• Journal of Korean Society for Quality Management
• /
• v.24 no.1
• /
• pp.96-109
• /
• 1996

In this paper, we consider the quality problem of black oxide process in casting for which Taguchi method is used. We explain simply the Taguchi method and existing problems in Black Oxide process. We analyze the problem by the quality improvement procedure proposed by Taguchi. The design factors and noises using cause-effect diagram are found, the experiment is made using orthogonal array. After ANOVA, the critical factors are determined and the optimal process condition is designed. After parameter design, we derive the tolerance levels. As a result of changing the levels of process parameters, the variance of quality characteristic was decreased by quarter and the average value was also decreased by half. We estimated the predictable profit of the improvement.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.584-587
• /
• 1992

Because linear motor directly drives linear motion, it does not need conversion equipment such as belt and gear. Especially linear pulse motor provide more precise positioning and large force of linear pulse motors. As current manufacture technic of linear pulse motor is much to be desired at home. This motor lay out to make use of computer aided design program, In this paper the experimental motor is 2-phases 4-poles hybrid pulse motor which has teeth per pole Simulation program is divided its function into 4 parts - air gap permeance analysis, permanent magnet & non-linear core operating point determine, winding configuration, leakage flux analysis. It is possible to make motor static and magnetic characteristics for this simulation program. Also, by varying input parameters of the program, experimental motor is to be compared to motor characteristics.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.604-606
• /
• 1992

Many Industrial applications require high facultied and high efficiency motor drives. Recently, as such motor driving system, switched reluctance motor ( S R M ) drives are proposed. This paper describes the design features, drive circuits, and performance of 6/4 S R M for high efficiency variable speed drives. The main advantages of these motors lie In high efficiency, simple driving circuitry, and low manufacturing cost. The prototypes have been built and tested, showing satisfactory performance.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.607-611
• /
• 1992

This paper presents the methods in improving the efficiency using of magnet wedge. After the energy crises of 1970's, more emphasis was placed on higher efficiencies. Efficiency of an induction motor can be improved by reducing the total losses, copper, losses, iron or core losses etc. However high efficiency designs result, in larger size and cost than standard motors. In the methods of the reducing the losses, ripple losses of slot flux can be reduced by using the magnet wedge, but the starting torque decrease by means of increasing of leakage reactance.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1196-1198
• /
• 1992

In field oriented control of Induction motors, speed sensor is required, which reduces the sturdiness of drive system and together with the expenditure of hardware for faultless transmission and processing of sensor signals it causes considerable expenses. These expensive sensors can be replaced by speed sensorless concept. And for good control, the knowledge of the rotor flux component of the rotor resistance are needs. Thus, this paper is based on a Extended Kalman Filter( EKF ) that estimates the state variables that are required for the control by only measuring the line voltages and currents of the machine. The rotor time constant and speed estimated by the EKF shows satisfactory agreement with the real values, with the simulation approaches.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.195-197
• /
• 1997

In this paper, the optimal design of interior permanent magnet synchronous motors for electric vehicle driver system is achieved to maximize the torque in constant torque region. Initial design is peformed taking into account load characteristics of electric vehicle and we use sequential uncostrained minimization techniques. In the results, the torque in constant torque region is improved about 13.5%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.425-430
• /
• 2014

This paper presents a design technique to improve the power density and efficiency of a permanent magnet high-speed motor by using the mono-PM rotor. The suggested model minimized rotor diameter and stack length which have a bad influence on shafting in the high-speed operation. Conventional and suggested motors are analyzed and compared by using FEM(Finite Element Method) to verify the effectiveness. The overall performance such as torque, losses, efficiency and power density and so on are investigated in detail. The results of the analysis deduced that the suggested mono-PM rotor design is superior to the conventional one.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.613_614
• /
• 2009

Electric power steering(EPS) has many attentions such as fuel consumption improvement, thus it has been widely adopted for automotive application in recent years. In the EPS system, torque vibrations are directly transferred through the steering wheel to the hands of the driver. Hence, the design of PM motors for the EPS should be performed in order to reduce torque ripples including cogging torque. In this paper, Surface mounted Permanent Magnet Synchronous Motor(SPMSM) is designed to reduce torque ripples and cogging torque at a same time for the EPS propulsion and the design results are verified with the experimental ones.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.881_882
• /
• 2009

The purpose of this paper is Characteristics Analysis according to thickness of Secondary Conductor in Tubular Linear Induction Motor(TLIM). Linear motors make good used of several applications as pumps and linear actuator. Characteristic equations of TLIM are obtained form voltage equation. And parameters of voltage equation are calculated.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.816_817
• /
• 2009

Optimization of geometry is one of the most important design process of the electrical motors. Tooth and yoke width are important variables that can maximize back emf and load torque among various design parameters. In this paper, in order to design the tooth and yoke width effectively, an equivalent magnetic circuit of one pole is constructed and an optimal value of tooth and yoke width resulting minimum reluctance are determined instead of a finite element analysis(FEA) that is time consuming.