• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.763-766
• /
• 1991

The moving of each axis in the robot manipulator can be represented with the motion of cartesian space. This paper shows the robot manipulator of the straight line trajectory planning algorithms in the cartesian space. The relation formulas between cartesian space and joint space are induced to accomplish a desired trajectory in the cartesian space and the velocity vector of sampling time in the cartesian space is transformed into the velocity vector of joint by the interpolation method. The error of trajectory in moving is removed by obtaining the real position for the present joint position and the desired distance is made by comparing the real position and the next position. Through the simple tests for suggested algorithms are confirmed the validity of algorithms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1383-1386
• /
• 1987

This paper concerns, the method for velocity of dynamic Image on two dimensional sequence Image which can be obtained from two sample lines on the street. The velocity of a single moving object Is measured by the number of total frame which Is required when an automobile passes over the second sample line through the first sample line. The measured results show that the velocity error Is less than 5% comparing with the value measured by X-band speed gun.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1573-1576
• /
• 2008

A simulation system is developed to calculate the apparent motion-induced image from a sequence of temporal luminance transitions, while using the properties of the human visual system. Based on the simulation method, both edge (moving block) and detail degradation (line spreading, grating, sinusoidal pattern), and also color aberration are discussed.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount to the change of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.729-733
• /
• 1997

Due to the variety of disturbance, it is not ease to accomplish the in-process detection of weld line with non-contact sensor. To get around this difficulties problem develop an automatic seam tracking weld system, the reliable signal processing algorithm has been recommanded. In this research, laser displacement sensor is applied as a seam finder in the automatic tracking system. The sensor is controlled by a dc servo motor which is mounted at X-Y moving table. X-Y moving table manipulated by an ac servo motor controls the position and velocity of the welding torch. First, X-Y table moves to Y-axis to search the welding joint feature before starting the welding, and welding joint is from the scanning data and weighting factor for each other. Second, weld line is determined using proposed signal processing algorithm during welding process. Form the experimental results, we could see the possibility that laser displacement sensor with procesed algorithm can be used as a seam finder in welding process under the severe noise (spatter,arc light etc.) condition

• 산업기술연구
• /
• 제19권
• /
• pp.179-187
• /
• 1999

The computer pattern sewing machine is an automatic sewing machine that is controlled by an input pattern. Even a novice can run this machine for various tasks fast and reliably such as sewing a button, a belt ring and an airbag, etc. The pattern processing software, which is the main software of this machine, is for editing and modifying pattern data by online teaching or off-line editing, setting up parameters, and calculate a moving distance of working area on the x-y axes. In this paper we propose an algorithm to generate pattern data for sewing by simplifying image data. The pattern data are composed of outline data like dot, line, circle, arc, curve, etc. We need converting this data into sewing data which involve sewing parameter, moving distance of working are an the x-y axes, thread, spindle speed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2003년도 추계학술대회
• /
• pp.159-162
• /
• 2003

In this paper, to find probable collision positions between moving object and terrain in 3D space efficiently, we use a model, similar to Ray Tracing, which finds the triangles intersected by a directed line segment from a large amount of triangles. We try to reduce dead space as much as possible to find candidate triangles intersected by a directed line segment than previous work's. A new modified octree, LBV-Octree(Least Bounding Voxel Octree), is proposed, and we have a ray tracing with it. In the experiment, ray tracing with LBV-Octree provides $5%{\sim}11%$ better performance than with classical octree.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.151-157
• /
• 2009

본 연구에서는 오프라인 쇼핑몰에서 실시간 위치추적 기술과 USB 메모리와 RF가 융합된 Tag(이하 u-Card라 함)를 이용하여 위치추적 및 동선분석의 한계점을 개선하고 레퍼런스 태그를 이용한 위치추적을 통해 정확하고 신뢰성을 향상시키며 차폐물 간섭에 의한 오차율에 대한 한계점을 개선한 알고리즘 및 위치추적엔진 모듈을 제안한다.

• 소음진동
• /
• 제3권3호
• /
• pp.245-251
• /
• 1993

The problem of sound radiation from infinite elastic beams under the action on harmonic moving line forces is studies. The reaction due to fluid loading on the vibratory response of the beam is taken into account. The beam is assumed to occupy the plane z=0 and to be axially infinite. The beam material and elastic foundation are assumed to be lossless and Bernoulli-Euler beam theory including a tension force (T), damping coefficient (C) and stiffness of foundation $(\kappa_s)$ will be employed. The non-dimensional sound power is derived through integration of the surface intensity distribution over the entire beam. The expression for sound power is integrated numerically and the results examined as a function of Mach number (M), wavenumber ratio$(\gamma{)}$ and stiffness factor $(\Psi{)}$. Here, our purpose is to explain the response of sound power over a number of non-dimensional parameters describing tension, stiffness, damping and foundation stiffness.