• Journal of Oral Medicine and Pain
• /
• v.22 no.2
• /
• pp.295-307
• /
• 1997

This study was performed to investigate the reproductibility of eccentric mandibular movements according to preferred chewing side, range of mouth opening, type of lateral guidance and involvement of temporomandibular disorders. 50 patients with temporomandibular disorders and 65 dental students without any signs and symptoms were randomly selected for this study as the patients group and the control group, respectively. For recording and observation of eccentric mandibular movement trajectory, BioEGN$^\textregistered$ of Biopak$^\textregistered$ system (Bioresearch Inc., USA) was used. Each eccentric movement to anterior, right and left side was performed three times similar to the movement pattern for Pantronic Reproducibility Index. mandibular path was analyzed by three dimensional positional change and the three paths from one direction were compared with one another. From this, reproducibility index of one-directional lateral movement could be calculated, and total reproducibility index, named BioEGN reproducibility index(BERI), was also computed from three-directional eccentric movement likewise. BioEGN reproducibility Index could have four value of score by small or large scale, and by outgoing or incoming movement. The data were analyzed by SAS/stat program and the results obtained were as follows: 1. Right side chewing subjects showed more consistent pattern In reproducibility index in comparison between patients group and control group than left chewing subjects have done, and reproducibility was low in patients group. However, there was no difference between the two stoups in bilateral chewing subjects. 2. There were no difference in reproducibility index between preferred chewing side and contralateral side in unilateral chewing subjects whereas reproducibility index in left side on outgoing movement were higher than in right side in bilateral chewing subjects. 3. Difference in total reproducibility index(BERI) between canine guidance group and non-canine guidance group were not observed though difference in reproducibility index on lateral movement were observed in part. 4. There were no difference in reproducibility index between affected side and contralateral side in unilaterally affected patients, and between unilaterally affected patients and bilaterally affected patients in patients group. 5. Highly significant positive correlationship were shown among the four 쇼pes of total reproducibility index(BERI) in total subjects, and range of clinical mouth opening was negatively correlated with BEBI on outgoing movements and with index on outgoing movement to preferred side.

• Physical Therapy Korea
• /
• v.24 no.2
• /
• pp.58-65
• /
• 2017

Background: Children with cerebral palsy (CP) have impaired postural control, but critically require the control of stability. Consequently, therapeutic interventions for enhancing postural control in children with CP have undergone extensive research. One intervention is sensorimotor training (SMT) using a Flexi-bar, but this has not previously been studied with respect to targeting trunk control in children with CP. Objects: This study was conducted to determine the effect of SMT using a Flexi-bar on postural balance and gait performance in children with CP. Methods: Three children with ambulatory spastic diplegia (SD) participated in the SMT program by using a Flexi-bar for forty minutes per day, three times a week, for six weeks. Outcome variables included the pediatric balance scale (PBS), trunk control movement scale (TCMS), 10 meter walking test (10MWT), and 3-dimensional movement coordination measurement. Results: The SMT provided no statistically significant improvement in PBS, TCMS, 10MWT, or 3-dimensional movement coordination measurement. However, positive changes were observed in individual outcomes, as balance and trunk control movement were improved. Conclusion: SMT using a Flexi-bar may be considered by clinicians as a potential intervention for increasing postural balance and performance in children with SD. Future studies are necessary to confirm the efficacy of Flexi-bar exercise in improving the functional activity of subjects with SD.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.13-21
• /
• 1999

Active movement is able to actively contract his muscles and move a segment either with or without assistance. This movement maintain physiologic elasticity and contractility of the participating muscles, provide sensory feedback from the contracting muscles and stimulus for bone integrity as well as increase circulation and prevent thrombus formation, in addition to develop coordination and moor skills for functional activities. Passive movement is the motion to the external force; gravity, machine, another individuals. Active movement is more activated rather than passived on the central nervous system. Therefore, we think that active movement is more effected facilitating through specific inhibitory mobilization of muscle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2555-2559
• /
• 2003

In this study, we develop an automatic sorting system, which is mostly affected by frictional forces between a veneer and friction-generating device. So we will make a suitable dynamic model and mechanism to control friction force using a AC servo-motor. We suggest Stick friction and Column friction model, which is occurred between roller and veneer and within veneers as well. A kind of sensor can get the velocity of roller and movement of roller vertical direction. We assume that the several things to simplify the complicate and difficult nonlinear friction phenomenon. And to create an optimal normal force, which can generate a suitable friction force, we control the movement of sorting roller and supporter as well. We introduce several results about a friction character and suggest the value of calibration of sorting roller movement and supporters as well.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.334-340
• /
• 2005

A mouse is an important input device that is used in most of all computer works. A mouse control time prediction model was proposed in this study. Especially, the model described the time of mouse control that made a cursor to move within path constraints. The model was developed by a laboratory experiment. Cursor movement times were measured in 36 task conditions; 3 levels of path length, 3 levels of path width and 4 levels of target's width. 12 subjects participated in all conditions. The time of cursor movement with path constraints could be better explained by the combination of Fitts' law with steering law($r^2=0.947$) than by the other models; Fitts' law($r^2=0.740$), Steering law($r^2=0.633$) and Crossman's model($r^2=0.897$). The proposed model is expected to be used in menu design or computer game design.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.699-702
• /
• 2002

Shunt valves implanted in the subcutaneous tissue of brain to treat patient with hydrocephalus were numerically simulated to investigate influence of pressure pulsation on their flow control characteristics. Shunt valves are subjected to pressure variation since ventricles enclosing the brain are under pressure pulsation rather than uniform pressure due to blood pressure variation. We modeled flow orifice through shunt valve and imposed pulsating pressure and valve diaphragm movement to compute flow through the valve. The results of our study indicated that flow rate increased by $40{\%}$ by introducing pressure pulsation and diaphragm movement on the shunt valve. Our results demonstrate the pressure-flow control characteristics of shunt valves unplanted above human brain may be quite different from the characteristics obtained by syringe pump test with uniform pressure and no diaphragm movement.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2131-2137
• /
• 2008

In this paper, COP (center of pressure) during quiet standing and squat-and-stand movement was analyzed to compare the postural control of young and elderly subjects with special interest in the elderly females who were reported to have higher fall rate than the elderly males. Subjects include the young subjects (10 males: $21.8{\pm}2.6yrs$, 10 females: $20.4{\pm}0.3yrs$) and the elderly subjects (8 males: $75.5{\pm}4yrs$, 8 females: $72.3{\pm}3.5yrs$). Analysis parameters were the mean of the distance between the instantaneous COP and the average COP (COP distance) and the mean of the COP movement velocity (COP velocity) in both AP (anterio-posterior) and ML (media-lateral) directions. During quiet standing, the COP distance in ML direction of elderly females was significantly greater than that of elderly males and the COP velocity of elderly females in both ML and AP direction were significantly greater than those of all the other groups. During squat and stand movement, the COP distance of elderly females was not significantly different with that of the elderly males. However, the COP velocity of elderly females was significantly greater than that of all the other groups. The large lateral weight shift (COP distance) of elderly females during quiet standing may explain their greater fall rate. However, this does not apply to squat-and stand movement. In contrast, COP velocity results show that the elderly females' COP is rapidly trembling compared to that of elderly males during both quiet standing and squat and-stand movement. This results suggest that rapid trembling or postural sway may reflect the reduced postural control ability and the risk of falling.

• Research in Community and Public Health Nursing
• /
• v.17 no.4
• /
• pp.482-491
• /
• 2006

Purpose: Hemiplegia patients who were attacked by a stroke suffer from hemiplegic disabilities as well as motor disabilities. For them, rehabilitation cure is being carried out broadly. However, it is not enough for them to use the upper extremity than the lower extremity. For the use of the upper extremity, we examined the effect of constraint-induced movement therapy developed in this research on patients who experienced a stroke following hemiplegia. Method: For this study we selected 36 stroke patients who were registered at the community health center through accidental sampling, and assigned 21 of them to the experimental group, and 15 to the control group. The experimental group had constraint-induced movement therapy for 5 days and 7 hours a day from 9 to o'clock in the morning 9 to 4 o'clock in the afternoon 4 including warmup exercise and main exercise in the rehabilitation room, whereas the control group were restricted. Result: As a result of constraint-induced movement therapy, affected side elbow joint flexion range, side shoulder joint extension range and side shoulder joint of the flexion range of motions increased obviously in the experimental group compared to those in the control group. Conclusion: The result above clearly shows that constraint-induced movement therapy is an effective intervention for the rehabilitation of hemiplegia patients in increasing affected side elbow joint of the flexion range of motion, the shoulder joint extension, and the increase of flexion range of motion.

• The korean journal of orthodontics
• /
• v.49 no.5
• /
• pp.279-285
• /
• 2019

Objective: This study evaluated the efficiency of anchorage provided by temporary anchorage devices (TADs) in maxillary bicuspid extraction cases during retraction of the anterior teeth using a fixed appliance. Methods: Patients aged 12 to 50 years with malocclusion for which bilateral first or second maxillary bicuspid extractions were indicated were included in the study and randomly allocated to the TAD or control groups. Retraction of the anterior teeth was achieved using skeletal anchorage in the TAD group and conventional dental anchorage in the control group. A computed tomography (CT) scan was performed after alignment of teeth, and a second CT scan was performed at the end of extraction space closure in both groups. A three-dimensional superimposition was performed to visualize and quantify the maxillary first molar movement during the retraction phase, which was the primary outcome, and the stability of TAD movement, which served as the secondary outcome. Results: Thirty-four patients (17 in each group) underwent the final analysis. The two groups showed a significant difference in the movement of the first maxillary molars, with less significant anchorage loss in the TAD group than that in the control group. In addition, TAD movement showed only a slight mesial movement on the labial side. On the palatal side, the mesial TAD movement was greater. Conclusions: In comparison with conventional dental anchorage, TADs can be considered an efficient source of anchorage during retraction of maxillary anterior teeth. TADs remain stable when correctly placed in the bone during the anterior tooth retraction phase.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2014

This paper proposes a kinect-based human motion recognition model for the 3D contents control after tracking the human body gesture through the camera in the infrared kinect project. The proposed human motion model in this paper computes the distance variation of the body movement from shoulder to right and left hand, wrist, arm, and elbow. The human motion model is classified into the movement directions such as the left movement, right movement, up, down, enlargement, downsizing. and selection. The proposed kinect-based human motion recognition model is very natural and low cost compared to other contact type gesture recognition technologies and device based gesture technologies with the expensive hardware system.