• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.499-508
• /
• 2016

This paper describes a study of performance prediction of an electric propulsion system for multirotor UAVs. The electric propulsion system consists of motors, propellers, batteries and speed controllers, and significantly affects performance characteristics of the platform. The performance of the electric propulsion system for multirotor UAVs was predicted using an analytical model derived from the characteristics of each component, operation experiments and statistical analyses. Ground performance tests and endurance flights were performed to verify the reliability of the proposed performance prediction method. A quadrotor platform was designed to demonstrate the parcel delivery service used in the endurance flight. From the result of verification tests, it was confirmed that the proposed method has a good agreement.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.311-317
• /
• 2006

Poly-DCPD and poly-DCPD/silicates hybrids were prepared by in-situ ROMP poly-merization using $WCl_6$ catalyst. Good dispersion of silicates in DCPD medium can be accomplished by sonication method. Compared with nanocomposites prepared using $Na^+MMT$, the nanocomposites with CL 15A showed well dispersed silicate's morphology. superior thermal and mechanical properties. Additionally, well dispersed silicates in DCPD matrix enhanced the gas barrier property of the nanocomposites.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.5
• /
• pp.420-426
• /
• 2001

In this paper, we introduce a case study of developing a miniature humanoid robot that has 16 degrees of freedom and is able to perform statically stable walking. The developed humanoid robot is 37cm tall and weighs 1,200g. RC servo motors are used as actuators. The robot can walk forward and turn to any direction on an even surface. It equipped with a small digital camera, so it can transmit vision data to a remote host computer via wireless modem. The robot can be operated in two modes: One is a remote-controlled mode, in which the robot behaves according to the command given by a human operator through the user-interface program running on a remote host computer, the other is a stand-alone mode, in which the robot behaves autonomously according the pre-programmed strategy. The user-interface program also contains a robot graphic simulator that is used to produce and verify the robot\`s gait motion. In our walking algorithm, the ankle joint is mainly used for balancing the robot. The experimental results shows that the developed robot can perform statically stable walking on an even surface.

• Journal of Information Display
• /
• v.3 no.4
• /
• pp.19-22
• /
• 2002

In this paper, we introduce an efficient three-dimensional magnetic field mapping system for a Deflection Yoke (DY) in Cathode-Ray Tube (CRT). A three-axis Hall probe mounted in a small cylindrical bar and three-stepping motors placed in a non-magnetic frame were utilized for the mapping. Prior to the mapping starts, the inner contour of DY was measured by a laser sensor to make a look-up table for inner shape of DY. Three-axis magnetic fields are then digitized by a three-dimensional Hall probe. The results of the mapping can be transformed into various output formats such as multi pole harmonics of magnetic fields. Field shape in one, two and three- dimensional spaces can also be displayed. In this paper, we present the features of this mapping device and some analysis results.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.848-849
• /
• 2011

Rotating machines are using gears to change the rotary motion into the linear motion, on the other hand, linear motors have a accurate position control and excellent dynamic characteristics because of generating a thrust force directly. But the important problem, one of the linear motor is a high thrust force ripple. Thrust force ripple has a bad effect on the position accuracy and the dynamic characteristics, so it is necessary to reduce the thrust force ripple. Cogging is one of the cause that affect thrust force ripple. Cogging has some connection with the GCD between pole pitch and teeth pitch It is proposed method to reduce a thrust ripple of the linear motor that chamfering, skew, and so on. In this paper, the module phase set shift(MPSS) is used to reduce a thrust force ripple that has a similar effect to skew. And propose a method that reduce a thrust force ripple more by use of chamfering.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.1
• /
• pp.49-58
• /
• 2011

Among the various ERP solutions, SAP R/3 solution has been chosen because SAP system follows global standard processes which include most of business solutions for various industries. The ERP education is limited by learning theory only and they are not sufficient for understanding wide scale of business processes. Real world scenarios with hands on experience approach will be the core aspect of this article. As per real world scenarios, "ChungBuk Motors. Corp." has been created and students are asked to create the organization structure and the procurement process for this virtual enterprise. As a result, students attending this class showed better understanding of overall ERP system comparing to the students attended other ERP classes. The hands-on experience with real-world scenarios proved that it is most practical and efficient solution for educating ERP system.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.148-155
• /
• 2011

Direct torque control(DTC) of induction machines is known to offer fast instantaneous torque and flux control with a simple control structure. However, this scheme has two major disadvantageous, namely, a variable inverter switching frequency and a high torque ripple. These problems occur due to the use of hysteresis comparators in conventional DTC schemes, particularly in controlling the output torque. This paper reviews the utilization of constant frequency torque controllers (CFTC) in DTC to solve these problems while retaining the simple control structure of DTC. Some extensions of the work in utilizing a CFTC will be carried out in this paper which can further reduce the torque ripple. This is particularly useful for a system which has a limited/low sampling frequency. The feasibility of a CFTC with an extended carrier frequency in minimizing the torque ripple is verified through experimental results.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.125-132
• /
• 2004

The radial slot configuration in the solid propellant grain is usually fabricated by the polyurethane foam slot former The foam cannot be easily removed from the solid propellant, some can remain in the slot. Analogue solid propellant rocket motors using polyurethane foam to shape the slot are static fired with the foam former still in place in the slot. The pressure increases at the slot part are measured and there are indications of the propellant cracks at the insulations above the slot. The pressure increase is produced at the beginning of the burning sequence as the foam will hinder the combustion gas of the burning propellant from flowing into the central bore. The pressure increase up to about 300psi is predicted for the motor tested and this pressure increase depends on the gap between the propellant and foam surfaces and remaining foam volume. This amount of pressure increase inside of the slot is estimated to cause the propellant crack. To prevent this pressure increase, minimizing the foam remainder in the slot and making sufficient chamfering at the comer of the slot entrance are suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.211-218
• /
• 1999

The traditional robot manipulators are actuated by continuous range of motion actuators such as motors or hydraulic cylinders. However, there are many applications of mechanisms and robotic manipulators where only a finite number of locations need to be reached, and the robot’s trajectory is not important as long as it is bounded. Binary manipulator uses actuators which have only two stable states. As a result, binary manipulators have a finite number of states. The number of states of a binary manipulator grows exponentially with the number of actuators. This kind of robot manipulator has some advantage compared to a traditional one. Feedback control is not required, task repeatability can be very high, and finite state actuators are generally inexpensive. And this kind of robot manipulator has a fault tolerant mechanism because of kinematic redundancy. In this paper, we solve the inverse kinematic problem of a binary parallel robot manipulator using neural network and test the validity of this structure using some arbitrary points m the workspace of the robot manipulator. As a result, we can show that the neural network can find the nearest feasible points and corresponding binary states of the joints of the robot manipulator