• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.1-5
• /
• 2013

In order to evaluate fatigue endurance for an MTB(mountain bike) frame, FEM(finite element method) analysis was performed. For evaluating the fatigue endurance of the MTB frame, the S-N data for Al-6061 fillet weldment were compared with the stress analysis results through FEM analysis of the frame. Three loading condition, pedalling, horizontal and vertical loading conditions were considered for fatigue endurance evaluation. Horizontal loading(+1200 N) condition was found to be the most severe to the frame. The maximum von Mises stress of the frame under horizontal loading(+1200 N) condition was determined 294 MPa through FEM analysis of the frame. Conclusively, on the basis of fatigue strength of 200 MPa at the number of cycles of 50,000, the MTB frame has an improper safety factor of approximately 0.25, suggesting that this frame needs reinforcement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.965-973
• /
• 2011

Small unmanned ground vehicles(SUGVs) are typically operational on unstructured environments such as crashed building, mountain area, caves, and so on. On those terrains, driving control can suffer from the unexpected ground disturbances which occasionally lead turnover situation. In this paper, we have proposed an algorithm which sustains driving stability of a SUGV as preventing from turnover. The algorithm exploits potential field method in order to determine the stability of the robot. Then, the flipper and manipulator posture of the SUGV is optimized from local optimization algorithm known as gradient descent method. The proposed algorithm is verified using 3D dynamic simulation, and results showed that the proposed algorithm contributes to driving stability of SUGV.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.561-579
• /
• 2014

This research estimates the necessity of a better governance plan on the purpose of fulfillment energy recovery by building resource recycling system for biomass resources and waste resources that derive from agricultural and mountain village areas. The utilization of new renewable energy technology which uses waste and biomass sources diverse as variety of resources, collecting method, operator etc. and is structurally complicated the formation of policy is also very difficult. There is failure because of the problems which occurs from the policy led by government. Biomass Town Development Project should be made through the central government and the local government integrated support system and should be formed a consultative group in order to process the project mutually with these two department including the experts from the related areas. This consultative group, while government organizations carry out the hub function of strategic knowledge management, should carry out the control tower function to be able to be net working transfer the information with the cooperation of private and government so vitalize the communication area among the related actors. And to be able to increase the participation rate of the local people the consistent and various educations should be given so a smooth business promotion progress will be desired through the change of perception and coactive participation of people.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1152-1158
• /
• 1997

In order to develop new soysauce using mountain edible herbs, cirsium setidens Nakai and comfrey were added to the raw material of soysauce as a partially substituting ingredient to wheat composing the total nitrogen. The changes of chemical composition of soysauce by the substitution of 1~5% cirsium setidens after four months of aging were similar to those of the control soysauce. On the other hand, total solid content was decreased, while the pH was increased by more than 7%. The total nitrogen and solid contents in the confrey substituted soysauce were increased with the increment of the amount of comfrey, but showed little changes of the pH. The mineral contents of calcium and potassium in the soysauce after four months of aging at 10% substitution of cirsium setidens were increased by 1.7 and 1.4 times, respectively. A significant increase in calcium(2.3 times as compared to the control) was also observed in 7% substitution of comfrey. The amino acid contents such as methionine, tyrosine and histidine were markedly increased at 3% substitution of cirsium setidens. With 5% substitution of comfrey, the contents of tyrosine, glutamic acid methionine were increased by 4.4, 1.8 and 1.7 times, respectively as compared to the control. The results of sensory evaluation revealed that overall acceptability of soysauce with 1~5% substitution of cirsium setidens and 5% of comfrey exceeded other samples composing different ratios of substituting ingredients.

• Journal of Forest and Environmental Science
• /
• v.35 no.1
• /
• pp.31-40
• /
• 2019

Daphne pseudomezereum var. koreana is an endangered deciduous shrub distributed in mountain areas that is vulnerable to climate change. The purpose of this study was to provide foundational data on the physical characteristics, soil environment, and vegetation structure of habitats of Daphne pseudomezereum var. koreana habitat in Korea in order to help with management decisions on ecosystem restoration. Rock exposure was 15 to 35%, with an average of 24%. The native habitat of D. pseudomezereum included 129 taxa consisting of 46 families and 95 genera. Two-way cluster analysis divided the habitat into three plant communities: Community I (dominaterd by Tilia amurensis and Quercus mongolica), Community II (dominaterd by Fraxinus rhynchophylla and Acer pseudosieboldianum), and Community III (dominaterd by Ulmus davidiana var. japonica). The diversity indices for Communities I, II, and III were 1.124, 1.047 and 0.932, respectively. The soils were loam or clay loam. Soil pH, organic matter content, and available phosphoric acid were 5.40, 14.38%, and 31.08 ppm, respectively. Ordination analysis resulted that most significant factors influencing D. pseudomezereum distribution were magnesium content of soil, shrub layer, and altitude.

• Journal of Forest and Environmental Science
• /
• v.35 no.1
• /
• pp.61-68
• /
• 2019

The purpose of this study is to evaluate the natural habitat of Hotaria unmunsana Doi, which was first discovered at Mt. Unmun also represents a landscape indicator species for Daegu and Gyeongbuk provinces, and Luciola lateralis Motschulsky, which is the object of experiential activation at festivals in some cities in the region. The spatial range of this study is limited by Daegu City and Gyeongbuk province, and is used to predict the preference of firefly for altitude, slope, direction, shaded relief, riparian buffer zone, river environment, and farmland to analyze the area that best matches the habitat of fireflies. As a result, fireflies are highly influenced by altitude and there may be no large-scale habitats in some areas through the Nakdong and the Baekdu mountain ranges, which occur at high altitude. In most of the cities, we found major habitats around the streams and wetlands. By region, the sites were widely distributed around the cities focused on Nakdong River, and many habitats emerged around the Nakdong River tributary and gentle slopes. In order to preserve and spread the habitat of fireflies, the physical environment as well as their relationship with food chains and symbiotic organisms should be established, and excessive use of pesticides and herbicides in agricultural areas should be avoided.

• Geomechanics and Engineering
• /
• v.16 no.6
• /
• pp.635-642
• /
• 2018

Braced excavation systems are commonly required to ensure stability in construction of basements for shopping malls, underground transportation and other habitation facilities. For excavations in deposits of soft clays or residual soils, stiff retaining wall systems such as diaphragm walls are commonly adopted to restrain the ground movements and wall deflections in order to prevent damage to surrounding buildings and utilities. The ground surface settlement behind the excavation is closely associated with the magnitude of basal heave and the wall deflections and is also greatly influenced by the possible groundwater drawdown caused by potential wall leakage, flow from beneath the wall, flow from perched water and along the wall interface or poor panel connections due to the less satisfactory quality. This paper numerically investigates the influences of excavation geometries, the system stiffness, the soil properties and the groundwater drawdown on ground surface settlement and develops a simplified maximum surface settlement Logarithm Regression model for the maximum ground surface settlement estimation. The settlements estimated by this model compare favorably with a number of published and instrumented records.

• Geomechanics and Engineering
• /
• v.16 no.6
• /
• pp.577-588
• /
• 2018

A major concern in deep excavation project in soft clay deposits is the potential for adjacent buildings to be damaged as a result of the associated excessive ground movements. In order to accurately determine the wall deflections using a numerical procedure such as the finite element method, it is critical to use the correct soil parameters such as the stiffness/strength properties. This can be carried out by performing an inverse analysis using the measured wall deflections. This paper firstly presents the results of extensive plane strain finite element analyses of braced diaphragm walls to examine the influence of various parameters such as the excavation geometry, soil properties and wall stiffness on the wall deflections. Based on these results, a multivariate adaptive regression splines (MARS) model was developed for inverse parameter identification of the soil relative stiffness ratio. A second MARS model was also developed for inverse parameter estimation of the wall system stiffness, to enable designers to determine the appropriate wall size during the preliminary design phase. Soil relative stiffness ratios and system stiffness values derived via these two different MARS models were found to compare favourably with a number of field and published records.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.1
• /
• pp.15-22
• /
• 2018

Raymond, who adopted Le Corbusier's Errazuris House Project, built Karuizawa Villa by incorporating Japan's aspiration for Western modern architecture and strong convictions regarding the preservation of traditional culture heritage, which were prevalent in Japan at the time. Despite the controversy over his plagiarism, Karuizawa Villa shows several unique architectural characteristics. First, in terms of the arrangement and access system, the villa has a common space that affords a view of the lake by accessing from the mountain side. Second, in terms of spatial composition, the common space is connected to the mesonnette by placing a trail to enable enjoyment of natural scenery. In particular, personal space is planned in the shape of a cross by connecting several surfaces to the outside in order to secure enjoyment of the natural environment. Lastly, in the aspect of structure and materials, both architectural buildings adopted masonry by using natural stone as well as building materials suitable for each region and climate by using logs in constructing the main columns and beams. Through Karuizawa Villa, Raymond is considered to have established his own style by combining the standard of Western modern architecture and the elements of Japanese traditional architecture while valuing local architectural technology.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.2
• /
• pp.45-54
• /
• 2021

This study aims to establish administrative boundaries by utilizing digitalized old topographical map. Various problems have arisen due to unclear administrative boundaries. For example, there are various problems such as conflict amongst residents to occupy a larger area, unnecessary waste of administrative power, and difficulty in collecting various data for administrative units (farm area, statistical data, spatial analysis, living ara analysis). Therefore, in this study, an experimental study was conducted to establish administrative boundaries by using an old topographical map containing information on villages before administrative reform in 1914. As a result, the boundaries of towns, towns and villages were largely consistent. In order to divide the administrative boundaries based on the legal district boundaries, the administrative boundaries were established by referring to the contents of village introduction and natural boundaries (roads, rivers, mountain ranges, etc.) provided in towns and villages. However, there was a limit in establishing a precise boundary as it was not possible to secure a high-quality digitalized old topographical map.