• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.158-165
• /
• 2004

The DC motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motor.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.6
• /
• pp.355-365
• /
• 2019

Objectives: In rural areas of Korea, where public transportation infrastructure is lacking and alternative systems are poor, the elderly experience inconveniences in using healthcare, although their need is high. This study aimed to analyze the association between the convenience of transportation and unmet healthcare needs among the rural elderly. Methods: The data used were collected in the 2016 Community Health Survey among rural elderly individuals aged 65 or older. Dependent variable was the unmet healthcare needs, explanatory variable was the convenience of transportation. The elderly were divided into 3 groups: with no driver in the household, with a driver, and the elderly individual was the driver (the self-driving group). Covariates were classified into predisposing, enabling, and need factors. They included gender, age, education, income, economic activity, household type, motor ability, subjective health level, number of chronic diseases, anxiety/depression, and pain/discomfort. The data were analyzed using logistic regression and stratification. Results: A significant association was found between the convenience of transportation and unmet healthcare needs. When examined unadjusted odds ratio of the group with a driver in the household, using the group with no driver as a reference, was 0.61 (95% confidence interval [CI], 0.54 to 0.68), while that of the self-driving group was 0.34 (95% CI, 0.30 to 0.38). The odds ratios adjusted for all factors were 0.69 (95% CI, 0.59 to 0.80) and 0.79 (95% CI, 0.67 to 0.91). Conclusions: We confirmed a significant association between inconvenient transportation and unmet healthcare needs among the rural elderly even after adjustment for existing known factors. This implies that policies aimed at improving healthcare accessibility must consider the means of transportation available.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2009

In this paper, when wheelchair user get into the vehicle, we have thorough grasp of the problems of loading wheelchair and give effect to suggest conceptual design in relation to develop manufactured goods. We choose 50 participants with disabilities who manual wheelchair or motor scooter users are able to drive own's vehicle, and the method practice in the direct survey. There are some limitations in this study especially in terms of the sampling population. The 88%(n=44) of the participant replied to the driver with disabilities need assistive devices for loading manual wheelchair. They prefer a system that robot arm brings the wheelchair out of the trunk to the driver's seat door.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.128-137
• /
• 2006

Traffic accidents occur due to complex influences of transportation companies, drivers, and road environment. This study found that education and surroundings for transportation companies, driving habits of drivers, and road safety facilities and accessory facilities were main factors that affected strongly traffic accidents. Also, it found that driving habits of drivers could affect accidents heavily more than two other factors. Road safety and accessory facilities were analysed that they affected traffic accidents independently with transportation companies and their own drivers. Therefore, in order to achieve a traffic accident prevention as our main target, those companies need to produce atmosphere that their own drivers can have safety awareness, and related institutions for the above target should run parallel with policy assistance and strict traffic enforcement. In the end, this study suggests that transportation companies should secure manpower wholly being charged with traffic safety and financial resources investing in it.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.719-720
• /
• 2006

In the mechanical system, optimization of motion control is very essential in the aspect of automation technique progress. In the servo system, the function of controller is very important but most of the controllers have played only the role of pulse generator because the controller with main function is very expensive. In this thesis, the system was composed of PC, commonly used driver AC servo motor and a produced control board. The PC transmit a gain, a locus data to a driver and controller. At the same time, it converts imformation from the controller and convert them into data and offer an output with graph. The role of a controller is to trasmit a locus data to a driver and counting the pulse on the phase of an encoder to the PC. We have performed the experiment in order to confirm with variable PID parameter capable of the optimization of gain tuning with the counting of feedback control sensor signal with regard to the external interface into the system, such as torque. Based on the experiment result, we have confirmed as follows: First, it was confirmed that we could easily input control factors P.I Gain, constant $K_P,\;K_I$ into PC. Second, not only pulse generator function was possible, but with this pulse it was also possible to count using software with PIC chip. And third, using the multi-purpose PIC micro chip, simple operation and the formation of small size AC Servo Controller was possible.

• Journal of Sport and Applied Science
• /
• v.8 no.3
• /
• pp.1-6
• /
• 2024

Purpose: This study aims to verify the effectiveness of acute anodal transcranial direct current stimulation (A-tDCS) using Halo Sport headset device on golf performance in professional golfers. Research design, data, and methodology: Eight professional golfers who voluntary participated in high-level golf tournaments were recruited in this study. They attended one single-session intervention which was stimulated by Halo Sport headset device (n=8). The A-tDCS halo sport session lasted for 20 minutes and stimulated on the motor control area of the cortex (M1). Four golf swing performance tasks (driver, iron, 100-yard shot, 50-yard shot) were performed before and after halo intervention. Key indicators of golf swing performance (Club Speed, Face Angle, Ball Speed, Smash Factor, Spin Rate, Side, Carry, Total) were collected by Trackman launch monitor. Results: In Halo session, there were no found statistical significance in driver, iron and approach (100, 50 yards) after intervention (P<0.05). Even some of variables (face angle, smash factor, carry and total distance) in driver, distance accuracy of 100 yards and direction accuracy of 50 yards were slightly improved tendency, but it was not significant (P<0.05). Meanwhile, there was any enhance all of variables in iron. Conclusions: As a result, the current study concludes that the acute A-tDCS halo sport intervention has no effect on the positive golf performance improvement for professional players. Further implications were discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.764-769
• /
• 2004

The DC Motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC Motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC Motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motors.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2101-2103
• /
• 1997

In this paper, micro step driving method is used for a high performance motion control and minimizing of vibration in a industrial X-Y table. By using a mathmetical analysis method of 2 phase Hybrid-type step motor, each phase current can be optimized about unit speed and torque. We can improve the electrical and mechnical driving charicteristic of machine by applying this proposed driver to the real plant using microprocessor.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2149-2151
• /
• 1997

Open loop microstepping control of two phase hybrid step motors provides enhanced step resolution, smoothness of operation, and removes most of the objectionable resonance phenomena. In this paper, we discuss the technigues about design and implementation of microstepping driver of two phase hybrid step motors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.1
• /
• pp.75-81
• /
• 2000

To provide the appropriate direction for development of transient control in a gasoline engine, transient performance analysis and evalution under four accelerating types based on typical driver's acceleration type were implemented by experimental study. In order to evaluate the characteristics of transient performance quanititatively, the concept and method by transient response specifications were introduced. Several performance parameters in terms of engine speed(RPM), manifold absolute pressure(MAP), fuel injection duration($\DeltatI_{nj}$) and air excess ratio($\lambda$) were emasured simultaneously during the four types of the throttle valve opening with the step motor controlled by PC. The result showed that transient response specifications in terms of delay time, rising time and settling time characterized the transient performance for four acceleration types quantitatively. Intensified acceleration type was most economical and linear acceleration type revealed the best emission performance.