residual averaging are introduced for enhancing the convergency. Artificial dissipation model is adopted to assure the stability of solution. The solver is coupled with Baldwin-Lomax model to describe turbulence. To avoid calculating the unsteady flow, a mixing process is modeled at a station between rotating and stationary blade rows. Results show a variety of important physical phenomena. Comparison of the flowfields with and without tip clearance shows that the effect is considerable in this flowfield. Comparisons with experimental data carried out to validate the calculational results show reasonable agreements. Some remedies are also suggested to improve the revealed problems.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.277-280
• /
• 2005

A shape optimization is applied to achieve a design objective in three-dimensional forging processes. In multi-stage forging processes, among the important design aspects, the die shape fur preforming is regarded as the design variable since it influences the forged part relatively higher than the others. The rigid-plastic finite element method and the sensitivity method are employed and formulated to solve a formulated optimization problem. An approximation scheme is also used for the direction search during the optimization. The upset forging of a square box is selected as a test example in order to demonstrate and verify the optimization process of this study. After the optimization, the optimized shape of the die yields a finial product of desire shape.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.597-601
• /
• 2008

Three-dimensional structures of detonation wave propagating in circular tube were investigated. Inviscid fluid dynamics equations coupled with a conservation equation of reaction progress variable were analyzed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Variable-$\gamma$ formulation was used to account for the variable properties between unburned and burned states and the chemical reaction was modeled by using a simplified one-step irreversible kinetics model. The computational code was parallelized based on domain decomposition technique using MPI-II message passing library. The computations were carried out using a home made Windows based PC cluster having 160 AMD AthloxXP and Athlon64 processor. The computational domain consisted of through a roundshaped tube with wall conditions. As an initial condition, analytical ZND solution was distributed over the computational domain with disturbances. The disturbances has circumferential large gradient. The unsteady computational results in three-dimension show the detailed mechanisms of multi-cell mode of detonation wave instabilities resulting diamond shape in smoked-foil record.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.336-349
• /
• 2003

Histograms have been getting a lot of attention recently. Histograms are commonly utilized in commercial database systems to capture attribute value distributions for query optimization Recently, in the advent of researches on approximate query answering and stream data, the interests in histograms are widely being spread. The simplest approach assumes that the attributes in relational tables are independent by AVI(Attribute Value Independence) assumption. However, this assumption is not generally valid for real-life datasets. To alleviate the problem of approximation on multi-dimensional data with multiple one-dimensional histograms, several techniques such as wavelet, random sampling and multi-dimensional histograms are proposed. Among them, GENHIST is a multi-dimensional histogram that is designed to approximate the data distribution with real attributes. It uses overlapping buckets that allow more efficient approximation on the data distribution. In this paper, we propose a scheme, OPT that can determine the optimal frequencies of overlapped buckets that minimize the SSE(Sum Squared Error). A histogram with overlapping buckets is first generated by GENHIST and OPT can improve the histogram by calculating the optimal frequency for each bucket. Our experimental result confirms that our technique can improve the accuracy of histograms generated by GENHIST significantly.

• Journal of Korean Society for Quality Management
• /
• v.25 no.2
• /
• pp.169-188
• /
• 1997

The purpose of this study is concerned with suggesting a new a, pp.oach to evaluating the overall product quality in the sense of the relative efficiency of products, whose quality is measured with 8-dimensional attributes, suggested by Garvin. The attributes included 8 quality measures, that is, performance, features, reliability, conformance, durability, serviceabilit, aesthetics, and perceived quality. This study, also, introduced DEA(Data Envelopment Analysis) as an evaluation tool to tackle the problem of how to measure one product against another when each product can be measured along a number of dimensions, and given that there exists no a priori satisfactory weighting scheme to combine these dimensions into an overall rating for each products. In order to a, pp.y the DEA to evaluating the products, we must define two concepts, such as DMU(Decision Making Units) and input-output relationship. Finally, the suggested method in this study was validated through a case study of the electric jar, and this DEA a, pp.oach can be used in evaluating the other products with multi-attrribute quality.