• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.354-356
• /
• 1994

This paper describes a drive circuit and control method for SRM motor with maximum torque region. The proposed switching method is tested by experiment on single salient type SRM motor. As a result, The SRM drive with the proposed scheme is effective in increasing of torque region.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.530-534
• /
• 1989

In this paper we addressed the basic concept of microstepping, analyzed the combined effect of the motor detent torque and the current profile, and implemented a microstepping drive system using an one-chip microprocessor, power MOSFET's, and a 1.8 degree bifilar-wound hybrid-type step motor excited by a bipolar drive. Experimental results show that microstepping produces greater resolution, eliminates resonant step loss, and reduces motor vibrations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.80-86
• /
• 1993

This paper presents an advanced AC drive system used in electric vehicles. The system consists of a drive motor, a PWM transistorized inverter, a PCL-812PG data card, and a controller. This paper describes a design method for RSPWMSS and PID controller. This controller system is implemented on computer and applied to drive motor(induction motor), yielding satisfactory result.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.34-39
• /
• 1998

This paper describes the simulation approaches employed for a vector control system of induction motor drive using SIMNON for windows program. SIMNON program tool can solve differential and difference equations for nonlinear dynamical control system. One powerful feature is its ability of allowing integration of individual program modules after each individual module is programed and tested independently. This particular feature is exploited here for an SVPWM inverter drive by real-time modeling and simulation. The suggested programs are provided a simple and complete simulation for induction motor vector drive system.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.155-159
• /
• 2009

Recently, a Elevator system is specially important in human life. Also a elevator door is important to a elevator system. In this paper, induction motor drive system using vector control was developed with high performance for elevator door system. For this, velocity pattern generation method was proposed. The proposed system is verified by experimental result with 400[w] induction motor drive system for the elevator door.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2277-2279
• /
• 2001

This paper describes a vision-based steering control method for AGV which use dual motor drive. We suggest an algorithm which can be detect the guideline quickly and exactly for real time vision processing, and control the steering through an assign the CP (Control - Point) of input image. This method is tested via a IAGV which dual motor drive with a single camera in laboratory environment.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.58-60
• /
• 1998

This paper analyzes the torque characteristics with the structure of harmonic side drive motor using by F.E.M and conformal mapping method. F.E.M and conformal analysis result are almost same. Through the results, we investigate how do design parameters variation affect torque characteristics.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.3
• /
• pp.279-288
• /
• 2004

This paper presents a novel design for a tubular linear brushless permanent-magnet motor. In this design, the magnets in the moving part are oriented in an NS-NS―SN-SN fashion which leads to higher magnetic force near the like-pole region. An analytical methodology to calculate the motor force and to size the actuator was developed. The linear motor is operated in conjunction with a position sensor, three power amplifiers, and a controller to form a complete solution for controlled precision actuation. Real-time digital controllers enhanced the dynamic performance of the motor, and gain scheduling reduced the effects of a nonlinear dead band. In its current state, the motor has a rise time of 30 ms, a settling time of 60 ms, and 25% overshoot to a 5-mm step command. The motor has a maximum speed of 1.5 m/s and acceleration up to 10 g. It has a 10-cm travel range and 26-N maximum pull-out force. The compact size of the motor suggests it could be used in robotic applications requiring moderate force and precision, such as robotic-gripper positioning or actuation. The moving part of the motor can extend significantly beyond its fixed support base. This reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a spatially constrained environment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.25-29
• /
• 2004

This paper is to research about design and drive system of a switched reluctance motor for a pallet truck application. SRM is suitable for a pulse type source and is researched for home and industrial applications owing to the advance of power electronics technology. An SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness and high efficiency make it possible to replace with DC motor which is used in a pallet truck conventionally. Test results show that pallet truck with SRM has better drive characteristics than that of the DC motor performance.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2011

In this paper, a four-phase 8/6-pole 4-kW SR motor drive model is presented. Based on experimental data, the model allows an accurate simulation of a drive in dynamic operation. Simulations are performed and a laboratory type set-up is built based on a TI TMS320F2812 platform to experimentally verify the theoretical results obtained for a SR motor. To reduce acoustic noise and to correct the power factor of this drive, a two-stage power converter is proposed that uses a current source rectifier (CSR) as the input stage for the asymmetrical converter of the studied SRM. Employing the space-vector modulation (SVM) method in matrix converters, the CSR switching allows the dc link's capacitors to be eliminated and the power factor of the SRM drive to be improved. As the electrical motive force (emf) is directly proportional to the rotor speed, the input voltage to the machine can be programmed to be a function of the speed with the modulation index of the CSR, leading to a reduction in the acoustic noise of the SRM drive. Simulation of the whole SRM drive system is performed using MATLAB-Simulink. The results fully comply with the required conditions such as power factor correction with an improvement in the THD.